Production specialist in advanced automation and manufacturing specialist in complex machine parts and tools. Based on our experience, we offer particularly efficient systems for rubber processing as well as non-wovens and other web products and this is always along the entire value chain. Furthermore awetis is specialist in QPDC/BDE.

Speed, reliability, flexibility and constant focus on the needs of customers is the success strategy of the company Barku Plastics Technology GmbH & Co. KG.



1977, our company was a subsidiary of the company LUBING Maschinenfabrik GmbH & Co. KG
Founded in Barnstorf. The company LUBING since 1949 Watering Systems has been producing for the animal agriculture industry.



Purpose of establishing the company Barku was to produce all required by the company LUBING plastic parts. These were mainly in the food sector (water drip trays, food bowls,
Potions PVC pipes, etc.) are used. Other areas were quickly opened in the plastics sector, today covering a large part of our product range.
The company Barku plastics technology has grown continuously and now employs 75 highly qualified employees.



The application of new technologies such as co-extrusion or 2-component injection molding is for us as self-
understood as the importance of high quality, which is executed with us according to the guidelines of ISO 9000.

We as, BB Engineering Solutions, provide engineering services with high quality standards for the investors and the company owners particularly from automotive, medical, defense and marine industry willing to benefit from the profitable investment and production environment of the region.

Our suppliers that we have been in collaboration with, offers wide spectrum of engineering solutions including;

· Production of stamping parts (including fine blanking parts), design and production of stamping dies (progressive stamping dies in particular)

· Heat treatment and coating processes

· Production of plastic and rubber parts, design and production of injection-compression moulds

· Production of casting parts, design and production of casting molds

· Production of forged parts, design and production of forging dies (both for hot and cold forging)

· Production of turned parts, design and production of connection fixtures

· Production of prototypes

· Design and production of control fixtures, production tools

· Design and production of welding fixtures

· Design and production of welding machines

· Design and production of assembly lines

· Design and production of special purposed machines (roll forming, sheet metal cutting and forming, plasma cutting, custom designed cutting and punching machines)

· All kind of testing analyses indicated in customer’s specifications which are required for the validation process of the product

· CAE analyses studies (stress analysis, MES simulation, kinematic analysis, FEA analysis, process optimization studies)

· Quotation and cost analysis

· Resident engineering operations

Having finished the manufacturing phase, the logistic and validation services involving 3d measurement and PPAP presentation are also performed.

As well as industrial projects, we are providing joint venture and consulting services for those who are wishing to invest in automotive and medical industry.

Our production includes the following technologies:
- Mono-and twin-sheet - vacuum thermoforming
- Welding of plastic components by means of heating element and ultrasonic
- PUR foams of rigid foams, integral skin foams and foams hollow body
- Milling of plastic parts from sheets, profiles and molded parts according to customer requirements
- Installation and testing of electrical assembly of mobile transport units

CAFAC - RUBBER PRODUCTS AND SYSTEMS FOR THE RAIL INDUSTRY
Cafac studies and provides rubber products and systems for equipment used in the transportation of passengers, goods, freight and energy. Our core busines is the manufacture of fire resistant door belts and window gaskets. The railway sector is our primary market. Our products are installed in bogies, floors, interiors, seats, roofs and pantographs.

Cafac's history is built around satisfying a wide range of industrial needs. Since 1949 Cafac has introduced and extended all of its conventional rubber processes, including:

extrusion
welding
hose making
moulding
plastic rubber injection moulding (TPE)
polyurethane VULKOLLAN® casting
Each of our workshops manufactures rubber parts of varying sizes and densities that can be bound with steel, aluminium, or plastic. Cafac has conceived an "over-moulding system" which can wrap rubber around cable or insulate EPDM for use in medium and high voltage electrical plugs or special surge arrestors.

Cafac has a 7-strong development team, 5 of whom are engineers researching solutions tailored to customers' requirements. Our strength is both in the ability to provide all kinds of new rubber parts as well as in helping customers to reengineer existing parts - for example when metallic parts are replaced with thermo-formed or roto-molded parts to increase performance, reduce weight and operating costs. We have designed products as varied as finger protection systems, seat wedgings, roof and floor wedges and a selection of rubber carpets.

RUBBER PRODUCTS
We offer a wide range of rubber products that meet flame-retardant standards in the USA, France, UK, Germany, Poland, other European countries and Asia.

After a two-year development program, Cafac has produced the 742 T, a halogen free, non toxic, extrudable and vulcanizable rubber product using hot air. This new product is flame retardant for 20 minutes under 800°C and will keep its suppleness up to -40°C. A classical halogenated rubber is breakable -20°C

Our other rubber product, the 444 T, is also EPDM-based with silicone fire retardant qualities. These properties are particularly useful for the Trans European trains where outside temperatures fluctuate greatly.

Like its silicone rubber counterpart, Cafac's EPDM products meet all British Fire Regulatory Standards. However, whereas silicone rubber is incapable of withstanding the combined weight of passengers and luggage, our EPDM products (742 T and 444 T) offer high mechanical resistance, and are therefore a superior choice.

REFERENCES

Cafac today manufactures window gaskets and door sealings for the Virgin West Coast Main Line and cross-country trains using its 742 T and 444 T products. Alstom, Bombardier, Amtrac, Siemens, Adtranz, Fiat, Euroshuttle, Faiveley Transport, Westinghouse and SNCF also use our products. SNCF gave Cafac a number 14, AQF 2 certification, making us the first rubber manufacturer to be certified in France.

Cafac's rubbers are also used in shipbuilding, buses and lorries, travelling cranes, telepherics, specials cars, amusement parks and a wide range of other activities. Our vision is to be your first partner in jobs requiring rubber products and systems

The company - triple-easy


Carl Muller, is a company with three separate focal points and one goal: to provide our customers with ripe (mature) and comprehensive services.

What made the bold use of the opportunities is developed historically, today offers a variety of services, the elements of which our customers can use individually, but opened their unusual combination options:

Consultation, which begins in product development and design
Comprehensive services from design through to die versatile production
Comprehensive services to logistics partnership and "just-in-time" delivery of products and components
About 60 qualified and motivated employees work at the two locations Lüdenscheid and Altena for customers for the following industries:

Automotive, automotive and vehicle industry
Sanitary industry
Electrical engineering and lighting technology
Promotional Products
Furniture industry
Aviation
Sports and leisure industry
When may we be of service to you?

The Association Scalve MECCATRONIK comprises 10 companies, UNI ISO 9001:2000 certified, mechanics, engineering, electronics and electrical engineering operating in the fields for years.
Our company structure allows us to leverage a variety of internal interfaces from diverse expertise. This ensures efficient use of resources. From product design, construction and development of components to system integration and creation of integrated assemblies and complete solutions: Scalve Meccatronik dominated all aspects of project development to the last detail; this we offer not only high quality technical base units extensive customization options for individual requirements.
Thanks to the synergy of contract development we can now offer short delivery times, high product quality and optimum service in the position to offer our customers.
PRODUCTION:
MECHANICS
- Manufacture of individual parts to large-scale production;
- Turning, milling, drilling with CNC and traditional machines;
- Grinding, honing, lapping;
- Thermal and galvanic treatment;
- Manufacture of blades and saws.

ELECTRONICS AND ELECTRICAL ENGINEERING
Assembly of electronic components;
- Assembly of electronic cards;
- Assembly of electronic components;
- Cabling;
- LED lighting;
- Fabrication and installation of current transformers.

see for yourself