Engineering company with 65 employees in family ownership
- Modern Locksmith up to 20t with welding robots
- Large parts 5-axes simultaneously to 18.0 x 3.5 x 3.0 m / 60 to
- 3D measuring machine
- Painting and possibly assembly

- Modern and efficient production
- high flexibility
- high quality

SYS Pres company is metal fabrication company which spealizes in laser cutting, laser welding, welding, bending, and surface treatment operations. Surface treatments are automatic sand blasting, zinc plate, copper plate and etc. SYS Pres company's facility is 3000 sq. Our export countries are Austria, Germany, England, Netherlands, Belgium, Israel.

The TDF Steel Kft, a Hungarian-owned medium-sized business, is specialized in steel processing and
manufacturing of steel structures and components for construction machinery. Our facility is located
about 160 km from Budapest, easily accessible by motorway M5/M44.
Our work is founded on a very strong technological basis with many years of manufacturing experience.
Due to the continuous and successful marketing activities TDF Steel has established well operating
business relations to a number of customers from abroad. As a result we deliver 95% of our products to
the European export market.

We are proud to cooperate with some of the well-known machine building companies as CNHI/FIAT,
Günter Papenburg AG, Henschel Antriebstechnik, Neuson-Forest GmbH to name just a few.
Our main goal has been for the last two decades to meet the requirements of our business partners by
continuous technological development and improvement of the product quality. Our Quality
Management System is certified according to the MSZ EN ISO9001:2015 requirements.

Focusing on our outstanding manufacturing knowledge and skills, ongoing improving our quality
standards, TDF Steel is a reliable business partner and supplier for the machinery industry.
Our product range includes: welded constructions, machine frames, beams, arms, levers, dozer blades,
housings of cast manipulators, etc.

Our production performs following metal working procedures:
· shot/sand blasting
· flame/laser cutting of steel plates
· bending/rolling of sheets
· welding with protective gas both manually and robot controlled
· machining as turning, milling, grinding, boring
· surface painting applying ground and finish coat
Please refer to the additional information about our machine capacities below.
After the final quality control our products will be packaged appropriately and so are ready for the
shipment to the customer.
We trust TDF Steel can fulfil your expectations and soon become your reliable component supplier.

Please send us your enquiry and we will be happy to answer your request or give you additional
information.Metal sheet processing from 2 mm to 150 mm thickness
Thermal cutting process(laser, plasma and flame cutting)
Bending
Welding
Manufacturing
Painting
Assembling

As a medium-sized, family-run company, we have been manufacturing metal components and metal assemblies for over 25 years.
Our customers include well-known shop and object builders, and we also manufacture components for metal and mechanical engineering.
In cooperation with our customers and partners, long-term relationships are created that are based on mutual trust and technical understanding.
As a high-tech company, we take on all tasks for you, from design and production, whether hand sketches or 3D models, from prototype production to series production. We are at your side with all our experience and know-how in metal technology.

THE COMPANY

The company TEPRO Precision Technology GmbH has been producing for over 25 years and stands for quality, flexibility and versatility when it comes to the treatment and processing of steel, stainless steel, aluminum and other materials. Our customers appreciate the high quality of our work, our response times for product changes and general deliveries as well as the versatility of our range of services.


CUSTOMER TESTIMONIALS + PRESENCE

Consistent project organization and systematic way of working provide transparency and information value safe in every phase of a project.

The use of modern working methods and techniques as well as continuous professional development of all our employees is a matter of course for us. Despite high specialization we speak the language of our clients and project partners.


LASER CUTTING - PLATES

The technology of modern systems is becoming increasingly complex and places high demands on a comprehensive understanding of the system.

Solutions are needed that integrate components from complex manufacturing processes.

Our comprehensive understanding of the system we have provided in a variety of projects to demonstrate, with which the background experience and the professional profile of our employees share.

For the production of medium and large series, we have laser systems is synchronous two parts can be finished simultaneously. Also a wide variety of moldings can be edited on our machines.

