The milling of precision components is our core business.
It has been so from the beginning and today we can propose solutions to the most complex problems efficiently, quickly and at competitive economic conditions.
To do this in the best possible way, we provide assistance to our customers in the industrialization phase and we can provide a complete production management service, starting from the design to the management of the finished component, marked, assembled, packed and shipped.
Markets:
For historical reasons and for its territorial location, C.N. Meccanica has developed extensive experience in the production of mechanical components for automatic machines, in particular in the food, pharmaceutical and tobacco sectors. For these sectors, very often we also produce format components.
The great flexibility of our machines allows us to be very competitive both in the production of prototypes and in the production of medium series with multi-pallet machines, even if not manned.
We currently produce mainly for large clients operating in the packaging, machine tools, measurement equipment and systems and aerospace sectors.
Quality and precision: usually these two words are associated only with the finished product.
At C.N. Meccanica, we believe that all our actions must be carried out according to this philosophy.
It is not enough to deliver a perfect component but, for example, it is essential that the documentation that accompanies it is clear and exhaustive, that they have been carefully stored and that the packaging preserves it during transport.
This is why each of us strives every day to do our job “a little better” and to make sure that, every day, even the work of our customers is “a little better” thanks to C.N. Meccanica.
The company is equipped with milling machines and a numerically controlled work center, supported by machinery and equipment suitable for the preparation, control and finishing of the components produced.
There is also a programming office equipped with the software necessary for the study and implementation of machine tool production programs.
The training of people is done both formally and informally, supporting the most experienced people with the youngest every day to make their professionalism grow.
We collaborate with local Technical Institutes and training institutions, we host their students for internship periods and some of these have been added later.
Dimensional testing is not only a verification of what has been produced, but it is part of a work style that qualifies and makes the companies that have integrated this activity into their process grow.
From the beginning, C.N. Meccanica has equipped itself with equipment and trained personnel dedicated exclusively to this activity to ensure that each component delivered complies with what was requested.

WHO WE ARE
We are a group of artisan companies, mainly metalworkers, who have been working together for more than 40 years, gathered since 27 November 1980 in the Milanese Consortium of artisans of production.
The associated companies operate in the subcontracting market and, specializing in different processes or even competitors with each other, collaborate in the execution of the orders of a medium-high customer acquired by the Consortium.
Comarp thus presents itself on the market as a single reality. Our uniqueness is the offer of a Unique Service in Italy: we deal entirely with the realization of complex orders by offering our customers a “turnkey” product.
This is possible thanks to the plurality of Comarp constituent companies that come together as a single interlocutor to better serve customers.
Cancellation of problems related to logistics, time savings and lower costs are immediate competitive advantages deriving from our service. The values that have always guided us are the satisfaction and priority of our customers. The Comarp receives the order from the customer which can be on a working account or in a complete supply. Once the order has been acquired, Comarp develops the order to the Members according to the processes to be performed.

SPECIALIZATION
Co.m.ar.p realizes the finished product or complete processing cycles with interventions of:
turning
milling
toothing
grinding
boring
cutting, deep drawing, punching, bending
HVOF PNTA cladding
laser cladding (in Italy the only one for third party)
Consortium works on behalf of third parties ranging from the production of small parts to medium and large mechanical technical details, based on the customer’s design. The company performs precision mechanical machining.

ADVANTAGES
This organization of the work and the atmosphere of collaboration between the members goes to the customer’s whole, not only in terms of speed of deliveries but also in terms of quality of the work done. The complementarity between the companies that together can offer complete production cycles is the winner.

We have for parts as well as tool and fixture "tool and machine engineering GmbH & Co. KG Cosmici" founded the company and spun off this area from the ProAss GmbH.

We also have certified the Cosmici tool and machine engineering GmbH & Co. KG in accordance with DIN EN ISO 9001:2008!


30 years of competence in - purchasing, production and installation in tool and machine! And new - Laser marking!

Your complete supplier of tool and plant, drawing parts and cast iron.

We bring our experience and knowledge to your projects. 2,000 employees in over 70 partner companies provide us with advice and practical help. We set ourselves high goals, take on any challenge and find optimal solutions.

Take us through the latest technology, sophisticated Produtkionsverfahren and modern machinery.

Your ADVANTAGES:
SIMPLE - A point of contact for comprehensive and flexible care
MONEY SAVING - lower costs by scattering or bundling
SAFE - Reliable by quality control and modern technology
SAVE TIME - With high delivery speed and outsourcing

Challenge us!

Costruzioni Meccaniche Alto Milanese S.r.l. provides a comprehensive subcontract machining service incorporating CNC and conventional production technologies. With our heritage of machine tool building, we serve the agricultural, industrial, and general engineering sectors. Main experience and specialization of Costruzioni Meccaniche Alto Milanese S.r.l. is the gears manufacturing and we offer an accurate production according to customers' drawings.
Our services include processes such as raw material supply, heat treatment, surface finishing and assembly.

Mr. Giovanni Sommaruga founded Costruzioni Meccaniche Alto Milanese S.r.l. as an independent company in 1955 in Cassano Magnago. Over 50 years of experience has made Costruzioni Meccaniche Alto Milanese S.r.l a reality, always willing to find the most appropriate solution to satisfy the request of its customers.

