Punching and cutting tools: realize better purchase prices

Odemar, the engineering works that stands out for craftmanship and finding innovative solutions. With an artisan’s eye for detail, but without losing sight of the overall picture. Odemar is an engineering works with over 50 years of experience in supplying various industries. The company’s dynamic engineering department focuses on the development of machines and systems for food as well as non-food industry. As a supplier and co-producer we are active in the following industries: Mechanical engineering, automotive, agricultural, food and leisure. "Short delivery times, specialism and flexibility”

The BKM precision tools, punching and bending parts GmbH was founded in 1977 and stands below with you: 1) Products: - Leaf Spring / keys springs - Connection, threaded and welded parts - Stamping and bending parts - Contact parts and springs, with or without rivet - Wire parts - Spring-loaded terminals and special bending springs - Coal guidance / mounting hardware (mounting small components.) 2) Dimensions: - Material thickness: Band 0.05 to 5 mm - Wire Ø 0.1 to 6 mm - Lengths up to 400 mm 3) Materials: - St-material - Carbon steel - Stainless steel (1.4310/1.4301) - Non-ferrous metal (bronze, brass, copper) - Special alloys 4) finishing: - Harden, even bainitic - Case hardened - Surface treatment (Vibratory grinding / polishing / start) - Galvanic surfaces 5) Industries: - Automotive - Electrical industry - Household appliances - Entertainment Electrical - Toys and Leisure Industry - Medical - Solar 6) departments / facilities: - Construction (development) - Tool (also prototype) - Presses with up to 125 tons. - Punching and bending machines up to 25 tons. (Bihler, Wafios) - Tempering - Trowalanlagen - Sorting by a camera system 7) Certifications: - Certified according to ISO 9001:2008 and QuH (Environment) - TS 16949 in preparation "All in one" is the motto of our house. Already on offer stage, we can provide valuable recommendations to product improvements or cost reductions by simplifying the design, appropriate material selection or tolerance definition you our years of experience. More than 100 competent and committed employees in management, engineering, tooling, manufacturing and quality assurance take care of the optimal realization of your wishes. Corporate objectives BKM has been successful for over 30 years in the field punching, bending and contact parts, leaf springs and wire form parts operate. Our business goals are * Customer Satisfaction * Motivated and satisfied employees * Latest Technology * Expansion of market shares and * Protecting the environment

We are a medium sized company with about 60 employees near Ingolstadt. The company Schermer has now been around 32 years. Our production focus lies in the production of precision parts (accuracy to 0.002 mm) for mechanical engineering, the aerospace industry and the automotive industry. In addition to high-precision individual parts and small series, we also manufacture complete equipment and tools. Our machining depth ranges from conventional turning / milling about the CNC-Drehen/CNC-Fräsen to grinding (flat, indoor and outdoor round, coordinates, etc.), wire EDM and waterjet cutting. Here, our range of materials from steel and stainless steel ranges over the non-ferrous metals, brass, red brass and copper up to the light metal such as aluminum and titanium. As a partner in our small group, we have a separate material including service providers, our sister company MVI (www.mvi-metall.de), which ensure rapid deployment of most raw materials and semi-finished products.Over a network, which we, together with our suppliers, we can offer our customers a wide range of heat treatment processes and surface coatings obtained from a single source. So we are as a supplier specializing in the most common heat treatment methods such as case hardening, nitriding and vacuum hardening. Our program offers among other things a complete machining in the field of manufacturing parts by: lathe parts, pistons, bushings, washers, rings, valve seat, coil, cone, spool, pipes, sleeves, shafts, axles, hubs, spool, spring plate, pin, roller, roller , bolts, screws nozzles, grinding mandrels, sizing, spindle, aperture, mandrels, lid, insert flange. In addition to our machining capabilities, we offer our customers even complete assemblies such as measuring devices, test equipment, gauges and mounting devices.

