TINTEC Metal Technology is a certified welding specialist [DIN 3834-2, ISO 9001 iV] for holistic, sophisticated technology and complex welding sheet metal assemblies in steel, stainless steel and aluminum. We specialize in sheet metal fabrication for housing, container & industrial equipment, tanks & tanks, ducts & pipes / flanges and allocations, as a complete assembly with in-house development and design as well as our own production.

Production chain with complete sheet metal technology from cutting (laser cutting, punching, shearing, burning) on the deformation (edges, bending, forming, rolling, rounding) with core expertise joining (GMAW, TIG welding, soldering, bonding) to the surface (grinding, brushing, galvanizing, paint / powder).

Massive steel construction welding assemblies & to 6 tons with welding qualification according to DIN EN 1090-2 EXC 3

Complete production from one source from prototypes & item to small - medium batch & high quality craftsmanship at a reasonable price level with expert advice and customer care.

The company was founded in 2006 with 10 employees is dynamically grown into a SME with now 45 qualified employees - from trainees on skilled workers, foremen and technicians to welding specialist and Welding Engineer. Currently, about 3,000 square meters of production area with stainless steel / mild steel separation and 15 integrated welding workstations for manual and semi-automatic MIG / MAG & TIG welding.

(& Conveying equipment Food - - & Beverage, tobacco processing, filling,), air - space, ship, - & yacht building, vehicle and machinery - equipment - Regional and nationwide are demanding customers in the food industry & Apparatus reliably and continuously served.

Deformation of cold rolled strips with press:
In the field of classical stamping production is possible on eccentric presses from 40 to 250 tons, as well as hydraulic presses up to 250 tons. The product size ranges up to about 500 mm in length and 4 mm in thickness.

Fine blanking:
Fine blanking is a special technology or so-called punching "without air" between the Schneidematrize and the knives (0,5 - 1,0%). This method is especially useful for highly sophisticated products in question, which are dentate different. The maximum length is about 500 mm, and the maximum width of 6 mm. This allows the tolerance of + / - 0.01 mm, a uniformity of the cut edge and the clipping with minimal needle on the edge.

Drawing and deep drawing:
Deep drawing is a mode of production, with the preparing various hollow shapes such as rivets, drawing dies, industrial electric parts and the like. The diameter ratio to the length is up to 1:2.5. Of course, these products have a smaller extent, forExample up to 20 mm.

Screws:
TKG doo manufactures screws of the small range in diameter from 2 to 6 mm and using the most advanced technology of cold deformation, which has displaced pivot screws in the world due to their cost-effectiveness.

TKG provides doo screws forth in accordance with the ISO and DIN standards. We also produce special screws design according to the plans and patterns in collaboration with technologists and designers of customers. Screws can be thermally edit and galvanically protect, depending on the location and type of operation.

tmp-machining is a young, flexible and very committed company with the aim of meeting or even exceeding your customer requirements. The focus here is on the quality and timely processing of your orders. The short communication channels and the associated fast response times are among our core competencies.

Our Company's History and Development

Tometh KFT was founded in 1997 as the successor to a sole proprietorship that had been operating for five years, with the aim of providing high-tech solutions for the engineering industry, prioritizing customer needs. Over the years, we have continuously expanded our workforce and machine park. Today, we operate more than 20 modern, computer-controlled production equipment, and our team has grown to 52 employees.

We have been operating our ISO 9001 quality management system since 2002, which is now fully integrated into our in-house developed production management system, supporting quality-focused manufacturing. In addition, in 2019, we implemented the ISO 14001:2015 environmental management system, reaffirming our commitment to sustainability and environmental responsibility.

We utilize a modern enterprise management and MES system in production, and we have been operating paperlessly for nearly 12 years, with a strong emphasis on digital systems for data collection and statistical analysis. Our goal is to achieve robotic machine servicing for medium-batch production (1-500 units) and to implement robotic shop floor logistics. We already have operational divisions in this area, supporting efficient and innovative production.

Through technological developments, we have also established the conditions for manufacturing and assembling assembled units. Currently, we produce 50-100 different assembled units and over 1,000 types of parts, regularly serving about 20 clients.