In our warehouse continuously located our standard materials such as steel, stainless steel and aluminum in the form of plates and cold-rolled strip bars in various sizes and thicknesses.


LASER CUTTING - PIPES

Laser cutting of round and rectangular tubes as well as the process of various Profielen has always been an integral part of our vertical integration.
Our Bystronic laser system has an integrated rotary axis. With these conditions, we can deal with complex contours and various breakthroughs with only one setup.With rectangular tubes, it is possible to cut us contours of the corners.


MACHINING

Our extensive editing options and the powerful machinery create space for your disposition. In your planning, we are on your side and work rationalization potential for your products to strengthen your market position. We offer all the possibilities of mechanical processing and stand for reliability at the highest quality level:
- Drilling
- Deburring
- Tapping
- Vibratory Finishing
- Rub
- Roller straightening
- Lower

Working closely with qualified and capable partner companies we can offer through our range of production services in addition all mechanical and other fields.
- Turning
- Milling
- Glow
- Hardening
- Surface finishing
- Grinding
- Sand and glass bead blasting



BENDING

With our press brakes complex components are brought up to a partial length of 2100 mm in the form of 3-point bending technique.Our experienced staff guarantee the highest precision through continuous training. With this know-how, we also want to bring your products high-end in the form.


VERBINDUNGSTECHNIK

With our large vertical integration, we are able to add your demanding products from a single source and to weld. This range of welding processes are applied. Depending on the material, geometry, and application are available to us for this purpose the following procedures.
- Welding MIG-MAG
- TIG welding (including aluminum)
- Come up the ...

Our company owns a number of 5 production facilities in different areas of Romania, for metal processing. In addition to the only stainless steel pipe factory in Romania, we are also equipped with top equipment for metal processing such as: lasers, plasma cuttings, press brakes and pvd coating

For Tresoldi & Casiraghi, producing quality is more than a mission; it has always been a true passion.
Since 1962, the year the company was founded, this passion has been reflected in the production of carpentry, which over time has won recognition on the Italian and international markets. A way of working that marked the transition from the craft dimension to the industrial and technological dimension in order to ensure competitiveness and offer only the best at always competitive prices.

Progress has been made not only in terms of the number but also in terms of the security of internal processes and respect for the external environment. A success that is thanks to the daily commitment of a group of people who are able to look at the challenges of the future with the same enthusiasm as on the first day.

The company employs personnel who specialize in welding, bending, stamping and assembly.
The welding work is carried out by qualified personnel who have the following qualifications:
WIG — MIG — MAG — ELECTRODE.

We are also able to issue mechanical test certificates and non-destructive test certificates.

In 1877 the company was founded Uebele. Since then the company has grown steadily and today offers the complete program around the punching technique. We manufacture high sophisticated tools, high-precision fine blanked parts, stamping parts, bending parts, stamping and deep drawn parts and metal pressing parts. The assembly production and the production of small and large series are part of our extensive range of services.

For our national and international customers, we manufacture complex parts on the following presses:
- Deep drawing presses 400-4000 kN (table size up to: 2,000 x 1,300)
- Automatic punching 400-6300 kN (table size up to: 3,000 x 1,500),
- Fine blanking presses from 1,600 kN to 3,200 kN,
- Pressing machine to Dm 900 x 5 mm
- Press brakes up to 1,500 mm long

Materials / Materials:
Steel, stainless steel (1.4301 / 1.4571 / 4310, etc.) and non-ferrous metals
such as aluminum, copper, bronze and brass, and substance capable plastics.
Sheet thickness: 0.05 mm - 10.0 mm
Coil: 300 mm x 10 mm and 1000 mm x 8 mm

Product Line / products:
Fastening systems for photovoltaic systems such as roof hooks, shielding,
Cell connectors, mugs, fittings, spacers, flanges, housings, holders, sleeves,
Contacts, discs, covers, clamps, braces, disc springs, angles and gears

