Find specialized suppliers for pad printing on Techpilot. Our platform offers access to suppliers who use this printing technique to achieve precise and high-quality prints. Use the e-sourcing process to find the best suppliers and optimize your procurement costs.
Founded
Employees
Certifications
Föritztal OT Heinersdorf
Germany - 96524
The ProContur is successful on the market for 20 years, providing products for the electronics, display construction, medicine, engineering, automotive industry and others. By combining sheet metal and plastic products, an effective production process is guaranteed to position the company for years to come vis-competitive.
Consulting and production from one source, enables a flexible production depth of small and medium series to the highest level of quality. It does not matter if products from sheet metal or plastic are being requested. Of interest is the combination of both raw materials for innovative products, because that allows for flexibility from a single source.
Translation by Google Translate
Founded
1994
Employees
50 - 100
Certifications
Wittlich
Germany - 54516
Everyone knows the problem of corrosion, it is shown to cause damage amounting to about 3% of the annual gross national product. Particularly common is the corrosion of threaded fasteners.
The screw is probably among the most important inventions of mankind. To protect you, is a real challenge.
Bolted connections are found in all areas of daily life. As long as they work, we're not thinking about them. Must rusted screws on supply systems or other vital parts solved but, most of the trouble starts. In time-consuming and cost-intensive work, they are solved, sawed or drilled out and must then be replaced.
Even the well-intentioned protective coating does not solve the problems. At the latest after the second coat of paint, the threads are added and a release is impossible. A coat of paint can not protect against aggressive media, because the coatings are designed in most cases for such loads, and often do not reach the threaded base.
Remedy can only offer bolted from high quality stainless steel screws or caps here. Since stainless bolts and nuts are very expensive and can not be used anywhere (risk of electrolytic corrosion when connecting materials of different weights!), Screw caps are in most cases the cheaper solution. They protect the important screw from corrosion and environmental influences. Thereby increasing the life of the glands and thus reduce the cost of maintenance.
Screws, nuts and accessories are largely internationally standardized, the resulting compounds are designed screws but as diverse as the art itself, and experience has shown to not alone be protected by a single "universal" cap shape.
The company RADOLID Thiel GmbH offers here different systems and a broad program to address these problems.
RADOLID caps have a round cross section, a clamping edge, thread ridges or wedges, a sealing lip and a groove.Only a combination of these essential RADOLID features together form the prerequisite for optimal function. Since there are these caps not only in different sealing lip designs, but also in various heights, this cap system has grown almost all claims.
Founded
1962
Employees
Certifications
Lüdenscheid
Germany - 58509
Plastic process engineering and tooling, development-construction-Hertstellung of precise technical plastic parts and complex assemblies. Own tool mainly used for plastic injection molding process. Complete solutions from one source. More than 30 injection molding machines with clamping forces from 120 to 8000kN. Competent consulting, Modern CAD and CIM systems shall conduct short implementation times and meet the highest demands of our customers. Also new (MIM) Metal powder injection molding.
High expertise in project management and implementation of plastics solutions for the medical industry. Our long-standing clients include global corporations but also local SME'S.
Founded
1971
Employees
20 - 50
Certifications
Kaiseraugst
Switzerland - 4303
Would you like to know which suppliers are ideally suited to your requirements?
Register now and submit your request.
The Center for Laser Welding, grains and engravings in the Stuttgart area.
The Reichle GmbH has more than 35 years the competent partner for modern laser welding technology, laser texturing, Narbungen- / repairs and precise engravings for Stuttgart, in Germany and throughout Europe. Moreover, our company also in the fields of surface technology and labels on unique services.
Founded
1981
Employees
50 - 100
Certifications
Bissingen/Teck
Germany - 73266
With around 30 injection molding machines ranging between 40-200 tons of feed, rekuplast GmbH is the perfect partner for manufacturing components with an injection weight of 0.05 to 500 grams.
Our machinery consists primarily of Arburg and Demag Sumitomo machines. This puts us in an excellent position in terms of accuracy and reliability. This is also reflected in our permanently statistically monitored machine and process capabilities.
In our injection molding production, we produce quantities of 100 to 40,000,000 pieces per year for individual parts. In higher quantities, the processes are fully automated, depending on the complexity of the component.
To ensure perfect series quality, every component is produced with the suitably configured machine. The feed and screw ratio are optimally tailored to the component — without compromise! Compliance with specified process parameters is a matter of course.
Our organization is structured in accordance with the 5S philosophy in terms of order and cleanliness. In doing so, we attach great importance to a targeted material flow and use a portal conveyor for this purpose, which connects production with storage and shipping. This ensures FIFO and batch traceability, from raw material to delivered component.
Founded
1969
Employees
50 - 100
Certifications
Wertheim
Germany - 97877
We develop and manufacture technical plastic parts in a sophisticated design and the highest precision for all industries. Customer orientation, service and quality are our hallmark. Innovative solutions for technically demanding tasks, from concept to series production, the focus of our work. Our focus lies in the realization of economically optimal solutions for you. In partnership develop innovations that bring real value to you. Through our range of services you need from design to the finished series product only one partner for all questions relating to the plastic.
