Consultancy, prototypes and series parts For more than 50 years Sass-metal manufactures drawing, deep drawing and bending parts especially for the rubber processing industry. After the experience gained we support at an early stage of development very strictly to our clients in the development and improvement of rubber-metal parts. With the help of in-house design (SolidWorks) the designs can be quickly implemented in tools and prototypes in our own tool. Already in this phase is taken by using a robust quality to mass production techniques. For series production will be built depending on the part geometry insertion progressive or transfer dies. In the part surface (oiled, washed or provided with corrosion protection) take note of the special requirements of vulcanization. As the base material cold and hot bands are used in the thickness range between 1 and 5 mm. To meet the need for lighter components, we also process steel up to 600 N / mm ². Articles of our production, please refer to: Air springs, Metal rubber elements Vibration elements, Hydrobearings, Chassis suspensions, Motor bearings and Machinery bearings. Our range includes: Butted and clinched rings as a substitute for pipe sections, Support rings, Reinforcement rings, Pole plates and flywheels for the electrical industry and Fußkufen for the furniture industry The initial sampling and ensuring the quality in series production takes place according to the established in the automotive industry standards. We are certified to ISO 9000:2008. We look forward to your inquiry.

Sarzi - Sheets is a family company, which was founded in 1978 and are specialized on editing sheets and pipes. The company owns an area of 64.000 m², of which 14.000 m² is covered. The machinery, which deserves special attention, will have constantly the current technology adapted to complete the requirements imposed performance requirements. In the processing of sheets and tubes, we are able to work following execute: - Laser cut laminations - Laser cut tubes - Cutting and welding with laser 3 D - Bending pipes - Bending of sheet metal with CNC-machines - Welding with robots and manually - Sheet metal working with presses - Laser Marking Since we have forty years of experience in these areas, we have the high knowledge necessary to assist our clients with their problems and offer an appropriate solution. Our main customers are in the automotive industry, where we exhaust parts manufacture. However, we are also in the agricultural industry operates where we partly provide for the machinery and earthmoving machinery. Mobile Bridges for aerospace and automation of various components are included also in our program. Since 1999, we work with a quality program, through which we have been qualified. We currently have certificates of ISO 9001, ISO TS 16949 and ISO 14001 standards. We attach utmost importance to current standards and our staff constantly is informed of ongoing training accordingly so that our name in the future all is demands.

Products, we can produce as individual parts in small and very large series by the following processes: Pressing, drawing, punching, shearing, grinding, clinching, piercing riveting, point riveting, drilling, milling, grinding, brushing, oxyacetylene welding, arc welding, spot welding, projection welding, arc welding, tapping, assembly and process materials: Aluminum, steel, stainless steel, plastic for the industry segments: Automotive, automotive accessories, gymnastic equipment, sporting firearms, packaging, etc. If a heat-, surface or other treatment provided for your product, so we can carry this out on our behalf. To get everything from one source, we will be completed with purchased and provided parts. As an innovative partner we have particular expertise in the shaping and in the preparation of compounds of tin with Sheet metal, with pin or socket.

The Company In 1947, Joseph Hegner the family business, which now includes about 30 employees. It employs all relevant occupations in the metal processing: locksmiths, welders, apparatus manufacturers, mechanics and toolmakers. The team of Hegner metal masters all construction techniques. The specialty of our company: We are able to combine the full range of pipe and sheet metal processing and in-house powder coating, we give your products the desired color. We turn your ideas with the most advanced 3D CAD Solid Edge programs and extensive machinery. Is the development of a prototype successfully completed the final details at a first small series have been clarified, we at the series a most efficient processing method. The fair pricing, high quality work, on-time deliveries and open communication convince our business partners. Long-term stability The Hegner team focuses on long-term stability. Good deals which ensure the existence, are more important than sales at any price. So we are also later at your disposal. We think and act for our customers. We create and maintain jobs.