Sales agency working together with highly qualified producers from Europe and Asia in following technologies: - zinc/alu/magnesium diecasting - investment casting - cast iron/spheroidal cast iron - sand casting /permanent mold casting - alu extrusion - alu/steel forging - sheet metal processing /stamping - injection molding - turning + milling - sintering + MIM

In 1961, Hubert Bulach in Baden-Württemberg Gammertingen the company Hubert Bulach, arts and crafts metal goods. Over the years, the company was restructured to supply work in the stamping and welding area. A consequent expansion was then 1986, the own tool and die making. Meanwhile, the complete tube processing is possible. Flexibility, reliability and high quality are the hallmarks of our company in the field of sheet metal and tube machining and tool making. Punching - Bending - Pull On several eccentric presses and hydraulic, CNC-controlled punching and stamping press with die cushion, we manufacture parts according to drawings, samples or customer with a press capacity to 200 tons and a clamping area of 1000x1200 mm. Furthermore there is a controlled press brake for bending sheet metal parts up to 4mm thickness and 2000mm length. Further processing such as surface treatment, welding, riveting and assembly to the finished part, we like to take over for you. MIG - MAG & TIG For precise and high-quality welds, a welding robot is used. In addition, we have the possibility of producing welds on bends or angles bows with a controlled rotary welding table. Bolts and spot welding operations are also carried out at us. Rohrbiegetechnik After drawing, sample or customer specification, we turn your pipes up to diameter 42x2mm and a length of 4 m on a CNC controlled pipe bending machine. Further processing measures such as end form, punching or welding are also carried out by us. Toolmaking Tool designs in 2-D and 3-D area are created according to customer specifications, parts drawings or information from us. All popular file formats can be read. The connection of all machines to the CAD / CAM system allows for flexible and efficient manufacturing of tools. - Drawing tools - Follow-up and follow-on composite tools - Punching tools for inlays - Bending tools - Tensioning, welding and testing - Injection molds - Foam molds Wire and die-sinking EDM We erode for you from item to small series. Wire EDM Sinking EDM

PRECISE CNC MACHINING AND SINGLE/LOW SERIAL/PROTOTYPE/SPARE PART PRODUCTION IN SHORT DELIVERY TIME - EXPRESS POSSIBILITY FOR PART DEVELOPMENT IN SOLIDWORKS OR CATIA V5 WITH OUR DESIGNERS. DESIGN AND PRODUCTION OF INJECTION MOULDS AND PROGRESSIVE STAMPING TOOLS (max. dimension 2000 x 800 x 800 mm , up to 5 500 kgs EDM WIRE CUTTING + DIE SINKING + GRAPHIT ELECTRODE PRODUCTION 3D milling ( max dimension 1650 x 810 x 810 mm , max weight up to 1750 kg) MECHANICAL parts of high precision ( steel, tool steels , aluminium alloys, ampco, hardened materials , nitrided , coated ( TiAlN, TiN etc. ) Machining of exact mechanic parts made of HARDMETALL ( tungsten ) by means of electric discharge machining ( wire-cutting, sinkerrossion, grinding) Spare parts ( stamping tools , dies, active parts of forming machines and tools ( stamps, dies, inclusive coating TiCN, nitridation tec.)

In 1948 Moritz Kurt Juchheim founded the company M. K. Juchheim GmbH in Fulda, and started the production of high-quality glass and glass contact thermometers. The trade name JUMO is derived from the name of the founder (Juchheim, Moritz). The product spectrum was gradually expanded after 1950. In 1985 Bernhard Juchheim, son of the founder, took over general management. The mother company was renamed as JUMO GmbH & Co. KG in June 2003, to match the naming of the international subsidiaries. At the same time, Michael Juchheimwas appointed as C.E.O. with power of sole representation, as was his father, Bernhard. Now in the third generation of activity as a family-owned enterprise, JUMO has a staff of more than 2,200 employees throughout the group. It is very well established, with 5 subsidiaries in Germany, 24 foreign subsidiaries, and more than 40 agencies around the world. Today, the extensive product spectrum from JUMO covers components and system solutions for the measurement, control, recording and analysis of physical and chemical parameters. The products range from sensors for temperature, pressure and analytical measurement to the control and recording of measurement data. These instruments and systems are used in a very wide variety of sectors in the capital goods industries. The support of the two prefabrication divisions for metalworking and electronic modules provides the company with a fast, flexible response. And customers can acquire everything from a single source – from simple system modules to complex process software. JUMO does not restrict itself to offering standard items from large-scale production, but is always oriented to the needs and specifications of its customers. The company’s development department and the expertise of its employees facilitate individual customer solutions that meet the highest requirements for functionality, precision and easy-to-use operation. A global service network, consisting of 13 independent sites abroad with additional external service partners, ensures that JUMO is always close to the customer.

CZIOTEC - "Precision for better Quality" The CZIOTEC GmbH is a company with more than 100 employees. We are a recognized training company with about 20 training places. In diverse occupational groups we enable a successful entry into the professional life. We have been certified since 1997 according to DIN ISO 9001 and since 2012 welding to EN 1090-2. Our strength is the high level of vertical integration. We accompany the customer from the initial idea for a product to series production and beyond.