Precision injection molding, multi-component injection molding (2K and 3K), thermoplastic foam (TSF), filter technology, gears, and Insert-/Outsert-Technik and Verabreitung of high-performance plastics form the basis of our production technologies. Your demanding components we manufacture injection molding machines with clamping forces from 150 kN to 5000 kN and shot weights from 0.3 g to 2,000 g, the required injection molds are manufactured in our in-house mold or also with international partners.
The surfaces of your articles we finish by painting, printing, EMC coatings and decorative metal coatings. For joining components we use welding and bonding techniques. We are happy to install your assemblies or complete products and pack them after function testing in retail packaging.
Founded
1968
Employees
20 - 50
Certifications
Wolfwil
Switzerland - 4628
Created in 1988, Ripleg S.A.U. is a company dedicated to engineering, ironing automation, creation of electric wiring and group assembly that adapts to a great variety of industrial sectors.
With facilities of 7,000 m2, Ripleg S.A.U. offers an integral personalized service that includes design with CATIA V5 to sheet metal working,bended and welded parts, the creation of electric wiring according to the needs of the costumer and mechatronic assemblies.
Implemented with the most advanced technology, guaranteeing the best quality and optimum service.
Ripleg offers the following services:
- Design and engineering with CATIA V5. We have 6 work stations.
- Trumf Laser sheet metal cutting
- Trumf Punching sheet metal cutting.
- Trumpf Bending machines. Two automatic bending stations and three manual stations.
- Two welding robots. MIG/MAG and TIG.
- Six manual welding stations.TIG and MIG/MAG
- Spot welding.
- Nut welding.
- Sheet metal finishings: powder coating, liquid painting, zinc plating, polishing,...
- Wiring assemblies. We process wires and cables with automatic Komax machine.
- Three cutting stations, Inkjet marking, Thermo marking.
- Harness assemblies and finished electric boxes assemblies.
- Mecatronic finished assemblies. We offer 2000 m² for all kind of finished assemblies.
Founded
1988
Employees
50 - 100
Certifications
Ripoll
Spain - 17500
The owner-managed company Robert Schulz has been successful for 120 years in the sheet metal processing works. This experience we use to continually improve our performance. The long-standing collaboration with
major companies in the electronics and information technology and precision mechanics and optics has us as a specialized
th and reliable supplier coined.
Our manufacturing experience, we provide our customers already in the design process are available. To be
develops optimal solutions, which have a favorable effect on product costs.
Founded
1892
Employees
50 - 100
Certifications
Merkendorf
Germany - 91732
ForgingCastingSolutions - We bring your construction into shape!
You have the drawing and we have the right foundry or blacksmith.
We procure your parts for you internationally at good conditions as requested and deliver them to your warehouse on time. These can be raw parts or machined parts. Also electroplated or hot-dip galvanized or painted.
Do you need detailed advice on the choice of materials, design or implementation of existing welded and milled constructions for new cast or forged parts? Then you are right with us.
Would you like to have all parts of an assembly fully assembled? No problem either.
We take care of the quality, the right packaging for sea or air transport, customs clearance and then deliver the goods to the desired delivery location. Also with special packaging requests such as printed cardboard boxes or the like.
With our experience for more than 10 years, we try to make everything possible, please contact us.
Founded
2005
Employees
< 5
Certifications
Bremen
Germany - 28307
Rosco Eko-Tech Sp. z o.o. is an engineering company established on the European market in 2009 as an independent subsidiary of an enterprise operating mostly on the German market, i.e. Rosco Polska Sp. z o. o. since 1994. The main direction of our operations is comprehensive services in the field of supply and installation of steel devices and structures. From the outset of our operation, we work for European customers offering them the best Polish performance verified by the experience of many years. We products of the highest quality acquiring the trust of customers. We especially try to assist with the optimisation of technological processes and implementation of environmental protection solutions.
Founded
2009
Employees
20 - 50
Certifications
Krakau
Poland - 30-389
Founded
2012
Employees
< 5
Certifications
Großenlüder
Germany - 36137
Founded
Employees
< 5
Certifications
Dobel
Germany - 75335
Founded
2019
Employees
100 - 200
Certifications
Grünhain - Beierfeld
Germany - 08344
The company RWGrass GmbH is in the range of CNC precision turned and milled parts and finishing of cast and sintered parts at home.
Our products are manufactured in various materials and various sizes from small to large series.
Our flexibility refers not only to batch sizes from 500 to 100,000 pieces - the adaptation to customer requirements using CAD are appreciated by our partners.
The manufacture and assembly of precision mechanical devices and modules is our specialty. Presses, punching, squeezing, riveting, drilling, threading, screw, solder, tin, merge, shapes, spot welding, grinding, milling, turning, adjust, measure and test the purchase of integrated operations.
