Our recipe for success is quite simple:
Satisfied and loyal customers the highest quality and optimum service.



We are from AZ for you. From the creative product design to on-time delivery
fully applies: You can rely on us.



The company Wilhelm Löbke Federn GmbH has evolved into a modern, future-oriented operation with spacious, expandable production areas since 1935.

In September 2006, the company Wilhelm Löbke Federn GmbH has been reviewed by the South Westphalian Chamber of Commerce and Industry and has been awarded a recognized training company.

The Wilhelm Schröder GmbH offers metal and plastic processing from a single source. Especially in the manufacture of metal-plastic connections, this has great advantages, since the always necessary reconciliations are performed over a short distance.

The subsidiary, the average + Form GmbH & Co. KG develops, designs and builds stamping and progressive dies and injection molds for thermoplastics. Punching tools are available in sizes up to 1,000 mm segment length and 500 mm width, injection molds up to a size of 450 x 700 mm. As a specialty section provides + form to the production of tools and molds for the production of metal-plastic composite parts. Finally adopted on wire and sinker EDM machines as well as on lathes and milling machines there in the presence of spare capacity wage jobs.

We are a steel trading in the field of sheet metal, it also blanks and strip steel trade, (gap band) and 16Mo3 profile steel trade.

Severt the company was founded in 1964 as
Rotary milling. In the sixties, the company was founded
Vredener area and beyond as a manufacturer of
known location made oil tanks.
With the oil crisis of the early seventies declined
Demand for heating oil tank so that a reorientation
had to take place. The company became the Severt
qualified welding company, the
Contract manufacturing orders for the general machinery and
Steel construction and in particular for carrying out the mining area. The
Workpieces for the mining sector, which up in a series of 20
200 pieces are produced, reach a weight of up to 15
tons. They are by our clients as components for
large coal mining installations. The end customers are
Mining operations throughout the world, particularly in the U.S.,
Australia, China, etc.
In addition, customized or edited to weld components
for heavy-duty vehicles as well the plant.
In the field of manufacturing of small parts are on robot systems
Components for the automotive industry (Audi / VW, Ford, Mercedes,
Opel) welded.

For his own welding company developed the
Company since the seventies Rotary Welding and
Turnover positioner, which is also in the contract manufacturing customers successfully
could be marketed. By positioner handling
the heavy, bulky workpieces significantly facilitated, which
next working time savings also reduce the risk of accidents with
brings out. The high demand has led to very fast
a broad, partially protected by patents
Range and special solutions for
Manual, automatic and robotic welding, and for other
Areas of application.
Our workpiece positioners and welding equipment
with up to 50 tons. Capacity are to customers in Europe, China, India,
Thailand, Egypt etc.been delivered.
For over 20 years, the company is also Severt
Robot system with extensive experience in the
Manufacturing automation.
We provide complete robotic workstations (all from
one hand) which, alongside robots and positioners also
Welding and flame-cutting equipment including the
Safety technology includes. It is the customer-oriented
individual problem solving of complex welding tasks
priority.
Besides a robot Demo Center and Departments of
Construction and electrical engineering we can with a service team
experienced technicians to fall back.
Currently, about 400 workers at the company
Severt, of whom 30 employees. Sales in 2007
amounted to EUR 50 million.

In view of the growing Eastern European markets
and the even more favorable wage situation in 1997 in Poland
own production set up.The location in the southeast of Poland,
near the border with Slovakia and Ukraine, gives us the
Opportunity for good reliable staff
recourse which the traditionally good contacts with
eastern states have.
Due to the extensive know-how in the
Welding technology and the Company has the flexibility
Severt company now has a solid reputation in your
Business partners. This also shows the good response of customers in
Robotics systems and Workpiece. This is
for us a good basis for more activities
on the common European market.

The company Wilhelmshaven steel trade and Cutting Service GmbH (WSZ GmbH) has emerged from the operation Wenger and Neuhaus OHG, of the 01 April was founded in 1986. The former founder and Jürgen Wenger Werner Neuhaus are still shareholders of the company and are crucial for the career of the company.

On 01 July 2000, the establishment of the Rare Disease GmbH and 01 was October 2000, the move to the Emsstraße 29 in Wilhelmshaven. The company manufactures WSZ on the latest CNC controlled machines for the metal working industry. The company currently has 18 employees.

To meet the customers requirements over the years, the machinery is constantly expanding gerechtzuwerden. The original area of the Autogenbrennschneidens followed laser cutting machines and a water-jet system. Its latest acquisition in the machinery of Rare Disease GmbH is a sand blasting machine.

The PC equipment with the latest software ensures that the customer's specifications whether it be drawings, patterns, templates, sketches, files to almost all common formats (.dxf,. dwg) or even just ideas in CNC control commands can be implemented

The flexibility of the company based on modern equipment and qualified personnel.

We are certified by TUV Nord for the proper re-stamping of materials and products for pressure equipment in accordance with the Pressure Equipment Directive (97/23/EC) and the AD 2000 regulations (5106-W 3:04, version 04.2004).

