We specialize in the design and construction of injection molds for thermoplastics and thermoset and pressing tools for thermoset. We also like to engage you in terms of contract manufacturing and repair under the arms.

Our know-how is the result of almost 125 years of combined experience.
In our plants in Germany, the Netherlands and Hungary, we manufacture a wide range of plastic moulded parts such as PVC-PE-PP moulded parts, manhole bases & manhole connections, gullies and accessories for our European customers. Our products are available in almost all shapes and diameters, even unusual ones. From small and less common to extra large.

We use various materials like PVC, PP, PE-HD and Polystyrene for our high quality pressure parts to ensure the highest quality. All BT Nyloplast production facilities are certified according to ISO 9001, ISO 14001 and ISO 50001. This means that we meet the most important European quality requirements.

At BT Nyloplast we work closely with our partners so that we can always supply the right fittings for all types of pipes. We respond flexibly to our customers' needs and develop the right type of fitting in close cooperation with them. In this way, we guarantee a durable and reliable connection of all types of plastic pipes, taking into account the product's service life.

We employ a total of 300 people at our three production sites in Europe.

Manufacture of fasteners made of plastic:

Screws, washers, nuts, spacers, washers, knobs, handles, Plastimont, Plastomet, leveling feet, cable ...

Manufacturer of nylon and plastic fasteners :
screws, washers, nuts, spacers, plugs, handles, etc.
Materials : PA PE PP PC etc.
Stamped parts, cable glands, adjustable feet, special parts.

BUNAY S.A. is a Bulgarian private company registered at Pazardjik District Court in 1999.

The company is located in the town of Panagiurishte, which is 90 km away from the capital Sofia and 80 km away from the town of Plovdiv.


BUNAY S.A. manufactures details of plastics, bekelite and rubber well as moulds for their

production with well knoun methods of production- injection, press moulding, extrusion,

back pressure injection with turnover about 2.6 million EUR.

Considerable part of the production- 70 % is exported in England, Belgium, Italy, Czechia,

Turkey, Albania and Japan.

BUNAY S.A. has the following competitive advantages:

- 190 highly qalified engineers, specialists and workers specialized in processing of thermoplastic

and thermoreactive polymers by injection, press moulding and extrusion.

- long time experience, specialization in processing of the following polymers: Polyethelene PE;


- good equipment from European producers- ENGEL, BATTENFIELD, ITALTECH, BIRADGI, KUAZY,

SANDRE, FORMOPLAST-

50 moulding machines with the weight of moulded part from 5 gr to 5 kg and projected area from 2mm2

to 9000 cm2.

The machines are distributed according to their clamping force as in tons, as follows:

1. to 100 tons- 16 pcs

2. from 100 tons to 250 tons- 7 pcs

3. from 250 to 420 tons- 18 pcs

4. from 420 to 1000 tons- 9 pcs

BWC International has many years of practical experience and contacts in the manufacturing sector of components (eg, stamping, plastic injection molding, die-casting technology) and associated molds.

Our suppliers are located throughout Europe, Turkey, China, Taiwan and South Korea.

We support our partners in finding suitable suppliers and the project management.

Further information at www.bwc-international.com

Call us at info@bwc-international.com

CAFAC - RUBBER PRODUCTS AND SYSTEMS FOR THE RAIL INDUSTRY
Cafac studies and provides rubber products and systems for equipment used in the transportation of passengers, goods, freight and energy. Our core busines is the manufacture of fire resistant door belts and window gaskets. The railway sector is our primary market. Our products are installed in bogies, floors, interiors, seats, roofs and pantographs.

Cafac's history is built around satisfying a wide range of industrial needs. Since 1949 Cafac has introduced and extended all of its conventional rubber processes, including:

extrusion
welding
hose making
moulding
plastic rubber injection moulding (TPE)
polyurethane VULKOLLAN® casting
Each of our workshops manufactures rubber parts of varying sizes and densities that can be bound with steel, aluminium, or plastic. Cafac has conceived an "over-moulding system" which can wrap rubber around cable or insulate EPDM for use in medium and high voltage electrical plugs or special surge arrestors.

