We, Metallbau Schmalenbach, specialize in manufacturing a wide variety of high-quality and tasteful stainless steel and corten steel accessories. Years of experience in working with metal products, experienced know-how and the gift for exceptional design give our products uniqueness. The focus is on narrowing down to the essentials. In a charmingly flooded world, peace and relaxation are important to us. Simplicity is the goal and with it the uniqueness of our products.

In addition to our wide range of products, we also offer you the opportunity to have your ideas implemented. We offer you custom-made custom-made products. You are welcome to visit us at Linienstr.14 in 42289 Wuppertal.

We support you from product idea to economic product implementation. We focus on competent advice and the development of cost-effective alternatives.
Our quality awareness in accordance with DIN EN ISO 9001:2000 is the focus of our daily work. Even when developing products, we pay attention to progressive and sustainable documentation.
Production and surface protection of fan covers and ventilation systems for general mechanical engineering, commercial vehicles and railways as well as steel furniture and ship window boxes for seagoing ships and stationary systems.

Mey Maschinenbau Prien has been designing, producing and optimizing precision mechanical OEM products for a wide range of industries for more than 50 years. Our team of more than 200 employees will implement your ideas at our three facilities.

Our headquarters are in Prien am Chiemsee, while our other production facilities are in Nyúl and Győr in Hungary. This allows us to achieve an optimum cost mix, optimize the manufacturing of your product and pass the potential savings straight on to you. We always strive to act personally, conscientiously and flexibly, whether we are working with our clients or amongst our colleagues. These values guide our way of working and the resulting quality is reflected in your products.

Our core competencies are:

Tools - Hard Metal Processing
- Sheet metal rounds
- Punching / pressing (tool Falling)
- Punching-bending (Bihler machine)
- Stamping

- Injection molding, extruding
- injection molding
- Encapsulation of inserts

- To water
- Die-casting
- Ingot
- Machine molding (sand casting)

Translation by Google Translate

Miglio has been operating since 1971 in the progressive die construction, stamping and sheet metal processing sector, providing turnkey solutions for customised products.

What we offer
- Co-design of Products with the customer
- Prime project management of assembled parts
- Collaboration on process development
- Production of small and large batches of stamped and assembled products
- Complete control of the entire production process:
> Die design: 3D software, Cad-Cam, prototyping;
> Die construction;
> Die maintenance: dedicated internal tooling.

Miglio is focused on the customer, people and the environment.

Our customer approach is based on relationships and the continuous exchange of information, which allows us to offer a precise and “tailor-made” service based on specific needs. Therefore, solid and trusting relationships are established with the customer, which make Miglio not just a simple supplier, rather a strategic partner.

Another of Miglio’s founding principles is attention to the environment in all phases of work, from the pursuit of the most innovative solutions for machinery dedicated to production to company and plant management.

Our strength, in addition to the high technical skills of our personnel and our instrumental equipment, is largely thanks to the people who collaborate in the company and in whom we continuously invest in order to organise a satisfying and engaging work environment. A note of interest: the staff turnover within the company is very low, if not almost non-existent.

741/5000
we are a family company based in Slovakia. Our company is located in an industrial area in the city of Skalica.

We are looking for more business partners. We deal with the technology of forming and offer free capacities in the areas of punching, cutting, bending, folding, riveting, assembly and various control activities (measurement, sorting, etc.)

We also produce metal parts that are then coated with plastic.

We deliver among other things Customers in the automotive, electrical and furniture industries. The ISO certificate 9001: 2015 is a matter of course for us.

You can find more detailed information on our website.

We would be glad about your answer.

We are a leading manufacturer of state-of-the-art, top-notch

vacuum components, either large series and/or tailor-made batches !


We are committed to matching our precious customers material handling

requirements with the best solutions on unrivalled terms and conditions.


We are looking forward to a successful collaboration with you.


Please feel free to contact us -24/7-, I will be utmost delighted

to submit you an unbeatable offer.


Thanks in advance for having us.


Diamantino S. ISIKCEVAHIR (MSiE)
(Global Business Development Manager)

- Manufacture of stamping parts according to sample or drawing to 1250 kN

- Manufacture of stamping parts made of copper, brass, aluminum, bronze, steel, stainless steel up to 3mm thickness from tape using electronic feed, up to 6mm from sheets or strip

- Manufacture of stamping parts made of non-metallic materials

- Point-and inert gas welding (MAG, TIG)
- Drilling
- Tapping
- Thread rolling, knurling +
- High gloss polishing by polishing rotary table (6 stations) or manually
- Supplier `s and-drag to 80 mm in length (even more grooves per part possible)
- Belt loops
- Mounting (single and assembly)
- Cleaning of stampings using cleaning machine
- Special solutions


In cooperation:
Laser technology (also 3D) laser, laser welding, Bending, CNC punching nibbling, turning and milling parts, surface finishing, tool

- Quantities of 100 units to 5 million units

Technical Trading Dreh-/Fräs-und for sheet metal parts

We see ourselves as a full-service supplier with a focus on customer-specific operating units and offer the production of electromechanical assemblies and the procurement of all necessary components.
We support our customers in the realization of their products and produce them economically and in the highest quality.

