d&h was founded in 2000 by Mr. F. D`Emma, B. D`Emma and Mr. Holzinger. All three have more than 20 years experience in the field of plastic processing.
It starts with the production of high precision PUR gaskets with the so called injection-stamping treatment.
Due to the very good development of our business, d&h decided to built a new prduction facility. In the middle of 2009 we moved into our new building which gives us all the necessary environmental to proceed our growth.

TERNPLAS was founded by Ergün Toprak, a native of Baden-Württemberg in Germany, and with his German industrial expertise in the automotive industry, he runs the production site in Ankara / Turkey with enthusiasm.

TERNPLAS supports its customers with technical and manufacturing innovations. With unparalleled technological expertise in machining, mold construction and plastic injection molding, it is a proven supplier of high-quality and complex parts as well as development and service partnerships for customers in the automotive, medical, defense and general sectors.

As a development and service partner, Ternplas accompanies its customers in the selection of design and materials and, through close, professional exchange, achieves the best solutions and cost-effectiveness.
Ternplas produces worldwide for its customers with the most modern machines and systems with efficient, high quality and robust processes in series production.

We make our important contribution to the continued success of our customers.

Our customers appreciate and benefit from our lucrative services from development, series production to logistics with advantageous production costs in Turkey.

"The key to our success is the success of our customers"

Dickinson Philips Ltd is an injection moulder that offer a one stop shop for plastic components. We can take any project from early conceptual stages through to mass production, working closely with a number of UK and overseas toolmakers to accommodate all new projects. We’re happy to work from a simple sketch or sample, through to advanced CAD models. Low cost in-house 3D printing facilities are available for prototype evaluation.

Our company name, Model and produce of forms, one thinks, that we only models produce, but the models produce is only one part of our offer. We adapted to the individualized customer requirements and extended our offer in the last 10 years very much.

I would like to present our far offer spectrum here only briefly to you, if you permit.

An emphasis our activity are laser weld and cuts. Here we make series, small series and unique pieces. Like e.g. laser cut of segments made of High-grade steel and parts or segments made of steel and aluminium plates or the 3D cut from construction units. Or like the 3D laser welding of building groups made of steel or aluminium parts, like e.g. housings or building groups. Our customers are e.g. automobile suppliers and metal enterprise, like the machine producer.

We operate our classical field of activity, the support during of the product development, particularly in the produce of the prototypes, further operate in a extended form. The fast manufacture from new or changed construction units, Design models, test models, test objects or functional parts, which in small number of parts are needed and in products for the customer or for testing and are inserted for a construction units, belonged to our offer. Clips, laminates, armature boards, also plastic and aluminium parts for Seats, covers, grasp, flange, attachments or housing and much more from plastic, wood, aluminium or other not iron of metals. Our largest customers within this range are car manufacturers.

They see a very broad spectrum which we offering and that are not yet everything.

Within the plastic range we continue to offer, small series and special productions, on basis of rapidly prototyping (FDM), low pressure injection moulding (RIM), laminating technology and casting technology. This range is interesting for enterprises the one very much individualized product offer offers or if the preparation of series tools too unprofitable for the number of items. We offer a flexible, fast and more economical alternative. In these ranges our customers are e.g. equipment manufacturers or suppliers and machine-builders.

In the forms-, gauges- and tool- construction we produce e.g. first models, foundry models, silicone forms but also, pulling plants, devices, as well as stamp and knocking tools.
In the model construction we continue to offer the preparation of individual units, small series and unique pieces or - parts, from wood, plastic and aluminium to range for the equipment goods-, designer-, model-, Interior-. Those are e.g. ready for use parts, units or segments, which are not manufactured due to its individual form and smaller number of items in series, since the expenditure for it is too large.

When mostly CAD data serves basis, from which in our technique centres the individual products develop. Around precision and quality to determine, we offer Measuring logging and - data at the end.

h3> For over 80 years we have experience with precision springs, wire and strip bending parts. This is what makes us learn. /h3>

Since there are many possible applications for our products include nearly every industry to our customers. We process all common spring materials and special materials. Our extensive stock in the materials, short procurement channels and ensure efficient production for short-term availability. State of the art machinery, flawless materials, own tool manufacturing, qualified staff and stringent quality control ensure you that our springs deliver what they promise.

