We are still a young and innovative team.

Service is our number one priority. In a conversation we will be happy to advise you in terms of cutting techniques and materials.

Whether single piece or series, we cut each part for our customers as quickly as possible.

We cut to ultra-modern 3D cutting machines with a max. Pressure of 4150 bar.

Delivery, we agree with each customer from individual, to ensure a smooth process.

YOU ARE WITH U.S. AT THE CENTRE

We advise you individually to choose the best Cut type and find the most economical solution.

Your requirements are our policy. As is true of the appointment and the quality. It is not enough for us to fulfill your order only, but we want to exceed your expectations.

Visit us and let us show the operation. AQUACUT24 is in Hemau in Commercial Ring Ost. Directly on the B8 between Regensburg and Neumarkt

Our innovation is in the optimum use of Tools. We are constantly looking for you for creative, cost-saving and process-optimized solutions.

Competent and individual advice, high-quality and timely services and maximum flexibility at a fair price - that's the sound basis for good cooperation.

Together with our reliable shipping partners, we offer prompt and careful delivery service.

As a responsible company, we fulfill our environmental obligations. Waste and by-products are disposed of properly.
Particularly well, the water jet technique suitable for producing molded parts from all types of metal (ferrous and light metals, steel and stainless steel).

When processing very fine kerf arise with little loss of material. In the cutting process no heat, so no change in structure or hardening occurs in the cutting area.


Especially, oxide-free and virtually burr-free cut edges without deformations in the cutting area is the enormous advantage of water jet technology.

Aquacut24 takes care of:

* Material procurement and supply of cut parts
* Prototypes and one-off production to large series.
* Complete solution from design / construction to the finished part / product.

CUTTING TYPES

Is in the water jet technique differentiates two types of
Cutting techniques.

Purwassertechnik and Abrasivschneidetechnik

Pure Water

When Purwassertechnik to cut the material solely water is being used. With the Purwasserstrahl can be cut perfectly softer materials. Such as plastics, rubber, wood, various composites

Abrasive

Due to the 3-fold sound velocity of the water jet einUnterdruck generated in abrasive cutting, the cutting into it sucks the sand into the mixing chamber. By focusing tube of sintered metal, the mixture of water and sand jet is brought into line again and cuts up to 250 mm aluminum or steel up to 150 mm.

WHEN WE CUT FROM GOOD!

Water jet cutting industry meets

In principle, rectangles, circles, ellipses, curved paths (eg, holes, flanges, cutouts, perforated sheets, letters, pipe cuttings, etc.) are produced each geometry of flat and slightly curved surfaces so. The maximum cutting accuracy of our method is:

Accuracies:

+ / - 0.1 mm

Water is forced under a pressure of about 4000 bar through a nozzle of 0.2 mm. The water admixed abrasive ensures a "grinding out" the kerf of 1 mm or less. This Mikrozerspanungsprozess hardest materials to be cut.

A CNC controlled water jet cutting machine enables cutting of any form of flat plates.

Water jet cutting meets craftsmanship

With the water jet, almost all materials from aluminum, stainless steel, porcelain tile, ceramic tile, granite, copper, brass, titanium, steel, stone, and non-ferrous metal, glass, ceramic, plastic and composite materials to natural materials such as wood, cork, and Edit rubber without problems.

The water jet can simultaneously edit multiple layers of materials.

- No deformation due to delay in heating
- No burn-off at the cut edges
- No hardening in the kerf by temperature
- No tempering colors on steel
- Clean cut edges with aluminum, brass, copper, etc.
- The finest contours with extremely thin bars (tool width 0.8 mm)
- Very true to size, so no rework required
- Economical even for single parts and small series

Founded in 1988 as an integration mode with 8 employees, now 300 people working in different areas.

The company was born from the idea to people who are disadvantaged for a variety of reasons, to establish a working and meeting place, and thus to create a piece equal opportunities.

Since then, here find the mentally ill and people with other handicaps a job, a social life and daily structure.
The intensive social support at the workplace and individual assistance in all situations provide for employees important stabilizing factors in everyday life dar

We are able to metals, non-ferrous metals, light metals such as aluminum and aluminum alloys and non-ferrous metals such as brass and bronze, as well as the most common plastics such as PA, PE, POM, edit.

We offer our employees individual machining operations such as turning (facing, plain turning, threading) and milling (2-d, 2 ½ d, 3-d, slot milling, drilling, thread cutting, rotary milling, circular milling, Bags milling, reflect) according to customer specifications the individual, - to part series on modern CNC machines.

In the electric field assemble (tin, crimping, strike) we single wires, cables, multicore cables, control cables, control cables.

Also the loading, Installation, assembling and soldering of printed circuit boards, printed circuit boards, controllers, control units, control panels, control units and cabinets and Electromechanical assembly belongs to our Leistugsumfang.

In addition to the cutting and the electric field, we offer in our general area activities such as check, commission, assemble together, gather, build and assemble all kinds of orders with and without purchase, with or without storage at.

Welding and shrinking of CDs, books or other items, we can easily perform with our half-hose-wrapping machine for them. Rounding out this area is through installation work, deburring, repackaging and sorting work of individual parts, small series up to series medium Auflagenlosgröße.

Do they need offset printing, digital printing, transfer printing in color or black and white?
Then let them but their office equipment, letterhead, business cards, brochures, flyers, books, greeting cards or print copies from our staff, bind,
or fold.
You need help with set design, desktop publishing (DTP)? Our employees are fast for them, individually and creative.

Our distribution is not only advisory, solution-oriented, personalized, accurate, helpful and customer oriented with troubleshooting, but also fast, flexible, competent and efficient for inquiries.

Take advantage of the benefits of a modern and social integration operation.

Founded in 1998, ARCARM S.R.L. is a manufacturer of technical rubber parts for various industries. The company is specialized on hydraulic rubber seals for the automotive and construction industry, but recently has expanded into almost every industry in need of rubber molded components. Certified rubber compounds (NR, NBR, EPDM, Silicone, FKM, CR, etc.) from different manufacturers are used in the parts production process. Being a member of IMDS since 2019, we value the quality of our products.