ForgingCastingSolutions - We bring your construction into shape!

You have the drawing and we have the right foundry or blacksmith.
We procure your parts for you internationally at good conditions as requested and deliver them to your warehouse on time. These can be raw parts or machined parts. Also electroplated or hot-dip galvanized or painted.
Do you need detailed advice on the choice of materials, design or implementation of existing welded and milled constructions for new cast or forged parts? Then you are right with us.
Would you like to have all parts of an assembly fully assembled? No problem either.
We take care of the quality, the right packaging for sea or air transport, customs clearance and then deliver the goods to the desired delivery location. Also with special packaging requests such as printed cardboard boxes or the like.

With our experience for more than 10 years, we try to make everything possible, please contact us.

Production of rotationally symmetrical rotational parts 12-65 mm in diameter from all machinable metals.
Our specialty is the machining of stainless steel materials (from 1.4021 to 1.4571).

Sample parts can be found at: www.rommel-praezisionsdrehteile.de

In modern CNC lathes with Alligator - Spindle or counter-rotation symmetric turned parts from a variety of metals are produced. These high demanding precision turned parts are manufactured according to customer requirements as a single series parts or assembled into smaller modules.

Typical batch sizes of 100 - 30,000 pieces.

Processing options

- CNC turning
- Polygonal
- Eccentric rotating
- Milling
- Drilling, reaming
- Threaded drill, chasing
- Knurling

Heat-treatment

- Hardening, pay etc (see services)

Suitable materials are

- VA of 14021 to 1.4571
- Machines Bright Steel
- Quenched and tempered steel
- Stainless Steel
- Brass
- Aluminium
- Special materials such as titanium

Touch up

- Install
- Vibratory Finishing
- Deburring

Surface treatment

- Galvanize
- Nickel
- Chrome plating
- Brown
- Phoshatieren etc (see services)
- Vibratory Finishing
- Deburring

Are conditionally suitable

- Refractory materials
- Heat-resistant materials

The firm Rompa CZ s. r. o. belongs to the significant producers of plastic products, thermoformed packaging and tools for both technologies. Rompa is member of Rompa Holding operating worldwide: NL, PRC, HK, CZ, US.
Rompa CZ offers complex services in the field of injection moulded products ranging from design of products, designs and production of tools, production of plastic parts to finishing and assembly operations. New thermoforming lines serves for production of packaging materials. We offer complex solution in plastic processing.

After the restructuring of a named plant and machine operation at the Lübeck site was found in April 2005, the chance for a hopeful new beginning by the foundation.
Today, the entire team is almost changed into the company launched. Within the first years of the workforce from 11 has risen to 55 now.
The combined expertise and years of experience make RONO to a successful partner.

In our company's contract manufacturing guarantee skilled professionals - including engineers, technicians, foremen and skilled workers - from planning, through production, to assembly on a production area of 2500 square meters is an optimal order processing.

RONO is the ideal partner in the solution of various tasks in the field of metal processing.

We offer the following services:

• ROTATE
• MILLING
• DRILLING
• SPECIALIST WELDING-PED Certified HP0-AD2000
• ASSEMBLE
• ASSEMBLY PRODUCTION
• BEHÄLTERBAU
• ROHRLEITUNGSBAU
• REPAIR SERVICE

Through constant innovation and calculated investment in our machinery RONO was for many companies in the economic region of North became the epitome of modern production technology.

Our service focuses on the contract manufacturing using advanced machines, focus on and austenitic and duplex steels, as well as non-ferrous metals and plastics are not alien to us. Surface treatments provide for us is not a problem
Our competent performance serves the areas of general engineering, steel construction (frame, racks and welded assemblies

We are a young and ambitious company that is steadily since 1999 growth.
In our new workshops tailored systems that exactly match the individual requirements of our customers arise.


On most modern CAD workstations and CNC machines we put your wishes fachgrecht.



Our Strengths - Your Benefits


Everything from one source


Our strengths

- Development, design and manufacture of special machines, production parts and prototypes
- Own production of necessary resources, such as clamping and mounting devices
- Edit the components on CNC machines
- Procurement of purchased parts
- Complete assembly of components / assemblies
- Delivery


Your advantage

- Complete systems from a single source
- Professional solution to your problem
- Wirtschafltiche prices
- Fast turnaround time
- Very high flexibility
- Druchgängiges quality concept

Rosco Eko-Tech Sp. z o.o. is an engineering company established on the European market in 2009 as an independent subsidiary of an enterprise operating mostly on the German market, i.e. Rosco Polska Sp. z o. o. since 1994. The main direction of our operations is comprehensive services in the field of supply and installation of steel devices and structures. From the outset of our operation, we work for European customers offering them the best Polish performance verified by the experience of many years. We products of the highest quality acquiring the trust of customers. We especially try to assist with the optimisation of technological processes and implementation of environmental protection solutions.

We are a family company that has been manufacturing prototypes and special tools with the highest quality and reliability for decades. In doing so, we rely on the expertise and experience of our specialists — paired with the latest tools and machines.
Founded in 1990 by Werner and Jens Rosemann, the company stands for professional advice, planning and implementation of cutting production.

