Magnetic Media Mechanics Ltd. was founded on the 9th of October 2000, as an independent company on the territory of former big factory “Magnetic Media” Co."

It is situated near the motorway, in Dragor, municipality of Pazardzhik. The company is 108 km away from Sofia and 35 km away from Plovdiv.

MM Mechanics Ltd. is situated on 8 000 square meters all-out area and has its own buildings, machines and equipment.

The company is specialized in mechanical processing of aluminum and steel parts, production of varied tools for flooring, all kinds of galvanic coatings and powder coatings.

MM Mechanics Ltd. also produces different kinds of assemblies, as well as non-standard machines for varied processing and current repairs.

MM Group

- Production of tooling – press forms, molding forms , punching tools, tools for forging
- Aluminum die casting under pressure – with machines from 200t to 650 t.
- Alloying of aluminum and zinc alloys
- All Types of machining
- Galvanic coatings – bright and chemical, manganese and zinc coating, chromium plating,
- Molding of plastic parts
- All types of heat treatment, cementation
- Powder and liquid spray coating
- Manufacturing of joint bolts, tips and rods for cars
- Production of tools for floor covering
- Assembling line of meetings and products
- Milling and turning (CNC machines)
- Stamping, Deep drawing, Forging
- Grinding, Heat Treatment, Welding

ALL FROM ONE HAND
You are looking for the complete production from a single source?

Put on the right partner, because it gives you the necessary freedom for your core business.

Send us your drawings, we will organize the rest. We procure the material, edit the parts, ensure the coating and monitor the entire production process, until you can use the pre-finished workpiece on time available.

Axentic d.o.o. (u Bosnia. Herzegovina) with headquarters in Gradiška has specialized as a supplier of high-quality production parts. With years of experience in machine and plant engineering we were able to establish very good in the domestic and European market.

Our strengths are high quality associated with punctuality, expertise on our part as well as those of our contractors.

With this basis, we are happy to solve your challenges!


OUR EXPERTISE

We place our focus on products that we have been perfecting.
In order to offer our customers perfect products, we focus on the following areas of expertise:


• Milling parts

• Turned parts

• weldments



Especially in the mechanical engineering, plant engineering, transmission engineering, railway and transport technology, renewable energy and medical customers appreciate our expertise, as well as the perfectly manufactured

Milling parts:

Amounts:
Small, medium and large series
Dimension:
Max. 500 x 1200 mm

Material:
Steel, stainless steel, nonferrous metals, plastics

Surface Treatment
possible in cooperation with long-standing and reliable partners

Turned parts:

Amounts:
Small, medium and large series

Dimension:
Conventional machining: max. D = 220mm

Material:
Steel, stainless steel, nonferrous metals, plastics

Surface treatment:
possible in cooperation with long-standing and reliable partners

Welding:

Amounts:
Small series

Weight:
Max. 3000 kg

Material:
Steel, stainless steel

Welding Types:
After method E111, TIG / 141, MIG / 131, MAG135 / 136
Welders have valid certificates in accordance with EN 287/1

Surface treatment:
possible in cooperation with long-standing and reliable partners.

Surface treatment:

Anodizing
Chroming
Blacking
Painting
Galvanizing

Heat Treatment:

Gas nitriding
Vacuum hardening
are also available on request


Quality Responsibility


"The customer comes back, not the product"

So just clear and accurately is our internal motto.

Achieving this does not succeed by means of regulations, but only by really motivated and well trained staff. So is the ultimate goal for us to provide a secure future for employees and company. We intend to achieve by gentle and steady growth of the company and by absolute customer satisfaction.


Challenge us with your requests!

Baldim Federn was founded in 2000 with the aim of producing and exporting compression springs worldwide.
In the following years, the demand for technical springs has steadily increased and the management of Baldim Federn faced this growth with a new building, which, on an area of over 2,000 square meters, is now equipped with new machines from leading international manufacturers and more than 70 qualified employees, so that the company's motto “Quality is our trademark” can be met.
The focus is constantly on adding new, modern machines to the machinery in order to be able to maintain European standards.

BALSTER, s.r.o. is a company active in the global area of engineering production, we offer you:

= Casting:
- hand moulding (sand casting)
- machine moulding (sand casting)
- continuous casting
- gravity die casting
- investment casting
- low-pressure casting
- modelmaking
= Sheet Metal Processing:
- bending / folding
- laser cutting 2D, 3D
- punching / pressing (Out-of-tool)
= Welding:
- MIG/MAG, TIG
- manual electrode welding
- robot welding
- spot welding
= Welded constructions / Structural Steelwork:
- machine frames / bases / racks
- welded constructions (weldments)
= Pipe & Tube Manufacturing:
- pipe bending
- pipe forming
= Turning
= Milling
= Drilling / threading / tapping
= Surface Treatment:
- powder coating
- wet coating
- sand blasting
- spray-painting
- annealing
- hardening
- induction hardening

We provide our customers with professional global services from the drawing to the delivery, including the quality control, packing and the transportation of the finished products.

We are a German-Croatian company which is manufacturer of storage and transport facilities.
Welding, turning, milling, lacquering and sheet metal processing and Saws are our daily tasks.
We are highly adaptable in and specialist in Stahlsonderbau.
Our ansa vinegars in Duetschland and Croatia manufacturing sites are certified and Hochqualfiziert.
We also can recommend them for development of their products and services, our well qualified technical office.
We look forward to our Zusammnearbeit.

