The mechanical production crucible GmbH (formerly Mechanical Production Radeberg GmbH) has almost 20 years a reliable supplier of complex components and assemblies for industry and crafts.
We want our abilities and achievements in more detail representation.
Our company is distinguished by the fact that we do everything that is not only made of sheet metal, but that we deliver a complete product from one source.
This means all forward and work below as CAD design, electroplating, powders, painting, screen printing, etc. are done by us.
We offer the complete design of a product and the production according to your wishes.
Attached you will find an overview of our manufacturing capabilities.

Mechanical manufacturing area milling

Single parts, series prototypes

machining

We manufacture your workpieces with high quality on our modern machine tools according to drawing specifications or according to our own design. Due to the variety of tools available to us, we are able to cover a large spectrum and carry out the orders promptly and professionally. Starting with complicated individual and special parts, components for general machine and device construction through to small and medium-sized series.


jig construction

The field of fixture construction includes a very diverse range of tasks. Good ideas, technical expertise and understanding are among our strengths. The interaction of technical know-how, our own mechanical production and the use of standard parts from well-known manufacturers allow complex quality products to emerge from our ideas.



repair work

In the event of failure or standstill of mechanical parts or systems, we will be happy to help you.

- Short-term procurement of spare parts or production in our own production

- Preparation of cost estimates

- Carry out possible optimizations on the product

Company Profile

1978
Founded as a mechanical workshop / tool by Reinhold Scheib
1984
The ... in our own production facilities
1998
Expansion of production facilities
2005
Acquisition by Wolfgang Scheib, toolmaker and mechanical mechanics technician

Seek help from the production of small and medium series
for CNC turning and CNC milling parts?

You want everything from one source?
All in best quality, on schedule and cost?

Then you've come to the right place!

Production profile

CNC - Turning

* Lining parts and shafts of Ø 8 mm to Ø 330 mm, up to a length of 880 mm
* Threads, including taper threads
* Radial and axial grooves
* Contour machining with internal and external radii and taper hard turning

CNC - Milling

* Parts of sizes up to 1000 x 750 x 300 (no five-face machining)
* Parts of sizes up to 750 x 750 x 200 (five-sided machining possible)
* Five-sided machining
* Milling contours
* Inclined holes
Drill and mill * Thread
* Deep drilling up to 35 x D
o eg 3 mm diameter x 105 deep
o eg Ø 4 mm x 140 mm deep
o forB. Ø 7 mm x 245 mm deep

Injection systems for marine and rail diesel engines

* Plunger, nozzle nuts, intermediate plates,
* Sealing rings,
* Flapper, piston ring, thrust pads,
* Follower rollers,
* Adjusting spindles, bearing flanges, housings,
* Valve adapter etc.

Pipeline and tank construction

* Nozzle heads, reducers,
* Adapters, connectors,
* Clutches, lids, etc.

Heating and Fittings
Laboratory Equipment
Vehicle
Engineering
Mould

* laser cutting, mirco-laser cutting
* mirco-waterbeam cutting
* stamping of functional areas or driven by quantity
* coining and bending (most without any tool-costs by our tool-box and self-developed bending-technology)
* plating

ONE SINGLE-CONTACT from 3D-data to final parts - www.mechaSYS.de

Since 1987, Mechatronic has developed and manufactured electronic systems for medical devices under contracts with clients. Engineering intelligence means to us: listening, understanding and seeing things from the user’s perspective. We develop viable ideas, focusing on what is feasible.

Our company started off with the final assembly of complex optical measuring instruments for traffic applications. Today, our core business consists of measuring and control systems for diagnosis and therapy as well as electronic and electromechanical components that usually have to meet the highest quality standards. We have always fulfilled the GMP and GAMP requirements that meanwhile became the international standard for the manufacture of medical products. As a certified supplier, we guarantee to meet the highest quality standards. You can rely on us.