Individual silicone rubber keypads ? A plastic housing for your electronic device ? A spring-contact magnetic connector with cable assembly or a complete handset ? We can do it all.

We see ourselves as a link between production plants in Asia and our customers in Europe. Our strengths lie in the technical advice and support of our customers projects and in a professional procurement, quality assurance and logistics. Our customers benefit from a variety of services such as:

- Technical support from the first idea to series delivery
- Optimization of technical specifications for product safety
- Development of cost reduction options
- Support in development & design tasks
- Technical tests and analyzes in the N & H laboratory

Through highly qualified German and Chinese engineers in our company, we communicate excellently with our customers and supplier, even about complex technical issues. On customer demand, we also can take over entire development and design tasks. A creative and dynamic way of working, as well as tolerance and honesty characterize our cooperation.

All products are manufactured by our long-standing supplier network in Asia. All production plants are certified according to ISO 9001, ISO 14001, TS 16949 and ISO 13845.

Manufacturing according to European quality standards at economical prices is our constant endeavour. With the aim of being an attractive long term business partner, we are constantly expanding our portfolio with new products and technologies.

Our customers include well-known German and international companies in the automotive industry, medical technology, telecommunications, industrial automation, building control technology and other industries.

Precision rotary parts, - milling and ground parts (Ground parts)
- Transmission shafts (drive shafts) to 1500 mm, hollow shafts, rotor shafts
- Flanges (Intermediate), bolts, fittings, machine components
- Cells wheels, worm shafts, knife shafts.
- Guide rails, shaped pillars

Machine Knives Knives industrial Press Brake
- Perforating, squeezing knives, shear blades, packaging knives. Knives for plastics industry, mill knives, textile knives, sheeter knives, crush cutter, foil knife, knives, tungsten carbide blades, serrated blades, welded-on blades, slitter knives, Plotter and other machinery knives.

Circular knife round knife
Circle diameter (round blade) are rotating tools that can be (with counter-blade) was used with a knife cut or shear cut method. Circle diameter (round blade) can be produced for different applications from different materials (stainless steel, tool steel, HSS or stainless steel).The particular design can customized (eg ground on both sides, toothed, 2-wading, etc.). There arise because different names such as, crush cutter, top cutter, bottom cutter, pen-knife, plate diameter, perforating circular knives, rotor diameter, roller blades, etc. In addition, we also manufacture the knife holder and knife shafts and induviduelle cutting devices. The regrinding of circular knives is almost always worthwhile.


Punching tools
Punching diameter:
Punching knife and cutting die are made from solid steel (eg tool steel 1.2379). The blades are hardened and ground. Punching blade made of solid material, are especially suitable for punching work with very precise contours as well as for long-term use, as they can be reground. Made of solid steel, we can also very small and precise punching knife and punching iron manufacture (eg samples dancing).
Dies:
We manufacture cutting knife and cutting dies from hardened steel strip and for a variety of punching tasks.Depending on the application, band knife made of spring steel, carbon steel, tool steel, stainless steel. Compared with the cutting knives made of solid steel, they are affordable and are suitable especially for disposable knives as well as large punch surfaces. We have stamping tools for individual tasks.


- Cutting die, die cutting knife, cutting knife for test specimens, punches, punching, stamping dies, Steel rule dies, punches,
- Cutting rollers, cutting mills, crushing blade
- Punches and dies, punches, forming punches

Flat - and cylindrical grinding
- Surface grinding, surface grinding up to 3000 mm length
- Cylindrical grinding up to 400 mm diameter
- Fine grinding, lapping, polishing
- Carbide Grinding

Roll manufacturing roll grinding and
- Rolls, roll cores, drive rollers, winding rollers, form rollers, fluted rollers
Nippers, the cutting rollers, roll forming, turning rolls

Nuova CAM has more than 40 years of experience in the fabrication of high-quality metal products from sheet metal, tube and box sections. We work with leading Italian and European customers within diverse sectors, including but not limited to food processing, packaging, medical, farmaceutical, personal hygiene and sanitation sectors.
At our modern facility located in Bastiglia (North Italy), in addition to standard metal fabrication services including CNC machining we offer also product design, assembly and integration and metal finishing.
Thanks to our engineering expertise, and manufacturing resources we can create extra value to our customers managing your supply chain and/or acting as a single source manufacturing solution for customers requiring complex sourcing, manufacturing and assembly. Our customers can rely on our complete service from concept advice and prototypes to continuous manufacturing and supply.