In recent years, small-batch assembled unit production has opened up a new, strategic field for us. We use our CAD-CAM systems not only to support our own manufacturing processes but also to provide design and prototype manufacturing services for our clients. Our goal is to offer long-term, value-added partnerships to our customers through our modern technological expertise, contributing to their competitiveness and success.

Torneria Montesi has been operating since 1964 as a trusted partner in the subcontracting of mechanical components in numerous industrial sectors. We are a company that produces custom-made components and standard products for our catalog using mechanical turning and rolling processes.

The surface is organized on two production divisions in which the machine tools dedicated to turning and rolled threading are coordinated. To support there are two logistic units dedicated to the warehouse and distribution. Safe, organized and controlled environments reflect their own order on the work of collaborators, guaranteeing precision and punctuality.

We are specialized in proposing innovative techniques and appropriate solutions for the creation of each single component.

Our strength:

The synergy between technological areas: turning and cold forming are in close contact to integrate into the efficiency of production but also to become complementary to each other in the production challenges of qualitative excellence.

The synergy between production logics: custom-made products made to design with lean and kanban philosophy intersect with standardized products stored in the warehouse and offered for industrial distribution.

The synergy between product logics: customized products inspire evolutions and improvements of our standard products.

Synergy with customers and suppliers: from our customers we look for challenges that can allow us to grow, from our suppliers we obtain increasingly targeted solutions.

The synergy between our people: we all have room for improvement and the first opportunity to obtain it is the sharing and comparison of knowledge within us.

The TRICO AG - A small business, which is characterized by quality and flexibility. For Präzisionsdrehteile of all kinds, the TRICO AG is the right partner.
We process various materials of up to Ø1.0mm Ø34.0mm.

WEBOTECH is a manufacturer of precision turned parts with nearly 100 years of experience in the market. As one of the first manufacturers of turned parts worldwide we are certified according to ISO TS 16949. Our expertise in machining, so the quality of our employees and our machinery, you can safely assume. For our references and the development of speaking, particularly in recent years.
In the procurement of turned parts reliability is one of the most important criteria.
It meets us again and again with pride when we classify renowned companies from all over Europe as preferential or A-supplier.
We at Webotech have the know-how for even the trickiest cutting task. We have the experts in the essential processing techniques.
We are constantly with our machinery to the prior art.
We work with future-oriented forms of organization.
Why Choose Us:
- Pooling of expertise, manpower and equipment from various fields
- Continue to bring design departments and value analysis teams with new ideas
- Complete production program from the standard part according to your documents by developed together with you special section for extreme operating conditions
- Complete in-house production of components
- High investment in premises, machinery, automation, internal training and development
- Modern management structures
Billions of turned parts from our company have found their way into almost every industry. This speaks to our experience. This speaks for the quality of our products.

Stamping dies, presses and press automation :feeders,manipulators,destackers,transfers for presses and press feeding lines - thread rolling machines - plate bending rolls - coil processing lines - press dies: transfer dies and progressive dies for automotive and household appliances

U. Eitner
Tooling, EDM & Plastic GmbH
Benzstr. 7 D-64807 Dieburg

Ask us!
For over 25 years we have manufactured to approximately 1500m ² and bearings on 1000m ²

Tool and die
All equipment needed for tool available eg Senk - and
Wire EDM.
Max 3T tool Total weight approx 25 Tools / year

Engineering and CNC machining
4 CNC lathes and machining centers 4
Milling: Max X1800 - Y750 - Z750, 3, 4 and 5 axes.
Rotate: Max diameter 800mm

Plastic injection molding
10 Arburg injection molding machines, max. 150T, fully automated.
Automotive, electrical and thermal engineering
about 30 million plastic parts parts per year.

The company UKM Vehicle Parts GmbH has specialized in the production of precision parts with a high technological content. Through our years of experience we have established ourselves as a reliable partner. Our customers are automobile manufacturers or reputable suppliers in the automotive industry.

We manufacture large and small series according to drawings or samples with single-spindle automatic lathes from the manufacturer Traub (A15, A20, A25) and Index (25, C29, B60), as well as special designs with eye-hand coordination.

Our repertoire includes the production of short turned parts in a wide range of metallic round materials, such as free cutting steel, brass, VA, aluminum, gunmetal, etc. in the area of
ø 3mm to ø 60mm and a length of up to 190mm - and this at competitive prices.