We are your company for metal spinning. As a manufacturer of round symmetrical hollow metal bodies, we are manufacturers, suppliers and development partners for our customers from all over Europe. From the prototype to the serial product with production lots of up to 10,000 pieces. We are proud that we have been involved in numerous pioneering projects for decades and are valued by our customers as a loyal and competent partner. Already in the second generation, we are working on your solutions with our long-standing employees and our highly motivated junior staff.

The ARNO HENTSCHEL GmbH was founded in 1943, re-privatized in 1990 and now presents itself as a powerful, pan-European supplier for the steel construction, metal and engineering, will find its metal products and forming tools in almost all industries worldwide use. The product line includes more than 1000 positions, about 750 of them alone in the stamped part segment. Products: - Grating fasteners and accessories - Gitterrostbau to customer - INFORMATION GENERAL punching Article With its own, powerful tooling and modern equipped fabrication shop we are able to quickly and flexibly to customer wishes, what our great product range reflects. We offer: - Forming - Cutting, bending and square tools - Follow-on composite tools - Wire EDM As a medium-sized company HENTSCHEL ARNO GmbH is always in a position, good value for money to offer to guarantee the shortest production times for "tailor-made" grids and shortest delivery times for stamping parts through its own extensive inventory.

The ARNOLD GROUP stands for intelligent and pioneering fastening technology worldwide. Based on many years of expertise in the production of highly complex extruded parts and innovative fasteners, ARNOLD has long since established itself as a comprehensive system provider and development partner for integrated fastening solutions. The BlueFastening Systems philosophy emphasises this holistic approach: the close integration of engineering, high-quality fasteners, precise functional parts and state-of-the-art feeding and processing technology ensures maximum efficiency, sustainability and global innovative strength - all from a single source. ARNOLD has been part of the Würth Group since 1994 and is driving the future of fastening technology with maximum precision and innovative strength.

Manufacturing of mechanical components for automotive,agricultural machinery and hydraulic industries.

Since 1971 OF.ME.TRA. is specialized in cold metal transformation operations, in particular: cold stamping, sheet metal drawing, cold blanking, transfer blanking and progressive blanking. The company's production, the result of sheet metal stamping, shearing and deep drawing processes carried out in full compliance with current regulatory standards and with the aid of technologically advanced machinery, is aimed at companies of the most different product sectors in Italy and in Europe.

We operate in the field of metal processing with the brand of ARLA METAL PROCESSING CENTER within our company. Our company, Gokdelen Scaffolding and Formwork Co. has been offering metal processing services and manufacturing scaffolding and formwork for 35 years in Turkey. Thanks to our existing machine park and experienced staff, we can perform all laser sheet metal cutting, bending, welding, electrostatic powder coating and packaging operations you need. I can express some of the machines in our company's machine park, which are as follows: • Bystronic Laser Cutting Machine • Bystronic XPERT Pro 150/3100 • Bending Machines • Profile and Pipe Bending Machines • Welding Robots • CNC Vertical Lathe Machine • Electrostatic Powder Coating

Dear ladies and gentlemen, We are very pleased to announce that we are offering services from now on. We are a technically oriented company that has held its ground since 1835 and is growing dynamically from the 19th to the 21st century. Today, REMARC has 40 employees and stands for high-quality product developments: construction, design, steel construction and powder coating. Suppliers from Germany — a success story made in Germany. Our services are as follows: laser cutting edges welding with the Cloos and Severt welding robots and by hand Weichten pressing Assembly of components construction We also have the option of further refining your product with powder coating. We believe that we can optimally support you with your process or product. We would be delighted to have the opportunity to work with them and to demonstrate our skills and qualifications. Have we sparked interest? Please feel free to contact us. Company Remarc GmbH Hollener Strasse 51 26670- Uplengen Jübberde Requests to the following emails: pulver@remarc.eu Blech@remarc.eu We are available at any time for questions and offers. Please feel free to visit our homepage. https://www.remarc.eu/

Metal technology and construction machinery Metal technology: structures, entrance gates, terraces. Construction machinery: new structures, mechanics, service. Automotive technology: sheet metal & body, repair work, spare parts.