Toolmaking
The following services offered by our professional expert toolmaking:
- Project development to series production
- Tool design
- Prototype production
- Construction of composite tools, drawing tools, stamping tools, bending tools,
Fine-cut and cutting tools as well as devices

Subsequent processing
- Vibratory grinding, brush deburring, drums, tape loops with automatic feed
- Heat treatment - all standard methods (inter-stage hardening, Nitriding,
Hardening, and Nitrocarburizinga)

Surface Finishing / Surface coating
- Powder coating, KTL, painting
- Electroplated coatings of Au to Zn / Ni (chrome plating, galvanizing, burnishing)

Assembly production
As a system supplier, we offer our customers from different industries all from a single source - from product development to the mounted assembly.
- Inert gas welding (TIG / MIG / MAG)
- Robot welding
- Stud Welding
- Spot and projection welding
- Pressure joining (Clinching / clinching)
- Riveting, caulking, gluing

Uniblech GmbH supplies well-known companies in the automotive industry worldwide as well as construction machinery and machine manufacturers in the area of thin sheet metal construction.

Our location is located in the southern foothills of the Hegau just before Lake Constance. Our focus is on laser cutting, punching, bending, welding and component assembly.

The entire production takes place on the most modern processing machines that are currently available. Always ready to make everything possible for our customers, we are always interested in problem solutions, custom-made products and new ideas.

UNIMET is an expanding metal processing company and was founded in 1975 under the name “Schlosserei Ausserhofer”. We carry out all metal work and are particularly specialized in series work, sheet metal processing and housing construction. Our production area is equipped with the latest CNC processing machines.

This and our highly qualified employees ensure rapid and high-quality production of the respective orders.

Our strengths lie in our high quality standards through professionally qualified long-term permanent staff, a high level of training, our flexibility, adherence to schedules, market adjustment and customer proximity.

We specialise in producing food industry process assemblies as well as any product that has to do with stainless steel.
We have the ability to provide the following services in house :
- Sheet metal laser cutting.
- Tube & Pipe laser cutting.
- CNC Bending of sheet metal and profiles.
- CNC Milling ( 4 Axis )
- Manual Turning.
- Parts bead blasting & Brushing.
- TIG, MIG, Laser & press welding.
- Orbital Welding.
We outsource the following :
- Powder coating.
- Anodizing.
- Galvanizing.

Consortium of companies operating in the development of foreign markets.
It acts as sales department for the export of a number of small medium-sized industries located in the Veneto region, all operating in the sub-supply in the mechanical industry.
Our partners can offer, among others, the following main operations:
• Turning
• Milling
• Grinding
• Gear Making
• Cutting and bending of sheet metal
• Sheet Metal Forming
• Assembly
• Complete Subassemblies

Operative Office in Corso Fogazzaro - Vicenza IT

For more than 45 years, we at voran® have been a reliable partner for contract manufacturing in the fields of sheet metal and welding technology. Our many years of experience enable us to offer a wide range of services and to respond flexibly to the individual requirements of our customers.

Regardless of whether you are a small business, a medium-sized company or a leading industrial company — with us you will find tailor-made solutions in contract manufacturing. Through our professional advice and close cooperation, we ensure that your specific requirements and wishes are optimally implemented.

Rely on our expertise and benefit from our extensive range of services. From prototype production to series production to custom-made products, we support you with our know-how in realizing your projects.

we are a Czech company specializing in welding, machining and assembly work on steel structures up to a total weight of 10 tons
We have 20 years of experience with the following work:

MIG/MAG, TIG welding - production of welded parts up to 10 tons
CNC milling
CNC turning
CNC drilling
CNC flame cutting
Annealing, blasting, painting and other surface treatment
Production of single-purpose machines
Conveyor systems
Processing systems (recycling, industry)
Production or repair of spare parts and devices
Renovation of machine components
Implementation of machines and systems
Assembly work

If you need us or are interested, we would be very happy to offer you our cooperation

We thank you in advance for your response and comments

Special machine for Wagner: Everything does not exist!

