Tecnisata was founded in 1974 with the purpose of producing goods and industrial components.
Currently Tecnisata has established itself as an important industrial reference. With an area of 2200 square meters, located in Sintra, Portugal, with a vast and modern machine pool, a project office provided by the most advance parametric software and a quality control office is currently focused on:
- manufacture, assembly and testing of special devices
- manufacture parts

Since 1985 Tecno3 s.r.l. performs precision machining such as milling, boring and turning on mergers and on steel structures, stainless steel, aluminium, cast iron, bronze and other alloys.
Examples of machined components:
Gearboxes for lifts, reducers for marine, rail regulators
V-belt pulleys
Carter lift brake
Flywheels, brake drums
Stands for automatic machines or for machine tools
Water pump bodies, oil pump bodies
Bodies for hydraulic brakes, hydraulic distributors
Boxes clutch, gearboxes
Spare parts for mining excavators, spare parts for tractors
Parts for robotics, Piston rod, CNG compressor, Etc.
All machined products by Tecno3 s.r.l., are checked with 3D measuring machine and it can be released the audit report on request.

For more than 20 years Tecnocurve has been specialized in cold bending of pipes and sections in general, whether they be made of regular steel, stainless steel or aluminum.

Tecnocurve has always been very alert to new technologies and methods related to bending in general and especially cold bending of pipes and sections, indeed so much so that it is capable of filling the most varied orders in the market pertaining to bending and calendaring in general, generating high quality output that attests to our accurately calibrated and well-tested manufacturing plant.

A meticulous feasibility study is performed by the engineering department, which furthermore assists in resolving any technical issues posed by each component, if needed suggesting alternatives depending on the equipment available, or else building any specialized equipment that may be required to perform unconventional machining assignments in connection with bending pipes.

Tecnocurve also accepts subcontracted work in sampling and/or for small, medium and large production runs.

Tecnocurve currently sells 15% of its output by value abroad, and is at all times prepared to attend to the concerns of new customers from any part of the globe. Tecnocurve takes care of handling packing and shipping for the sake of the end customer’s convenience.

Attention and readiness to act on our customers’ behalf as well as the certified quality of our wares have turned Tecnocurve into a leading firm in the custom cold bending and calendaring of pipes and sections.

Tecnoingranaggi comes from a long family tradition and over the last twenty years has become one of the leaders in the production of grinded gears and especially cylindrical and helical gears up to 350mm in diameter, max module 12.

In its 2500-sq meter facility Tecnoingranaggi can rely on a technologically advanced machine park and a very efficient tooling room. It employes 50 young and motivated people, four in the quality control department.

Our production covers bevel gears, sprockets, spur and helical gears, worm gears, pinion gears, multiple spines, shafts with toothing and profiled shafts.
With our internal technology or means our subsuppliers we are able to deliver the product complete with:

- Turning operations
- Gear Cutting
- Shaving
- Heat treatments
- Grinding
- Broaching
- Additional CNC machining

Tecnoingranaggi produces mechanical gearing for many different applications and specializes in the production of small and medium-sized lots even when they are ordered Just In Time. Tecnoingranaggi can offer a wide range of finished products from small gears to trains of cogwheels. We provide makers of tools, presses, gearboxes, flexography machines, agricultural machines and earth-moving machines with some of the parts they need.

Tecnoingranaggi works as a subcontractor carrying out some specific operations on behalf of other companies and produce complete products as per drawing.We are always in a postion to meet the customers needs and requests giving them the quality, price and delivery time they need. Tecnoingranaggi technical staff is knowlegable, dynamic and capable of offering not only products but also technical advice and service.

Our competitive advantages are delivery speed, flexibility and continous improvement according the Lean Production principles.

The comapny TECNOMEC of GIUDICI S.R.L. was born in 1996 from the experience gained by the owner, Giovanni Giudici, at an important workshop in the valley.

The company carries out mechanical work with third parties, creating mechanical parts based on the customer's design.
We specialize in the processing of die-castings, castings and printed materials of various materials such as:

light alloys
gray and spheroidal cast iron
carbon steels
stainless steels

furthermore, the company has its own machinery capable of producing turned and milled parts of any other material (special steel, bronze, copper, brass and even plastic materials).

The company covers an area of about 1400 square meters, is equipped with a metrology room with a three-dimensional measuring machine to ensure maximum accuracy and control of the work performed.

In order to satisfy customers, a space of approximately 200 square meters was assigned to the assembly of mechanical units, the components are partly produced by the company and partly purchased on the market by certified suppliers.

To date, the company has about fifteen employees.

TECNOPLAST is a specialist in plastic processing since more than 40 years. Our company has 60 employees and 32 injection moulding machines, mouldmaking and assembling.

FOR THE ONE IT’S PLASTIC.
FOR US IT’S POLYMER ART.

We at TECNOPLAST live for the fascination of plastic. Its versatility inspires us time and again to new ideas in the machining and processing of engineering plastics. And in so doing, we create new fields of application every day for the polymer art that has conquered the world. That’s what makes our work so exciting.

CORE COMPETENCIES

Real experts focus on their strengths – and so do we! Our core competencies are metal injection moulding (MIM), hybrid products, reinforced plastics and thermoplastic elastomers. Through this specialisation, we can constantly further our know-how and thus become even better.

Tecnoscalve srl was established in 1985 in Schilpario (Bergamo Region), northern Italy. Since then, the company presents itself on the market as supplier of turned and milled parts, for all industrial sectors which require high precision, quality, service and many years of experience.
Highly qualified and experienced employees work together on a production area of approx. 2.500 sq. mt. and enable the company today to produce various mechanical milling and turning parts according to the customer's drawing; Tecnoscalve is specialized in the production of small / medium series as well as individual parts and unique items.

Tecnoscalve offers its customers a complete service, from material procurement to assembly of the whole welded metal structure, from mechanical milling and turning up to the final inspection, quality control and final assembly.
If required, heat, surface and paint treatments are carried out by external partner companies so that the end customer is able to receive from a single supplier the mechanichal parts ready for its internal final assembly.

Tecnoscalve manufactures und supplies mechanical turned and milled parts for different industrial sectors, mainly machine tools manufacturers, woodworking machines, special machines for cable constructions, food processing machines and packaging machines, mechanical components for textile and printing machines.