So successful has the ability to engineer solutions become, that our business is based on a very loyal, technically demanding customer base that has created a high ratio of repeat business.

We are dedicated to continuous improvement, assure 100% customer satisfaction, and look forward to loyal collaboration with our customers, both on the national and international market, to solve their most demanding needs. On our side we bring the technical know-how, reliability and discretion that have proved successful since we have been established.
Committed to the highest levels of quality, we are certified and registered since 1998 to SN EN ISO 9002:1994 and from 2012 to UNI EN ISO 9001:2008.

Cramer Schleiftechnik not only grinds, modifies, repairs and coats existing cutting tools, but we also manufacture special tools according to your needs and specifications, which are not yet available on the market. By professionally regrinding, coating or repairing cutting tools, you can significantly extend the useful life of tools and thus save considerable costs. With special tools specifically tailored to your production, it is often possible to combine several work steps. In addition to cost savings, this often results in shorter production times or higher production volumes in the same time compared to several steps with standard tools. With all our services, we clearly focus on your wishes and needs and react flexibly to changes or special requirements. Precision, quality and on-time delivery are a matter of course for us in all services.

We are a company specialized in industrial manufacturing of products and parts with with CNC and laser in solid wood, plastics and other materials.
We manufacture all kinds of pieces and finished products like auxiliary furniture parts, lightning, homeware, decoration, packaging and advertising stands.

We are specialized in industrial production that requires high quality standards.
All manufacturing processes are done entirely in our facilities to ensure high quality standards.

We are engaged to respect for the environment so we only work with providers that certify responsible purchase and ensure eficient waste management.

Dannecker fine-tec gmbh was founded in December 1997 by Willy Dannecker and his sons Thomas and Stefan. Turning, milling, grinding, assembling: these are our core competencies. We regularly bring our machinery up to the latest technical standards. This means that we are well equipped for the highly efficient production of precise parts.
Dannecker fine-tec gmbh operates in a highly technological, dynamic and innovative market. The customers of dannecker fine-tec gmbh are internationally active and demanding companies that are leaders in their respective fields of competence. Powerful suppliers - material, special processes - make a significant contribution to the added value and further development of dannecker fine-tec gmbh.

Allweier is a family-owned company, established in 1970 by Hubert Allweier and his wife Edith Allweier. Since then, the company has continuously grown up. Currently, the production space available amounts to 6,500 sq. m and will soon be further extended. At our site, we currently employ 180 employees and 16 apprentices.

DEEP HOLES Group is specilized in DEEP HOLE DRILLING of plates, dies, matrixes, welding and bonding equipment, rollers, shock absorbers, shafts of any type.

Thanks to the use of special equipment, we can drill any type of material, including Titanium, Maragin steel, Inconel, Monel, Copper, Astelloy, stainless steel and all other types of heavily alloyed steel.

We use two different drilling systems are used. With straight flute drills, wecan drill holes from a minimum of 2 mm to a maximum of 30 mm in diameter, for a length up to 4000 mm. With the BTA system we can drill holes from a minimum of 16 mm to a maximum of 200 mm in diameter, for a depth of 8000 mm.

We are a medium sized company from Slovenia and looking for partners to expand in the field of welding technology, piping construction.
If you are interested, we would like you
Gladly an offer for
Welder WIG 141
Welder MAG 135/136
Device according to ISO
Pipe fitter / locksmith submit.
If you need staff, contact us.

Our company specializes in tools for solid cold forming. We mainly supply screws manufacturers, furniture and automotive industries with CASE tools of hard metal.

An overview of our facilities.

Flat grind ·, clamping 300 x 600
Outside round grinding · D 290 x 500
Inside round grind ·, D 220 x 120 Depth unilaterally
Milling ·, X 200, Y 390 way
· CNC turning, D 190 x 500
· Erode, 2 D, X 290, Y 360 clamping
Profile grind ·, D 100 x 150
· Hardening furnace up to 1200 ° C
· Manual workstations for polishing surfaces

Furthermore, for years we work with reliable partners in the field
- Die sinking
- Coating (CVD, PVD)
- Special hardening process
together

As aluminum foundries we always work exactly to measure: The castings are manufactured in our foundry according to customer requirements as well as according to German quality standards. By working together with experienced partners, we cover the entire spectrum so that your castings can be processed without any problems. The cast aluminum parts we manufacture are used in many industries, including the automotive industry.

If your construction is to be implemented in aluminum, we are your real partner! We have our own tool shop and produce cast aluminum parts in small batches up to mass production. In addition, we also produce aluminum prototypes for your part development.

Thanks to the automation of our production, we are able to produce large quantities with consistently high quality.


Our services;
Small series up to large series or prototypes
Aluminum die casting
Aluminum sand casting
Tooling
Further processing of the castings
CNC milling
CNC turning
CNC drilling
Surface treatment (deburring, vibratory finishing, grinding, polishing, brushing, sandblasting, powder coating, painting
pack, repackage distribution logistics