The house tool makes us independent and allows for maximum on-time delivery. So workflows are optimized and customer requirements into account even better.
Products:
We manufacture turned parts:
- Diameter from 8mm to 650mm
- Length up to 200mm
Milled parts:
- Length up to max.800mm
Materials:
Stainless steel (eg 1.4301, 1.4404,), steel, brass, copper, aluminum, plastics
Delivery program:
Pump body housing, valve body, piston, adapters, bearing chock, collets, bushings, grips, power tap, shielding, solder lugs, optics carrier photodiode holder, spacer sleeve, stop in connector, female, fiber filters, sleeve, guide pin twist mechanism, driver twist mechanism, thumbwheel mechanics, different door- window buttons, different door window handles, press rings with slope, reference upper part, orientation completely, burner housing, hollow shafts, bolts, lever cylinder housing, shaft for drive motor, cap for drive motor, ball valve, sleeve, guide shaft, stop bar, assembly photographic technique, component assembly Motor snowmaking equipment , component assembly for medical and measuring equipment of human blood analysis;
Founded
Employees
10 - 20
Certifications
Vahrn
Italy - 39040
Would you like to know which suppliers are ideally suited to your requirements?
Register now and submit your request.
With a wide range production equipment, Sadev Group is able to quickly meet your requirements in small, medium and large batches, in any material.
A one-stop supplier for precision turned components
One single partner to rationalise your purchasing
Service in LCC (China, Hong Kong, Eastern Europe…)
Worldwide delivery covering all industrial sectors
Controls & Quality Assurance (ISO 9001, AMDEC & PPAP process …)
Founded
1938
Employees
10 - 20
Certifications
Seynod
France - 74600
Welcome to the company Berg.
For more than 50 years, Berg has been developing and operating printing processes around the label (marking identification), with constant adaptability to new products.
Based in Lunéville, our company specializes in the manufacture and printing of adhesive labels in rolls, from the very small to the very large series.
We manufacture our products for SMEs and SMIs from all sectors of activity (viticultural, spirits, cosmetics, petrochemicals, textile, food industry).
A team of graphic designers creates and formats your future labels according to your desires and constraints. They adapt them to all formats in the best possible definition.
In addition, they recompose, retouch your photos and visuals.
They advise you and bring you graphic solutions to give more readability to your labels.
We are at your disposal
Founded
1984
Employees
10 - 20
Certifications
LUNEVILLE
France - 54300
Who we are ?
Young and very determinated CNC Machining Workshop
Something needs to motivate a person for that person to give the best in what they do. How we do that? We believe in our passion. We’re all passionate about Machining and engineering, that`s why you will see some unique products, we spent thousands of hours studying parts and trying to improve every time.
First of all we stand for quality, that`s why we decided to buy our own CNC Machines and to develop the Machining center in Romania, From design to final product we have all the solutions
CAD Service , Product Design in SolidWorks
CAM Programing in SolidCam
3 and 5 Axis Machining
Private Labeling
Laser Engraving on Aluminium , Steel , Stainless Steel, Wood, Plastic
Packing and Branding your parts in house
Fast Shipping from our Romanian warehouse
.
Machines :
DMG Mori CMX50U 2020 X 2 Pieces
DMG Mori CMX50U 2023 x 1 Pieces
50W - Laser Engraving
Automatic Skin Packing Machine
Software : SolidWorks / SolidCam 2023
Founded
2019
Employees
5 - 10
Certifications
Alba Iulia
Romania - 510185
Laser engraving and milling
Founded
1983
Employees
< 5
Certifications
Remshalden
Germany - 73630
Schneider Kunststofftechnik is a company equipped with the very latest machinery, currently employing 15 people. Our range of products includes finished injection-moulded parts which are exported throughout the world. We manufacture technical precision parts up to 430cm³ weight (thermoplastics and thermoset materials and elastomer). SK Schneider also offers die and mould making.
The processing of thermoplastics and thermoset materials is yet another field of activity. Our performance profile:
- Ultrasonic welding
- Printing
- Assembly of finished parts
Our production plant covers an area of 2,400 m². State-of-the-art technology. Our highly motivated workers assure you fast delivery, superb quality and low prices.
We can offer you ready-made products in our company-owned online-shop (www.sk-tech.de >> Products). Also you will find product informations ready for downloading below - as follows:
Tube clips
Tube plugs
Olive pivot plugs
Thread protectors
Protective caps
Universal stoppers
Ribbed pivot plugs
Plastic packaging
Technical components
Founded
1993
Employees
10 - 20
Certifications
Kirchheim i.Schw.
Germany - 87757
Find the ideal supplier in just 1 minute
Communicate directly with buyers
Unique market price comparison to realize the best prices
Existing processes, systems and suppliers can be easily integrated.
Buyers use the platform completely free of charge
