NTEC is a partner and supplier for tool making company in the field of plastic, pressing and casting technique.

The NTEC GmbH offers, in addition to the most common standard parts for mold making, an extensive range of precision flat and tool steels. Let the quality of our advice and our service convince and challenge us.

In our workshop, we manufacture fine cutting tools since 1985. Our affordable products of excellent quality can be used for each type of material you want to process. We also undertake repairs to existing tools.

Our expertise enables us to meet even the most specific requirements for special cutting tools which are not commercially available, allowing you to save time and money.

In our workshop, you will find all kinds of machining constructions as well as grinding surfaces and cylindrical.

With over 30 years of experience, we continue to innovate in manufacturing and shaping of cutting tools.

Following up step by step the technological evolution, we have four AKIRA SEIKI vertical machining centres -a five-axis (4 + 1) and three three-axis, as well as a three-axis CNC lathe. We use CAM/CAD NX UNIGRAPHICS SIEMENS to design and program. For the quality control, we use a CMM of Tesa.

The combination of technological knowledge and modern equipment allows us to meet the needs for quality products and reasonable costs, both in cutting tools manufacture and general machining.

We use high quality materials accompanied with all the necessary certificates, whenever needed.

We are a manufacturer of precision mechanical parts.
Our machinery is made up of NC lathes, mills with 4th and 5th axes, NC grinding, EDM machines,
laser marking.
We design special equipment for clamping parts in the construction of gears.

As a specialized company we have been successful for over 30 years in the machining of turned and milled parts from various materials in the diameter range up to 420 mm working.

With 30 experienced and knowledgeable staff, we provide in Nellingen forth to the Swabian Alb precision components for the drive technology as well as for machine and vehicle construction.

Our focus is in the manufacture of complex parts up to series production. For us there is a modern CNC machine park with lathes, milling machines and turning / milling machining centers available and guarantees the highest quality standards.

Translation by Google Translate

We are a company with over 20 years of experience in the supply of custom mechanical components.(specialized in supplying custom mechanical components with over 20 years of experience.) We take care of your supply needs from the moment we receive your request for quotation until the shipment from our warehouse.

Once your request for an offer has been received, we take care of:
1) Identify the most suitable technology to reduce costs and create complex parts
2) Dialogue with suitable and economically competitive suppliers
3) Let us introduce you to our best offer

Once your purchase order has been received, we take care of:
4) Follow the sampling and certification phase of the product
5) Manage production advances in accordance with the required timelines

When the goods arrive at our warehouse, we will take care of:
6) Perform a statistical check in acceptance
7) Pack and ship the goods according to your needs
8) Manage reorder quantities from a Kanban perspective

We can provide finished items that require multiple processes such as:

> Heat treatments
> Surface treatments
> Additional processing (e.g.: assembly, shooting, rectification, etc.)

We are able to offer this service thanks to our mechanical and procurement skills, to our structure in northeastern Italy and to a network of production partners present in Italy and Asia.

We are fluent in Italian, German and English. Contact us to learn about our team, our technologies and our prices.

Oerlikon Barmag is the world market leader in the manufacture of spinning systems for man-made fibers such as nylon, polyester and polypropylene, as well as texturing machines. In addition to plant design and system design and production, the core competencies also include the manufacture of the associated components such as winding heads, pumps and godets. At the headquarters in Remscheid, Germany, over 100 engineers and technicians develop innovative and technologically leading products for the world of tomorrow.

