The Mechanical workshop Wunderlich GmbH was founded in 1985.

The focus of the company are in the areas of CNC metal processing, welding, punching, bending and forming.
In 2008 the company was taken over by the current managing director Jürgen Flaig and - with the aim to achieve further specialization Grade - modernized rapidly. The production capacity of the company, the technical equipment and the demands on qualified employees grew steadily since then - step by step, year after year. Today one finds a modern manufacturing facility in the industrial area of Selb, only 2km away from the driveway to the A93.

Our customers are located in very different industries and find us versatile and competent contact for metalworking. We are able to manufacture a very wide range of products able, ranging from one-off prototypes or replacement parts to high volume series production.

We are particularly strong in the milling of large components on envelope, within the tolerance range of + / - 0.001. So workpieces of up to 4.000kg are workable on our horizontal milling machine.
By now, we are in a position on our state of the art fully automatic circular saw for aluminum profiles of all types and solid material to cut highly accurate and reliable process and edit.

Some technical details:
• CNC-controlled machining of turned parts up to a diameter of 920mm and a length von1.050mm axially and radially driven tools offer the possibility of finishing in a single setup.
• Conventional turning complex parts up to a diameter of 1.020mm and a length of 3,000 mm.
• CNC-controlled processing of milled parts: a 40-tool magazine and reduction of non-productive time allowed an enormous rapid traverse rate, input power 40kw and spindle taper SK50 size.
• Conventional milling of complex parts or small series.
• CNC-controlled machining of large milling parts: 5-axis horizontal milling machine, machining of workpieces of up to 4.000kg in a single setup, tolerance + / - 0.001 mm, spindle power 63kW, pulling force of 2,000 kg axles, spindle taper SK50.
• Pull grooves or grooves evacuate to a hub length of 350mm and a groove width of 42mm.
• PLC controlled sawing aluminum: our state of the art fully automatic circular saw for aluminum combines the speed and cycle times of common pneumatic saws with the precision and accuracy of cut of a hydraulic system. Continuously variable speed, 15kw drive for stable average values even with aluminum solid material up to 115mm.
• Mechanical eccentric presses up to 250 tons and hydraulic presses also to 250t, which are suitable for a muted die cushion also for deep drawing.
• Various welding jobs for steel, stainless steel and aluminum for TIG and MAG.
• hall crane for parts of weldments up to 8 tons.
• Also strong we are in the turning of small parts as well as in laser cutting and bending.
• Our partners assist us in processing with the following method: Galvanic zinc coatings of any kind, pickling, hot-dip galvanizing, painting and powder coating, nickel plating, tin plating, chrome plating, Hartaufchromen, Maßhartaufchromen, plasma and gas nitriding, carburizing and vacuum hardening.

The company is certified according to ISO 9001:2008.

Worldwide, our products are used, which requires high level of responsibility and quality. A goal that we face every day.

Thermotec AG is an experienced producer of sheet metal components and assemblies through to the assembly of packaging for consumer products. This know-how with the expanded capacities can now be used for company growth.

Our company was founded in 1994. The owner of the company and immediately managing director is Mr. Dezső Uri Szabó. Our company is located in Budapest, in the 15th district, right next to the M3 motorway, and covers around 14,000 square meters there. Our production halls have a total size of 4,000 square meters, divided into 3 areas: These are: press shop, welding shop and tool shop.

Deformation of cold rolled strips with press:
In the field of classical stamping production is possible on eccentric presses from 40 to 250 tons, as well as hydraulic presses up to 250 tons. The product size ranges up to about 500 mm in length and 4 mm in thickness.

Fine blanking:
Fine blanking is a special technology or so-called punching "without air" between the Schneidematrize and the knives (0,5 - 1,0%). This method is especially useful for highly sophisticated products in question, which are dentate different. The maximum length is about 500 mm, and the maximum width of 6 mm. This allows the tolerance of + / - 0.01 mm, a uniformity of the cut edge and the clipping with minimal needle on the edge.

Drawing and deep drawing:
Deep drawing is a mode of production, with the preparing various hollow shapes such as rivets, drawing dies, industrial electric parts and the like. The diameter ratio to the length is up to 1:2.5. Of course, these products have a smaller extent, forExample up to 20 mm.

Screws:
TKG doo manufactures screws of the small range in diameter from 2 to 6 mm and using the most advanced technology of cold deformation, which has displaced pivot screws in the world due to their cost-effectiveness.

TKG provides doo screws forth in accordance with the ISO and DIN standards. We also produce special screws design according to the plans and patterns in collaboration with technologists and designers of customers. Screws can be thermally edit and galvanically protect, depending on the location and type of operation.

TMK MACHINERY MOLD INDUSTRY

Turkey's Mold Design Specialist
Welcome to Tmk Machine Mold Industry.

TMK MAKINA is a professional company in design and installation of sheet metal molds. Our firm uses CAD-CAM programs and CNC machining machines in molding technology. Our company has an experienced staff. We have a very strong references in domestic and overseas.

TOKOZ a.s. is Czech engineering company focused on building fittings, components for automotive industry and components for other industry areas.
TOKOZ a.s. offers to customers completely services:
- development
- tool construction and manufacture
- die casting of Al and Zn alloys
- stamping (pressing)
- assembling
- surface finishing (powder painting, galvanization)
- package, transport and after-sale customer servicing

TOKOZ a.s. dispose of:
- modern mechanical equipment
- specialized staff
- experience with supplies into automotive and building industry
- favorable demographic position
- quality certificates: ISO 9001:2008, ISO/TS 16949:2009, ISO 14001, ČSN OHSAS 18001
- certificate of solvent

Tomaco-Intro sp z o.o. is a manufacturer of bandsaw strips for cutting of raw wood. The tools are made from high quality alloy steel and meet highest requirements of the customers.
The company is also a manufacturer of covers for Fastbind hot glue bookbinding machines