The DMT Product Development GmbH is an independent development partner for innovative product solutions. With a team interdisciplinary thinking employees are developed in addition to the core competencies of leading companies, medical, instrumentation and fuel cell systems, from the idea to the approved competitive product. On the basis of our sound know-how and process-neutral development, we assume a highly structured approach, the responsibility for the successful implementation. As a partner of successful companies, we take a holistic project management functions for complex mechatronic product development. Translation by Google Translate

Arzuffi srl in Bergamo (Italy) is an innovative, medium-sized family-run company in the business of precision punching and bending technology. We are a reliable, flexible and global partner for our customers. With state-of-the-art technology and motivated staff we offer nowadays parts starting from customer drawing and used in the automobile, electronics and electric industry, telecommunications, household technology and other industries. Toolmaking At the forefront of our toolmaking concepts is a high degree of maintainability, few downtimes, high process reliability and outstanding product quality. This is how we develop tools, always striving to adapt them to demanding requirements Production Punching-bending parts and Punch-rolled and bent parts The punching and bending parts produced in-house are made on high-performance, state-of-the-art punching machines and Bihler machines with automated peripherals. Thus even the high demands for quality can be implemented reliably and economically We are offering: - Sheet Metal Forming (Stamping, Deep-drawing) - Deep-drawing - ....

The Scholars Form GmbH offers the design and manufacture of thermoset, Thermoplastspritzgießwerkzeugen or Duroplastpresswerkzeugen well as tools for punching and forming

We are Slovenian engineering company in the field of mechanical engineering.We are present in various sectors of the industry across Europe (Austria, Germany, Switzerland and Netherland) Our advantage is that you as our customer have only one business partner who covers the entire EX-YU market for products. We also guarantee our clients a timely delivery and the quality. of your orders.

Maxfeld Stanzbiegetechnik GmbH manufacture punched and bent parts from steel strip and wire in our own design, production and tool-making facilities. As a full service provider, we offer you holistic solutions for your ideas, starting from expert advice, to the design and development work through to final production. Our product range extends from simple metal manufactures for toy producers, domestic goods and furniture industries to complex, precision parts and high-tech products for use in heavy engineering, the automobile industry and the electronics sector. To this end, we deploy machines from Bihler, Finzer, Mabu and Wafios and thus rely on cutting edge technology without compromises. We pay special attention in our work not only to precision and on-schedule completion of your quality specifications, but also to the use of the latest testing equipment. A team of committed, highly qualified staff in our design, tool-making, quality assurance and order processing departments are just as much the reasons for our success as the deployment of innovative technology.

What began in 1852 as a bolt forged in the heart of the Sauerland, today offers a range of more than 6,500 products. With our own numerous design and utility patents, as well as patterns provides GAH innovations since 1852! GAH is now a company with about 430 employees, which has five locations on three continents ist.In Germany, Europe and the world GAH has developed into the fourth generation of the successful and expanding Sytemanbieter for commerce, trade and industry. About 6,000 pan-European trading partners trust us every day.