We live innovation and look forward each time on new challenges! Whether targeted conversion of trucks, whether trailers, industrial plant or special solutions for your needs - Wagner Special machine puts your desires to professionally!
Mechanics, hydraulics, electronics - we have the professionals at work

We analyze the present problems and develop inter-plant solutions! In Wagner the planning and implementation of electronic, hydraulic and mechanical components are. So that we can surprise you with our solutions. Over and over again.
Produced entirely in Germany

We guarantee our machines! For that reason, we never use on purchases from abroad. We build your products completely in our own workshop. Whether special size or special solution - where it says Wagner Wagner is also in there. And only Wagner!

Project work, production / processing of products according to customer specification: laser,
plasma, autogenous cutting, beveling, bending, flattening and shot blasting of high-strength
fine-grained steel and highly wear-resistant special purpose steel. Design, production
and sales of Weber-own products, e.g. Muldy ®

Focus areas:
•
Processing of fine-grained structural steels up to S960QL
•
Welded structures up to 13 m in length
•
Large components up to 5 t component net weight
•
Mechanical processing up to 6,300 x 1500 x 1800 mm
•
Engineering
services
•
Fixture construction with construction as a business area
Certifications:
•
ISO 9001:2015
vehicle-connecting components)
•
KBA certified in accordance with German and international road traffic law
•
Welding approval for fine-grained structural steels up to S960QL including all process tests from S355 to S960 hand and robot
•
EN 15085
2 CL 1 (rail vehicles)
•
Manufacturer qualification in accordance with DIN 2303 Q2
BK1
•
Welding certificate DIN 18800
7 class E
•
Welding certificate for welding steel structures up to EXC3 in accordance with EN 1090
2
•

•
Approval in accordance with ÖNORM EN ISO 3834
2

Wehner Metalltechnik GmbH & Co. KG is a medium-sized family company with
more than 50 employees, which has been a tradition and
Combining innovation. As a contract manufacturer, we offer you 5,000 m² of production space
a wide portfolio of manufacturing options in the areas of sheet metal processing, metal construction,
Machining and automotive engineering.
In the production halls, our employees produce using laser technology
Sheet metal parts made of a wide variety of materials, which are processed on CNC bending machines into the desired
The shape can be bent and then welded. In addition, components in their own
Machining department on 5-axis CNC milling or multi-spindle turning centers from individual parts to
Series can be machined by cutting. The company's metal workers are once again following the previous
Completed 3D design, such as railings, canopies or other welded structures
according to customer requirements. In another department, automotive engineering, complexes are being created
Traffic surface cleaning machines, which are sold under the OELSPURHEXE® trademark in
Germany and German-speaking countries are distributed.
Both our qualified personnel and the use of the latest machine technology form the
The basis for high-quality production. In doing so, we always attach great importance to a
professional advice tailored to your individual needs.
In order to continue to meet the increasing demands of our customers, we are looking for
always motivated specialists to further expand our team. Trainees are also cordial
welcome and, after completing their training, often become long-standing employees who
Strengthen sustainable growth of the company.
We always remain true to the company philosophy, with curiosity and great commitment to new
to set challenges. This has always guaranteed our success and the trust of our
Strengthened customers.

Wiedenmann KFT and its predecessor companies have been manufacturing steel structures for almost a hundred years. Our employees are constantly receiving further training and are always up to date with the latest technology. Permanent quality control ensures flawless products for our customers and continuous improvement of the QM system gives us the security of having error-free processes in the future as well. Thanks to the combination of modern machinery and motivated employees, we are able to meet all requirements, from simple parts to complex welding assemblies.

We would be happy to provide you with a free offer.

Zambelli manufactures complex sheet metal parts and welded structures with a high level of vertical integration using state-of-the-art production facilities. We would like to convince you of the efficiency and quality of our company.

Our customers appreciate our high level of vertical integration and extensive expertise in the development of complex sheet metal parts from individual to series production.
We offer you the option of purchasing our products either in individual parts or already fully assembled. Our portfolio includes both large and small series as well as custom-made products.