MFG Conjar (Geschaeftsfuehrung Croatia)

BAUR METAL TECHNOLOGY is a medium-sized family, the ever-located since 1980 in the expansion. The company founder Manfred Baur stood at the beginning two employees to the side.
Due to the development of the company moved in 1997 from Weissach im Tal-break after Unteraspach, the original 250 m2 production area were tripled in a new building. In several stages, the production area was expanded to today 2000 m2. The current MB-team of 10 employees leads customer orders still just as promptly and flexibly through, like 20 years ago.

The metal is still the core business of Markus Baur. By investing in machinery that Leistungssprektrum is constantly being expanded.

Products:
We produce samples of parts, small-medium series in the area turning milling drilling, turn (10 mm to 80 mm and a length of 650 mm), mill (10 mm to 1 560 mm, width 10 mm to 750 mm, height 2 mm to 750 mm Speed ���up to 10 000 1/min).
The production of steel, aluminum and V2A modules on our 3D welding hole table length 50 mm x width 50 mm height 50 mm, up to 2500 mm wide x 2500 mm high x 12 500 mm long, with partial machining CNC and lacquering in our paint shop ev mounting.

We can weld steel, aluminum andn V2A TIG, MAG welding workshop DIN 18800 part 7, our authorization for the production of oil-bottom trays according to WHG § 19I is up to date

Steel sheet blanks of 1.5 mm to 10 mm (to a length of 3000 mm / V2A 1.5 mm to 6.0 mm to 3000 mm.)

Our paint shop was extended and modernized in 2008, the painting of small parts (width 100 mm x High 100 mm x length 100 mm) and machine components, cabinets, furniture, truck vintage cars, trucks, containers, machinery, etc. is available with different coating processes possible, eg : spray gun, Ayrlis high and low pressure possible (Dimensions: Width 4000 mm Height 3700 mm Length 12 500 mm).

We manufacture special-tow bars for cars and trucks with TÜV certificate seit1998. - Gantry crane up to 4.5 T, forklifts from 1.5 to 6.0 tons. -
At the programming station DXF files can be edited.


Everything in one hand

Planning & Construction
Advice
Production
Delivery
Assembly
Customer Care

Our production is located in Croatia and partially in Bosnia and Herzegovina.
- Laser metal cutting, bending, metal stamping, welding, grinding, galvanizing, and powder coating all in one place.

We have a team of innovative mechanical engineers who are not only capable of producing your product, but also developing new products according to your needs and individual desires. Thanks to our expertise and experience, we are always ready to offer new and creative products for Your business.

Our team has over 20 years of experience in processing all types of metals. Our production expertise has set standards in the industry, leading to long-term relationships with numerous business partners in Germany (such as EACC, Hurter, Haußler, Sana Klinik, etc.) and the rest of Europe.

If you need support in developing an idea, drawings , or sample production, feel free to contact us.

Equipment in our production includes:

1. Bodor 3kw Laser 2019
2. Bodor 6kw Laser 2022
Cutting:
-Steel 20mm
-Stainless steel 10mm
-Aluminum 10mm

3. Euromac Punchmachine
Cutting thickness 2mm

3. Vimercati press brake 3000mm 80 tons
4. Durma press brake 2000mm 60 tons
4. Mig/mag welding for steel and aluminum
5. Tig welding for steel, aluminum and stainless steel
6. Spot welding for steel and stainless steel (not for aluminum)
7. Sheet cutting machine for thickness up to 5mm
8. Powder coating ITW Gema
9. 2x Eccentric presses 30 tons
10. 2x Hydraulic press 25 tons

Belia srl has stood for the highest quality for over twenty years.

In order to achieve this quality, Belia srl provides the customer with team and machinery. Highly motivated and driven by innovation, always state-of-the-art in terms of production technology.
Belia srl knows and anticipates the needs of the markets. National and international. We meet all of your designs with a wide range of knowledge and the necessary tools. This enables us to manufacture all types of components. Our success is based on this.

The diversity and complexity of production, the growth of the company and the constant investment in new technologies speak for themselves. Continuity as the basis for top quality!


The machine park of our folding and bending department consists of CNC-controlled 7-axis folding and bending machines with a working length of up to 4 meters. This enables us to manufacture even complex shapes and radius edges for numerous industrial applications.Our bending profiles guarantee optimized series production of your designs.
The department was recently expanded to include a semi-automatic swivel bending center. Always up to date, Belia srl started with the Kaizen principle in order to keep the efficiency and programming under control and to keep the customer punctual and on time.

Our German colleague Mr. Wolfgang Ralf Dorenkamp is of course available to you 24 hours a day for all requirements and technical advice. A fully automatic Wise and Astes sorting system ensures that many of Belia srl's customers run smoothly.

Paint shop, wiring harness installation and assembly Your machines are in the right hands with us!

Iron Foundry
GJL and GJS
BENODUR
ADI
SiMo
Hand and machine moldings

Leistungsfähiges Unternehmen des Fahrzeug-und Behälterbaus.

Fertigungsstätte seit über 14 Jahren in Polen

Mitarbeiterzahl: 50

Komplette Auftragsabwicklung über unser Büro in Deutschland

Durch unsere eigene Fertigung in Polen entfällt für unsere Kunden die oft sehr aufwändige Lieferantensuche-und betreuung im osteuropäischen Raum.

Pofitieren auch Sie von unseren langjährigen Erfahrungen vor Ort!