We, the FEBU are a medium-sized company with 29 employees, and headquarters in the industrial area of Burbach – Würgendorf, plant road 19, with direct connection to the A45. The foundation of the company FEBU dates back to 1965. At that time the father of the current managing director Andreas Fey started with the production of punching, pressing and drawing tools, as well as with the production of windshield washers made of metal, in the rooms of his parents’ house. Due to the increasing demand, the constantly growing space requirements were initially met with the construction of a 150 m² production and storage hall in Burbach-Holzhausen in 1970. Due to the further steady growth of the company, the production and storage areas were moved to Burbach-Würgendorf in 1988, not least because of the favourable transport connections. Through expansions in recent years, a total of 5,350 m² of production and storage space is currently available. In the following years the product range was extended in all areas. Stamping technology With the founding of the company in 1965, the production of the first stampings for the company’s own windscreen washers and water slides began. In addition to the production of stampings for the company’s own products, other customers were quickly acquired and sales were continuously increased through constant investment in the latest machines. Thus, the most modern automatic punching machines and eccentric presses up to 200t pressure are available. For further processing, we have welding presses, automatic threading machines, as well as stud welding equipment and various special machines. Here a production can take place on tools manufactured by us or provided by you. Among steel (blank, galvanized + coated) and stainless steel we also process non-ferrous metals. Injection moulding technology With the decision of the current managing director Andreas Fey in 1993 to implement the production of plastic injection molded parts for the ice scrapers and windshield washers in house to be able to react faster and more flexibly to customer requests, he laid the foundation for the current 16 machines comprehensive injection molding production. After the purchase of the first injection moulding machine it did not take long until further articles from other areas were added and the first 2-component injection moulding machine was purchased, first for the production of the first own 2-component ice scraper, later also for further customer-specific articles. Gradually, the injection moulding production was expanded and finally, with the takeover of the company Schmidt Kunststofftechnik (founded in 1955) at the Biedenkopf-Eckelshausen location in April 2020, a second location was added. Toolmaking The in-house tool shop, with which the then founder of the company Horst Fey laid the foundation stone, is still the pillar of all production areas today. Thanks to our ultra-modern tool shop, we can react quickly and precisely to customer requirements and maintain our tools accordingly. Here we design and manufacture punching and injection moulding tools with a tool length of up to 2,000 mm, as well as fixtures and mountings for various machines. Cleaning equipment and ice scrapers The production of cleaning equipment includes the production of metal windscreen washers and water sliders, as well as the production of various plastic windscreen washers and ice scrapers. By investing in the most modern machines and developing our own products and tools, we are still able to produce competitively in this field. Since its foundation in 1965, FEBU has been able to establish itself throughout Europe. The export, also beyond the European borders, shows positive figures. Due to a manageable number of employees the company remains flexible and can react quickly to special customer requirements.

We from the model and mold construction J. Gördes produce since 1989 molds, devices, prototypes and foundry models on the highest level. Our aim is to provide our customers with the highest level of quality and dimensional accuracy in the form of our products in order to best support the customer processes. In this way, we create added value in the entire following production chain. In addition, we are available with our entire know-how for our customers and also bring us far beyond the actual mold making. From the very beginning, we understand our customer relationships as long-term partnerships in which we can develop together in order to achieve the greatest possible added value on both sides. The decisive factors for customer satisfaction are essentially the following aspects: • Documented dimensional accuracy • Production quality • Handling in the manufacturing process of the customers • Fast and competent advice and order processing • On-time delivery All employees are involved in the continuous improvement process to achieve the highest possible quality standards, and this ensures day after day that all the knowledge and experience contribute to the sustainable development of our products. In addition to our customers and employees, our suppliers are also part of the quality philosophy. Through long-term cooperation and continuous exchange of experience with them, we ensure consistently high quality and further development of our products. Likewise, we keep up to date with the latest technology through lively exchange with innovative suppliers. With this quality policy we pursue the following goals: • a high level of customer satisfaction in terms of the quality of our services and products. • the lasting assurance of high quality at all stages of the work process through careful planning, preparation and implementation of all necessary actions • the consistent application of preventive quality assurance measures to minimize or avoid the occurrence of errors. • securing the organizational conditions to ensure smooth and close cooperation of all employees of the company permanently. • Compliance with all customer requirements and legal obligations Our quality management is defined in a handbook and corresponding applicable documents and thus binding for all employees of the company.

Deformation of cold rolled strips with press: In the field of classical stamping production is possible on eccentric presses from 40 to 250 tons, as well as hydraulic presses up to 250 tons. The product size ranges up to about 500 mm in length and 4 mm in thickness. Fine blanking: Fine blanking is a special technology or so-called punching "without air" between the Schneidematrize and the knives (0,5 - 1,0%). This method is especially useful for highly sophisticated products in question, which are dentate different. The maximum length is about 500 mm, and the maximum width of 6 mm. This allows the tolerance of + / - 0.01 mm, a uniformity of the cut edge and the clipping with minimal needle on the edge. Drawing and deep drawing: Deep drawing is a mode of production, with the preparing various hollow shapes such as rivets, drawing dies, industrial electric parts and the like. The diameter ratio to the length is up to 1:2.5. Of course, these products have a smaller extent, forExample up to 20 mm. Screws: TKG doo manufactures screws of the small range in diameter from 2 to 6 mm and using the most advanced technology of cold deformation, which has displaced pivot screws in the world due to their cost-effectiveness. TKG provides doo screws forth in accordance with the ISO and DIN standards. We also produce special screws design according to the plans and patterns in collaboration with technologists and designers of customers. Screws can be thermally edit and galvanically protect, depending on the location and type of operation.