The "Officina Meccanica Gualco" has been working in the metal industry for 40 years and is specialized in
Turning, Milling, Threading, Broaching and Wire-EDM.
These areas are supported by a technical office equipped with CAD-CAM stations for design and calculation of
tool paths sent to the machinery.
With experience gained over decades of activity, we are able to manage the processing and production of a wide
range of mechanical components from 10 mm to 450 mm in diameter, with lengths up to 1200 mm.
We work in stainless steel, all the 300 and 400 series, and other types of materials such as: Alloy steel, Aluminum
and its alloys, Copper, Brass and bronze, Plastic, Super alloys and cast iron.
Quality control is the primary strategic objective of the production process and guarantees requirements met for
each product component.
Each step of the quality control process is verified by the instruments most suitable for a particular control.
Among our measuring equipment, we count a portable arm CMMs which is an accurate gauge. This tool allows
us to optimize the processes of control and dimensional analysis processes and moreover gives us the
opportunity to compare the opportunity to compare the products with the related technical drawing.
To provide the best service we follow the details of all manufacturing and production processes, from raw
material to finished product, taking advantage of partner companies to perform operations such as surface and
heat treatment, grinding and painting.
Our philosophy is expressed through passion for our work, innovation and reliability.
Customer satisfaction, the addition of support and ancillary services, and analysis and solution of problems set
us apart from other competitors in the market.
On the basis of the policy pursued, we have achieved ambitious goals, among our references it is a prestigious
factor to mention the Politecnico of Milan besides important names of Made in Italy for the chemical,
electromechanical, packaging, furnishing, health care, Industrial handling, oil & gas, motorcycle and
Shipbuilding.
We invite you to visit our web site to learn more about our company.
Thank you for your attention, we are waiting for your interest in this.
Team Officine Gualco
Mario, Licia, Werner and William

Our company has been operating since 1937 in the industrial sector as AUTOMATIC TURNING COMPANY engaged in the manufacture of precision small metal parts to customer design for the mechanical industry, in particular automotive, hydraulic and pneumatic components, as well as the production of a wide range of bearings ball to customer's drawing.
The operating department is equipped with multi-spindle automatic lathes, mechanical and servo-controlled with CNC, which allow to execute special parts, with diameters and hexagons ranging from 3 to 70 mm, which can be finished
with heat treatment and GRINDING.
We also produce a wide range of special low-speed ball bearings.

“OIL AND GAS EQUIPMENT PLANT” LLC is engaged in the development and production of a wide range of equipment for the oil and gas production and refining industry, metallurgy, energy.
The enterprise management system is certified according to ISO 9001: 2015, ISO 14000, OHSAS 18001 (ISO 45001).
We would like to offer your company cooperation in the machining of metals.
Below you can see other types of work that we perform:
1. Turning (equipment: ST25, ST40HE, ST45 with the option "big bore", 1740RF3, 16B16T1, 1V340F30, 1510, 1531M, 1M63, 1A64, 1M65, 16K20, 16K40)
linear dimensions from 10 mm to 3000 mm, diameter from 10 mm to 1250 mm
2. Milling (equipment: VF3YT with rotary table HRT310, EC1600YZT four-coordinate FP17M, Heckert FSS-315, 6P83, 6T13)
linear dimensions from 10 mm to 16000 mm, diameter from 10 mm to 700 mm
3. Boring and coordinate boring (equipment: 2A622 with upgraded digital display 2A614, 2V440A) the sizes of a working zone are 1120х1250 mm
4. Drilling (equipment: 2C132, VO-63, 2532L)
the sizes of a working zone are 1100х2300 mm
5. Grinding (equipment: ZA164, 3M132V, 3M153, 3L722A, 3D711V, HSH83A, 3K228)
round grinding: linear dimensions from 10 mm to 2000 mm, diameter from 10 mm to 400 mm
flat grinding:: the size of the working area 1250x320x400 mm
internal grinding: linear size up to 1200 mm, hole diameter from 40 mm to 400 mm
6. Heat treatment of details according to drawings of the customer or the technical task.

Our sales department and service department are also available to quickly answer all your requests.
Please give us the way where we can contact on the issue of cooperation

Our company was born in January 1986 under the name of MECBAR Snc
Founder Teodoro Bartolini, who after over fifteen years of experience in the field
Of mechanics, as an entrepreneur, decides to collaborate with his children.
The intention is to specialize in the construction of precision equipment for multiple fields
Of application, today has been achieved thanks to a gradual development in the no time
Never overlook the quality standard that has always characterized us.
The equipment of our production is built entirely within
Our company using our ever-updating machinery under the look
Technological development and this constant development has allowed us to specialize in the machining
Milling of hardened materials also over 62 HRC of hardness, in machining of
Drilling, threading and milling of hard metal, also over 1600 Vickers, with mole and
Polycrystalline diamond cutters and also tempered and non-tempered materials, with
Dimensional and geometric precisions less than 0.005 mm obtaining a degree of finishing
With a Ra of between 0.3-0.7.