As our client, you are the focus of our work. Our objective is to fulfill your individual demands. This is what full-service manufacturing means to us.
We are looking forward to receiving your task definition.

innovative, metal-working company
produces components from sheet metal incl. milled and turned parts
specialised in developping solutions to realise specific requirements of customers

Optimizing the value chain of the customer:
The firm achieves this aims due to:
- counselling, support in constructing and
- designing your product
- from the prototype to series production
- everything from one source

definite technological orientation > consistent investment dicision
high degree of automation > production 365 days a year
or producing in multi-shift operations

highest quality standards at reasonable price-performance ratios

Experts for the precise machining of CNC turned parts made of aluminum, copper, plastic and other non-ferrous metals

We manufacture spare parts for serial parts that are no longer available in / as:
2D / 3D laser part
3D workpiece
Forming as deep-drawn part or hydroforming
Stamped part
Folding part
Milled part
Turned part

We manufacture and design on five workstations in Catia V5:
Testing devices
Automation in production
Measuring devices
Welding devices
Cutting devices
Assembly devices
Experimental / test stands
Test gauges
Tools

Our machine park consists of:
Laser cutting systems in 2D and 3D
Press / deep-drawing system for workpieces up to size 1200x1600 mm
Hydroforming system up to 1600 tons
Folding benches for workpieces up to 2500mm
Welding workstations for TIG; MIG; MAG for VA steels, aluminum, steel
Milling machines up to 2000 mm
Lathes
Sheet metal processing (in all variants)

Mecom combines experience and innovation in sheet metal working.
The past and the future of precision machining
meet in a machine shop that has over thirty years of Padua
experience and adopt the most modern and efficient technologies
in laser cutting sheet metal, bending, turning, milling and welding.

Production of aluminum, zamak and plastic molds. mechanical machining on die-cast parts

The MECplus GmbH is the metal, and plastic processing companies
for small and medium quantities. It is not important whether it
Single parts for appliances, samples and prototypes for the construction
should be, or small production runs.

Since its founding in 2000, offers the MECplus GmbH with 25 employees
efficient and innovative product manufacturing at the highest technical level.
We place high value on a long-term partnership
with our customers and employees.

The concept of short distances, we see significant benefits. Due to the close
Interplay of design and the individual production steps in our
House creates valuable synergies to high cost and short
Production lead times.

Individual and fast

Speed and flexibility geared to the needs of our customers
distinguish us.Through experience and routine solve our production specialists
straightforward so many futures or manufacturing problem for you.

Whether professional order processing, preparing detailed work plans
Parts documentation or initial sample reports, we left no gap in your
Production process.

For the benefit of your individuality and our performance, we are not certified -
if necessary, we ask ourselves, however, like to a single audit.

Metal and plastic processing

We consult widely, develop and produce your metal and plastic parts, as
Item or in small series. Larger quantities can, thanks to modern
Manufacturing Technology be manufactured inexpensively.

We manufacture for you:
- 5 Chiron machining centers with pallet changer
- 1 Stama 4-axis machining
- 1 Stama turning, milling center for 5-axis machining of the pole, up to 65 mm diameter
- 1 micron 5-axis center with 7 pallets
- 1 Fehlmann 5-axis center for small, precision components

Initial samples / pre-production / small batch / mass production

We support product development of active your idea about the initial sample,
the pre-series up to the first series with increasing numbers.

We are your production equipment and assist with bottlenecks from. We advise

to 1999 we work steadily and grow,
to meet the needs and expectations of our customers. We can supply virtually any type of high quality mechanical processing.
We worked and assembled parts for the aerospace industry,
where tolerances are minimal, the required quality standards are very high, and the traceability of the individual components is required.
Our customers are as different as our experience;
we can count on a group of people who understand the critical value
that a hundredth of a millimeter can sometimes have. Indeed, hand in hand
with the acquisition of new technologies, we have always implemented
and we continue to improve an appropriate quality control system.

From the components for drilling,
which go 2 km underground,
to a probe for Martian soil,
every day we face new challenges,
milling and turning complex parts and difficult-to-machine metals;
we are strong with a fleet of machines up to par, but above all with a close-knit team!

MEDA GROUP has been providing services to Turkish and global industries in the steel structure, machinery and equipment production field for more than 25 years. 

Specialized in the production of components for crushing and screening plants, tunnel boring machinery (TBM), concrete plants, and heavy-duty and construction machinery, MEDA GROUP offers technical solutions to many firms that play a leading role in the design, production and assembly of steel structures, machinery and equipment projects. 

With its production plant in Ankara, which has a floor area of 3,600 square meters, and having successfully completed local and international projects as a solution partner with its 50-strong specialized staff, MEDA GROUP is one of the few companies that have managed to combine an innovative and competitive strategy with sustainable quality.