Dinzl Ordnungstechnik GmbH is your competent and fair partner in the field of metal processing. With our extensive experience and expertise, we provide high-quality solutions for your individual requirements. Specializing in the processing of materials up to a thickness of 5 mm, we are capable of producing precise and top-quality products. Our services cover the entire production process, from raw boards to final or assembly. We employ state-of-the-art technologies and processes, including punching, laser cutting, nibbling, bending, and folding. Welding and spot welding are also part of our comprehensive range of services. To ensure that your products are not only technically flawless but also aesthetically appealing, we offer high-quality powder coating. This not only protects against external influences but also enhances the surfaces with an attractive appearance. However, our service goes beyond mere production. We also take care of the storage, picking, and stretch shipping of your products. Through efficient logistics, we ensure timely delivery and minimize waiting times for our customers. Dinzl Ordnungstechnik GmbH stands for quality, precision, and reliability. We take pride in being not just a supplier but rather a partner for our customers. Contact us to collaboratively develop tailored solutions for your metal processing needs.

Founded in 926 in Kassel, Hesse and anchored in East Westphalia since 1945 Since 2000 with 2 plants in Poland and since 2006 with one plant in Turkey, Coko employs a total of approx. 1,300 people with a growing trend.

Since its founding by ALOIS RETTENMAIER in 1914, the company is in Familienbesitz.Als trained steel engraver founder placed particular emphasis on sophisticated and detailed elaboration of designs and embossing tools. Since then our product range has also for the club need constantly erweitert.Heute and in the future, it is our endeavor to meet the highest quality standards. Skilled employees enable the production from design to final product under one roof. Our strength is to realize special requests of any size carefully and at short notice. Constant advancements in tool made it possible to manufacture precision stamping and bending parts, among other things for well-known automobile manufacturers. In addition, we are a manufacturer of keychain, belt buckles, tokens, badges, bottle openers, letter openers, lettering, advertising signs, tie clips ... Our assortment is huge.

We are a company with many years of experience in the production of catering equipment, steel accessories, steel light and semi-heavy structures (aluminum, stainless steel and steel ...) and powder coating and sandblasting as a complete process. We use modern CNC machines (laser, punch, bender 3m, 4m to 6mm sheet metal bending thickness ...) in all phases of material production and processing. Our certified welders are qualified to do demanding work, and all this is accompanied by a professional team, which with the latest programs prepares the basis for the preparation of documentation and monitoring of the production process

As part of the Kurre Group of Companies, we employ over 230 people who understand their craft. We deliver the perfect result — whether individual parts such as prototypes or unique pieces or series productions in variable runs. It is our aim to always be able to offer you, our customers, the latest possibilities of what is possible. That is why we are constantly investing in new technologies and expanding our machinery. In addition, we are constantly developing ourselves and our employees. In this way, we guarantee you solutions that are both efficient and innovative. In addition to contract manufacturing, we can also offer the complete package with our own design office. Your ideas are in good hands with us and, after detailed advice and planning, will be implemented precisely and precisely. In addition to clean production, we are also happy to ensure professional order picking including labeling — standard service for the generalist. Thanks to our Fast Lane system in collaboration with an experienced team, we can often offer your wishes even with shorter delivery times.

MARKC, Miha Mlakar s.p. is a Slovenian tooling company specializing in the development and production of high-quality stamping tools, jigs, and low to mid-volume metal parts. Founded in 2022, we quickly evolved from project management into full in-house manufacturing. Our capabilities include progressive, transfer, manual, deep drawing, and prototype tooling. We support customers from initial 3D models and engineering (including simulations and CAD design) to machining, assembly, tryouts, and final implementation into serial production lines. Our in-house equipment includes CNC milling (HAAS, TRIMILL), Wire EDM, grinding, and hydraulic press systems (tool sizes up to 1100 mm). We also collaborate closely with trusted local partners for services such as 5-axis machining, laser cutting, thermal processing, and CMM measuring. We aim to continuously grow our production capacity, with plans to expand machinery, introduce 2D laser cutting, and enlarge our production area by 2027. Located in Stari trg pri Ložu, Slovenia, MARKC is committed to precision, flexibility, and long-term partnerships.