Cafac has a 7-strong development team, 5 of whom are engineers researching solutions tailored to customers' requirements. Our strength is both in the ability to provide all kinds of new rubber parts as well as in helping customers to reengineer existing parts - for example when metallic parts are replaced with thermo-formed or roto-molded parts to increase performance, reduce weight and operating costs. We have designed products as varied as finger protection systems, seat wedgings, roof and floor wedges and a selection of rubber carpets.

RUBBER PRODUCTS
We offer a wide range of rubber products that meet flame-retardant standards in the USA, France, UK, Germany, Poland, other European countries and Asia.

After a two-year development program, Cafac has produced the 742 T, a halogen free, non toxic, extrudable and vulcanizable rubber product using hot air. This new product is flame retardant for 20 minutes under 800°C and will keep its suppleness up to -40°C. A classical halogenated rubber is breakable -20°C

Our other rubber product, the 444 T, is also EPDM-based with silicone fire retardant qualities. These properties are particularly useful for the Trans European trains where outside temperatures fluctuate greatly.

Like its silicone rubber counterpart, Cafac's EPDM products meet all British Fire Regulatory Standards. However, whereas silicone rubber is incapable of withstanding the combined weight of passengers and luggage, our EPDM products (742 T and 444 T) offer high mechanical resistance, and are therefore a superior choice.

REFERENCES

Cafac today manufactures window gaskets and door sealings for the Virgin West Coast Main Line and cross-country trains using its 742 T and 444 T products. Alstom, Bombardier, Amtrac, Siemens, Adtranz, Fiat, Euroshuttle, Faiveley Transport, Westinghouse and SNCF also use our products. SNCF gave Cafac a number 14, AQF 2 certification, making us the first rubber manufacturer to be certified in France.

Cafac's rubbers are also used in shipbuilding, buses and lorries, travelling cranes, telepherics, specials cars, amusement parks and a wide range of other activities. Our vision is to be your first partner in jobs requiring rubber products and systems

istanbul moud base company www.cagdaskalipcnc.com.tr

Camo: Comprehensive know-how and in-depth consulting services around the areas of tooling, molding and assembly. Planning, design, optimization, manufacturing, packaging and assembling come from one source. System support for our customers, for optimal and high-quality result over the entire manufacturing process time.



Since 1988, we bring these basics, which is also in our company slogan "Camo - Add form" reflect successfully to customers. From this viewpoint results in long and fruitful collaborations with companies such as Philips, Inter norm or Bombardier-Rotax. In 1997 he was certified to EN ISO 9001. All this has led over the years to a continuous business growth. Today a total of 150 employees work on a constructed area of 6,500 square meters at the main factory in Swan City / Upper Austria. Further expansion guaranteed!

For over 40 years, the producer group CANEXPOL & Zych in the Republic of Poland
great success injection molded parts in technical and consumer demand forth. We have outstanding technical know-how, our own tool and Spritzugssmaschinen from 60 to 600 tons of clamping force. We offer both the realization of concrete technical specifications and the implementation of product ideas from the project to the finished product from a single source. We provide customer support in German and English surely spot in Germany.

The company - triple-easy


Carl Muller, is a company with three separate focal points and one goal: to provide our customers with ripe (mature) and comprehensive services.

What made the bold use of the opportunities is developed historically, today offers a variety of services, the elements of which our customers can use individually, but opened their unusual combination options:

Consultation, which begins in product development and design
Comprehensive services from design through to die versatile production
Comprehensive services to logistics partnership and "just-in-time" delivery of products and components
About 60 qualified and motivated employees work at the two locations Lüdenscheid and Altena for customers for the following industries:

Automotive, automotive and vehicle industry
Sanitary industry
Electrical engineering and lighting technology
Promotional Products
Furniture industry
Aviation
Sports and leisure industry
When may we be of service to you?