We, Median Zerspanungstechnik GmbH, see ourselves as a competent and innovative partner towards the client, who, in addition to the construction itself, also delivers the finished and tested product.



Thanks to our own high-precision 5-axis simultaneous milling center, we can implement developed solutions within a very short time.



Due to this highest possible proximity to production, we are always right on the pulse of the product and always have an overview of the progress of the project.

We always endeavor to cover all wishes and requirements that the customer places on us. That is why we also use the latest technologies.

In addition, for projects that overlap with other areas of engineering services, we use the opportunity to draw on a pool of freelance engineers.

This means that we can always ensure that they receive competent advice and that the product you need meets or exceeds your requirements and expectations.

With this state-of-the-art positioning of our company in competition, we combine competence, innovation, quality and proximity to production under one roof. This is highly valued by our customers - for over 15 years.

We are a small, but capable machining company based in Hungary.
Quick turnaround times, tight tolerances, reasonable prices and all-round support ensure successful projects!

We are a manufacturer of high precision mechanical parts by machining processes. This exclusively as a supplier without design responsibility with emphasis in medical and semiconductor industries. For modules, we take care of the entire production to assembly.

The high quality of our products is one of the foundations of our business. With the production of complex specialties within short lead times, we want to set ourselves apart from the competition. For the future success of our company is in addition to the mastery of new technologies and manufacturing processes, the responsibility of each one of crucial importance. Together to the top in the service of customers, employees, owners and the environment, is the motto.
To achieve these goals, we maintain an effective quality management system, which ensures us as well as our customers, quality and reliability. We commit ourselves to the standards ISO 9001 and ISO 13485 and to work to preserve the effectiveness of the system upright.

Medicor Hand Instruments Co. has been manufacturing and selling various types (approximately 6.000 kind) of surgical and dental instruments in Debrecen for more than 50 years.
Main types of our products are:
knifes, scalpels,scissors (traditional or with tungsten carbide insert), hemostatic-, swab-, tissue- and organ holding forceps, dissecting and dressing forceps, needle holders, surgical hooks, retractors and spatulas, tooth extracting forceps, root elevators, periodontic instruments etc.
As Medicor has 4 pcs of CNC milling center and 1 pc. of CNC turning machine, we can use our capacity to produce other things in big quantities, as well.

MediKomp
From technical advice on the development and design to series production. With over 320 employees MediKomp stands for competence in terms of stainless steel.

Item production, assembly-ready components or complete assemblies: We offer individual solutions in medium-sized batches.

Benefit from our expertise

Customers in the following industries:
- Mechanical Engineering
- Medical
- Refrigeration and air conditioning technology
- Vehicle
- Architecture and Design
- Food industry
- Machine tools
- Pharmaceutical industry
- Computer Industry
- Electrical Engineering
- Laboratory and Analytical Techniques

Sheet metal processing
With our modern sheet metal working machinery, we offer this comprehensive technical processes
- Laser cutting
- Stamping
- Embossing
- Deburring Machine
- Edge
- Bending
- Forming

Machining
Our modern machinery from over 40 CNC milling and turning centers is the backbone of our machining.In addition, complementary technologies such as honing, flat and cylindrical grinding. The programming of the individual machines via a central programming system in order to realize your ideas quickly. Processed materials:
- Stainless steel
- Aluminium
- Brass
- Steel castings

Surface Technology
High-quality and homogeneous surfaces to customer requirements! MediKomp offers a variety of possible surface variations such as:
- Glass bead blasting
- V-2A-rays
- Grinding
- Powder coating
- Wet varnishing
- Electropolishing

Welding
Approved quality! Our welding experts are consistently trained and checked on a regular basis: so that every seam is sitting! In over twenty individual welding booths all common welding processes are used:
- TIG
- MIG
- MAG
- E-welding
- PPAW (powder plasma)
- Resistance welding
- Spot welding
- Stud Welding
- Laser Welding

Prototyping
According to your ideas, sketches or drawings we design and manufacture from concept design to series production: prototypes, first samples, custom made, test samples or pre-production parts as individual parts, assemblies, or as complete products includingElectronics.

We provide quick solutions here by rapid prototyping of plastic (ABS, FRP or CFRP).

Assembly
Based on our years of experience with the assembly of medical products, also including electrical components, we assemble your products according to your wishes and demands!

From simple assembly through to the fully assembled high quality OEM product:

We will deliver your product in the best quality!