Custom engravings, careful explanations, and above all flexible delivery times are our strengths that pay off for you.


h3> So be demanding and challenge us.
We are delighted! /h3>

At our sites in Kornwestheim,and Mosbach we manufacture technical plastic injection molded parts both in large series with annual quantities of over 1 million pieces and small series with annual quantities of 1000 pieces. Efficient production lines always guarantee you the best price. The required injection molds are manufactured in our own mold shop or ordered from our network of German and Chinese mold makers. Metal parts to be overmolded are mostly purchased from our sister company located 30km away. Our customers therefore receive their plastic parts directly from one source.

On modern plastic injection molding machines we produce plastic injection molded parts from all thermoplastic materials with a weight of less than one gram up to 3kg. As an injection molding specialist, we process almost all conceivable plastics for the production of technical plastic parts. A high degree of automation of our injection molding process allows us to produce molded parts in small, medium as well as large quantities within our injection molding shop. A large portion of the injection molding machines are equipped with robotic systems and material feed conveyors.


Machinery:

We use only high-quality ARBURG and DEMAG injection molding machines for the production of your plastic parts. In total, we have access to a capacity of more than 25 injection molding machines. Injection molded parts can be produced with a part weight of 0.1g to 3000g. Injection molding machines are available for this purpose at the Kornwestheim, and Mosbach locations with clamping forces of 20- to 1300-tons.

Injection molding materials:

We can process almost any plastic material ("molding compound") in our injection molding machines. All common raw materials, such as ABS, PA, PE, PP, PET, PMMA, PC, POM, PS, ASA, SAN, TPE (in various shore hardnesses) but also high-performance plastics such as PEEK, PVDF, PSU as well as bioplastics and WPC (wood-plastic compounds) with wood content of up to 70%.

Of course, all individual colorings are possible as well as the equipment with various additives (UV resistance, antistatic, etc.), fillers (glass fiber or glass ball) and of course also in V0 equipment (fire protection and glow wire resistance).

We are looking forward to your inquiry!

Production of technical rubber products

Our strengths:

rapid quotation
flexible order processing
short delivery time

We see ourselves as a partner to our customers:
Joint development of articles of rubber
Advice on the design
Selection of the appropriate rubber quality
Selection of that manufacturing process, which promises to be an optimal ratio between the tool investment and unit price

The DMT Product Development GmbH is an independent development partner for innovative product solutions. With a team interdisciplinary thinking employees are developed in addition to the core competencies of leading companies, medical, instrumentation and fuel cell systems, from the idea to the approved competitive product. On the basis of our sound know-how and process-neutral development, we assume a highly structured approach, the responsibility for the successful implementation. As a partner of successful companies, we take a holistic project management functions for complex mechatronic product development.

Translation by Google Translate

We see ourselves as all-round service provider in the field of plastics technology. From consulting to prototyping, mold and tooling to manufacturing assembly and dropship we offer our clients comprehensive solutions and services from one source. Our particular strength lies in the quality and performance characteristics of our production. In addition to our top technical equipment we use only the best-prepared materials. Our specialty is the high gentle drying of various plastics.
The relevant specialized and trained staff are employed at the place in the company. The motivation of our team is the long-term guarantee that our injection molded parts arrive on time and in the required quality at the customer.
Especially in small quantities, flexibility and speed is our strength.

We are your reliable partner for the following areas:
Tool mold
Plastic injection
Punching and bending technology

We manufacture according to DIN EN ISO 9001-2000 and offer our customers:
Expert advice
Product Design
Tool design
Surface finishing
Hot and pad printing
Assembly

As market leader in the ventilation technology sector, DOSPEL has 46 years of experience on the ventilation market and is one of the most recognizable brands in the industry. The dynamic development of the company established its position as the market leader in the field of ventilation technology and the export of products to over 50 countries only strengthened this position. Thanks to a wide range of products, DOSPEL dominated the Polish ventilation market. The range includes many models of home fans, which not only ensure good air quality, but can also be aesthetically adapted to the interior design. DOSPEL also offers fans for industrial plants, ventilation system elements, ventilation systems with heat recovery and ventilation and air conditioning units for your company. Our R&D team follows the latest technical and technological solutions and is constantly working to improve the design, durability and functionality of our products. DOSPEL's quality is proven by numerous certificates.