Regionally, we serve every day Wilhelmshaven, Friesland, Oldenburg and Bremen (2xwöchentlich).

In our laser systems We will laser engrave for you on a size of max. 2500 mm x 16000 mm to a thickness of 15 mm. Of course, other formats are possible. We cut small (1000 mm x 2000 mm), medium (1250 mm x 2500 mm), large (1500 mm x 3000 mm), maximum (2000 mm x 4000 mm) and large formats (up to 2500 mm x 16000 mm ). We will laser engrave up to 15 mm mild steel, stainless steel and aluminum up to 12 mm to 6 mm.

For the weld preparation, we have a laser system with bevel head! Possible are I, V & Y chamfers.

With the aid of the oxy-fuel flame cutting, we can produce cost-cuts of 5 mm to 200 mm.

Plasma blanks we provide with high precision and low cost even in small quantities individually for you here.

With our continuous blasting machine we are able Profilstahlkonsruktionen, plates and other components of 1500mm width and 600mm height to shine.

In addition, we offer a 1-hour express service * for blanks.





* If material in stock!

The company STOLLE GmbH is a run for over 110 years family business with a long tradition as a machine factory and iron foundry. The history of the company founded in 1898, is an exact replica of the German economy in the last century, marked by setbacks, by the time after the world wars and economic crises, but also by the determination and energy, the company and the products in quality and supply capacity continuously develop.



So today is one of the company STOLLE the market leaders in the production of cast iron plates in Europe.



These cast plates are predominantly throughout the automotive, machine tool, aircraft, railway and industrial measuring their area of application.



The STOLLE product range is now on four pillars: the platens, test bench panels, measuring and marking plates, angles, and all types of special structures made from cast iron.



Casting and machining from a single source.The company STOLLE understood in both areas as absolute specialist.



New melting and molding processes permit the production of a stress-relieved cast iron.



New CNC controlled machining centers, coupled with our know-how, today enable whole new dimension accuracy.



These surfaces can be made more visually appealing due to new technology tool, which is just asking for example in design centers.



In addition, the company STOLLE has developed more and more into a system supplier in recent years. Planning, design, implementation, internal and external installations worldwide are a regular part of the delivery scope of STOLLE company.



Approx. 30 machines of various types and sizes are part of the machinery to meet all customer requirements can, and to achieve a maximum production depth. Please click on the images to sift through a few examples.

We manufacture multi-spindle and spindle machines, and CNC lathes precision turned parts up to a diameter of 65mm. We handle round, square and hexagonal materials of metal and Kundststoff.



We also do additional work such as:



Polygonal
Boring
Mill
External cylindrical grinding
Assembly of smaller components


We also produce pre-finished turned parts / assemblies, by letting perform certain production activities of foreign companies such as heat and surface treatments and monitor.

The Wilh company has been manufacturing since 1939. With 40 employees today, Wernecke successfully fasteners as well as turned and milled parts (according to DIN, sample or drawing) for important companies in the automotive and agricultural machinery manufacturing as well as in the mechanical, motor and electrical industries in Germany and abroad.

Wilh. Wernecke does not see itself as a mere supplier, but wants to be a reliable, flexible and imaginative partner with a high level of know-how for its customers.

Modern factory equipment, continuous improvement of operating processes, close cooperation with our customers, a certified quality management system in accordance with DIN EN ISO 9001 and CAQ-guided quality control make us a strong partner in international competition.

Small and large series, individual parts or assembly parts are part of our range.



Wernecke is one of the largest manufacturers of fork heads, fork joints, turned and milled parts and supplies well-known customers worldwide in the automotive, mechanical engineering, electrical engineering, hydraulics, medical technology, brake technology and agricultural engineering sectors, as well as the wholesale of fastening technology. All customers appreciate the perfect process in planning, manufacturing, quality and shipping our products.
Our modern machinery includes the latest CNC lathes with powered tools and finishing machines for all machinable manufacturing processes.

We produce small, medium and large series. The range of services is as follows:

Outer diameter: 8 - 65 mm from the rod
65 - 120 mm as insert
Outside square: vkt. 8 - vkt. 55
Turning length: up to 200 mm
Production batches: up to 1,000,000 pieces

We process free cutting steels, input and tempered steels, ETG steels, and stainless steels. If you have any special material requirements, please contact us.

For years, we have been working with innovative companies in the surface and heat treatment industry, which produce in accordance with strict quality and environmental standards. We are able to meet our customers' demands for the latest treatment methods at any time.
We have been committed to high quality standards for years. A CAQ system implemented according to the latest standards and the met requirements of ISO 9001 guarantee flawlessly produced products. QM tools such as VDA/ QS 9000 sampling, FMEA and 8D report, zero-error strategy, requirements and customer requests for packaging, shipping and logistics, as well as KANBAN deliveries are no problem for us.
Helping customers with application issues.