Our company was founded on 28.02.2005.
It builds on the experiences that have been collected for years in the FIRE tool-und Maschinenbau GmbH in the field of stamping production.

The acquisition of new hydraulic presses and the investment in a new
Production facility enables us your client's wishes and not least
Your product innovations enhanced implementation.

We will advise you in the choice of materials and develop with you a tool concept.
This can be thanks to the close cooperation with the FIRE tool and
Maschinenbau GmbH are implemented quickly and effectively.

Production of stamped parts

Stampings band
Stamping parts with thread
Pressed, stamped and drawn parts
connected tooling with 35 employees since 1992
CNC milling 3/5-Achs CAD CAM
CNC turning
CNC Wire EDM
CNC sinker EDM


List of machines

We can customize your stampings on the following machines:

Belt systems - 600mm width 8mm tape cross-section

Eccentric EBU 1000 KN 80Hub/min
Eccentric PME 2000 CN 80Hub/min
Eccentric EBU 2000 CN 80Hub/min
Eccentric PME 3150 CN 60Hub/min

Insert presses:

Eccentric Helmerding 850KN 60Hub/min
Hydraulic press 250 kN
2x Hydraulic Press 400-630

Established in 2012, Pamtek Metal has become one of the leading providers of precision sheet metal manufacturing and engineering for companies in various industry sectors in Turkey and around the world.

We have been providing our customers with innovative and comprehensive manufacturing solutions for nearly 10 years. From initial design to mass production, our customers of all sizes rely on us for product and process expertise in the execution of their OEM business.

As Pamtek Metal, we offer our customers a reliable, single-source manufacturing partnership with unconditional customer satisfaction, operational excellence and dedication to high quality. With our business-partnership approach we offer, we help our customers to be decisive in their own fields and to provide competitive advantages.

Paolo Inglese Spare Parts GmbH is a system supplier in the areas of sheet metal processing, steel construction and special construction. In addition, we produce filter systems for machine tools under the brand name Seitz Filteranlagen.

Since 2005 we develop with our partner companies, new approaches and innovative solutions for the production of technical parts and assemblies. Our slogan "New Thinking! New action! New ways! ", We carry a competent and reliable contribution to your company's success. We advise our customers both during the product development process as well as the optimization of existing products in terms of the structural design, as well as on the use of suitable production methods and materials.
We specialize in rotary swaging, spin forming, cold forging, machining (cutting all kinds), sintering, MIM, hot forging, stamping, deep drawing, sheet metal forming of all kinds, die-cast zinc, cast aluminum, cast iron, fasteners, ductile iron, cast iron and lots more!
We enable potential costs through the re-design of your purchasing parts with the help of TRIZ methods, value analysis and Attributive sourcing.

From our own (100% WFOE) production plant in China, we provide in-house manufacturing of injection molds and injection molded products. This is the only way how we can secure the quality and protect your Intellectual Property, so you can rest assured that your product is in safe hands. QDP has more than 20 years experience in injection molding and product development.

We are a medium-sized company based in Ganderkesee and have been producing sophisticated sheet metal and formed parts for our customers for over 65 years.

Our customer base includes the automotive, mechanical engineering, electrical, marine and aircraft industries, where we are listed as an A-supplier and have already received several awards as a 0-ppm supplier.

Our company is fundamentally different from other companies that can produce either only large or only small series at low cost. We are proficient in both technologies.

Since we are convinced that only holistic quality and sustainability can lead to success today and in the future, we have a certified integrated management system in accordance with the requirements of
IATF 16949, DIN EN ISO 9001 and DIN EN ISO 14001 established. (ext. TÜV Cert link).

Our homepage is intended to give you a brief overview of our diverse production options.

We would be delighted to work for you too.
Give us a chance to do that.

RTC Engineering is a globally operating technology company based in Slovakia, with a current team of over 140 professionals specializing in various fields such as Engineering, Precision Machining, Welding, Project Management, Assembly, Surface Treatments, and Integration.

Our technological capabilities include:

12 CNC Milling machines (6 Five-Axis Milling machines)
5 CNC Turning machines
2 EMD Cutting machines
Flat & Round Grinding
Quality Inspection (2 CMM Carl Zeiss, Hexagon Scanning Arm, etc.)
TIG Orbital & Manual Welding (20 welders)
MIG Welding (20 welders)
NDT Inspections
Heat & Surface Treatments
Assembly (Mechanical, Electrical, Pneumatic, Control Cabinets, etc.)
Integration & Testing

At RTC Engineering, we are committed to delivering high-quality, precise, and innovative solutions to meet our clients' diverse needs. Our state-of-the-art equipment and experienced team ensure that we can handle complex projects with efficiency and excellence. We pride ourselves on our ability to integrate various technologies and processes to provide comprehensive services from initial concept through to final implementation and testing.