Our company stands for short delivery times, dimensionally accurate sheet products at a fair price. Our strength is to provide you a solution-oriented in the implementation of your project and competent advice.

From us you will receive your sample and small batch parts and large batches of parts with the technological properties of your choice within a few days. Convince yourself of our work yourself and opt for a company that meets your expectations!

We are: A mid sized injection-moulding company with own toolshop
Subsidary in Romania
Assessed according to DIN EN 9001:2000 and ISO/TS16949
Turnover: 10 Mio Euro
Employess: 65, whereas 10 are in tooling and design departement
Productiona area: 2.800 m²
Presses: 28
shot weight: 0,5 up to 450 gr
Materials: technical thermoplasticss: PA, PBT, ABS, POM, LCP, TPE,
heavy duty thermoplastics: PPA, PPO, PPS, PEI, LCP
in varying colours and fillers

Focused on following branches:
Automotive
Electromechanics

Dental care

Our power is:
Custom made connectors (also with insert molded contact elements)
Insert/Outsert, with robot operation if applpicable
Assemblies (even high quantities) wit automation and automated 100% inspection EOL
Vanity parts (e.g. hoods or bezels)
Thin wall parts (e.g. housing parts for sensors)
Guide rails (stretched parts with high requirements on straightness)
Injection moulded miniature parts

Our company is engaged in the loading and processing of metal and metallic semi-finished products, mainly as a supplier to the classical mechanical engineering and the automotive industry. Equipped with the latest CNC technology, we are able to:

LASERS, EDGE, WELDING, CUTTING, FINISHING

We manufacture according to customer requirements as well as individual series products.

Due to the wide variety of manufacturing technologies from a single very fast customer orders can be processed.

Our company was founded on May 3, 1990 and currently employs 40 people.

We are constantly striving to incorporate new technologies and production processes in our company to the future for our customers to achieve optimum quality and production diversity.

Services

Mill
We have various CNC milling machines, including on a machining center Deckel Maho P 125, as well as a milling center from Hermle C40.With these 5-axis machines, we are able to perform complex 5-page edits in one setting.

Turn
In modern lathes we can produce any kind of turned parts.
It does not matter whether it is single or serial parts.
We manufacture small parts with bar conveyor to be cost-effective but also large parts with a maximum working length of 3000 mm and a workpiece diameter of max. 450mm.

Lasers
We have to edit 3D three laser cutting machines from Mazak in use and are therefore capable of 2D parts on lasers and laser technology. Furthermore, we can see to edit pipes with a diameter up to 150mm and a length of 6000mm. From us all popular file formats are readable.
However, in order to manufacture series parts and items more efficiently, we use a linearly driven laser system with fully automatic loading and unloading, with even high-speed lasers for stainless steel is possible.

Maximum processing size 3000 x 1500 x 2000mm 6000 in cooperation.

Bending
Our Bending of Amada, it is possible to further process previously lasered parts or perform work for you in salary.

In our press brakes and bending machines are in use
to respond flexibly to the needs of customers.

For use comes as a 220to press Amada with a max. Bending length of 3340mm.

Welding
Whether aluminum, steel or stainless steel, we are the right partner for welding.

Constantly monitored by a European Welding Engineer from our company, we guarantee our work.

On request, we also supply a certificate of certified ultrasonic, magnetic particle or X-ray welds.

Our factory is certified by welding according to DIN EN 729-3.

Finishing
With us you get their components as desired also polished finished.
The following surface treatments we can offer you as a service with.

Painting, powder coating, electroplated galvanized, hot-dip galvanizing, burnishing, chrome plating, phosphating

If you need any other not listed here, surface coating, please contact us to it.

Assembly
When Roessler GmbH you will not only manufactured items, but supplied on request also fully assembled modules. It does not matter whether it is mechanically manufactured parts or sheet metal parts, such as in an enclosure.

Ros company was founded in the early 80s, and since that time we have been supplier for sheet metal components. During the years we optimized and improved our production process, investing in machineries and tools of new generation to satisfy the most compex market's requirments. Thank to this, we are specialized in supply finished products, completed with surface treatments and assemblies.

The production processes we do internally are:

- laser cutting (max dimension 2000x4000mm and thickness up to 20mm)
- bending (using robots that can move up to 200 kgs), panel bending and calendering
- tig / mig and robot welding
- powder coating
- assembly of finished products, completed with mechanical, electronic,.. parts

Our production floor is of 12.000 sqm and there is trained and qualified personnel working inside. Furthermore, the costant investments on tools and machinery, let us became qualified supplier for important European companies that work in different sectors (textile, naval, logistic, agricolture,...)

1. Design
- design of stamping tools for sheet metal parts
- SW - Siemens NX, SolidWorks, Visi, AutoCAD
- progression, tandem and transfer tools

2. Tool shop
- CNC milling, electroerosion, grinding
- prouction of tools and dies
- manufacture of precise machine parts
Max. tool lenght 4000 mm, max. weight 30 tons.

3. Press shop
- progressive machanical crank presses, press power 500-8 000 kN
- sheet material thickness 0,5-4 mm
- stamping of parts for the automotive industry