Refrigeration Equipment Factory PZL – Dębica S.A. has been active on the market since 1938.
The speciality of the company is industrial refrigeration equipment.

The production offer WUCH PZL - Dębica S.A. includes:
 compressor sets based on screw compressors as well as single and two-stage piston
compressors
 units for ice water and chillers
 air and liquid coolers
 spray-and-evaporative condensers, vertical and horizontal shell-and-tube condensers
 tank apparatus: liquid separators, horizontal tanks, inter-stage coolers, economisers, oil
separators, dryers
 refrigerating valves: cut-off, non-return, control, three-way, safety and pressure gauge ones
as well as level gauges, filters and breathers
 cooling and refrigeration tunnels for fruit, vegetables and poultry
 refrigerating systems, cold stores and complete refrigeration plants
 cooling equipment for mining industry

In the production offer, there is also:
 equipment for LPG gas: compressor units, valves, filters.

In addition to manufacture of equipment, the company also provides production services.
The full scope of offered services includes: making of steel structures and machine parts, machining, welding and gas cutting, plastic working and heat treatment.

The offered equipment is designed for:
 food processing, among other things industries of meat, poultry, dairy, brewing, fruit and
vegetables
 chemical industry
 plastics processing
 shipbuilding
 mining

Equipment manufactured by WUCH PZL - Dębica S.A. is working in a number of enterprises in Poland and abroad.

The kind of run activities covers:
technical counselling, designing, production, assembly of refrigerating systems, guarantee and post-guarantee service, overhauls and modernisation of used refrigerating systems, refrigeration training courses for customers and users of industrial refrigerating equipment.

WUCH PZL - Dębica S.A. employs highly specialised technical staff and implements new technologies, thanks to that it guarantees the high quality of manufactured equipment and services.
Many years of experience, co-operation with research centres, own design and construction offices as well as extensive technology and production back up facilities make it possible to manufacture products of the highest standard. Since 1998 the company has had the ISO 9001 quality certificate. Since 2005 the System of Quality Management has been certified for the compliance with the EU pressure directive. The equipment delivered on the market meets requirements of European Union directives and is marked with the CE mark.

Our electronic and mechanical production are to be employed in a position for you in the area of system construction.
We assemble your PCBs, assemble and test your Baugrupppen and devices. We mill and turn your parts.

We are a young small business and do what we do best. Processing of the raw material into the desired shape.
Enjoy contemporary infrastructure, experience and good partnerships enable us to provide a rapid turnaround time of their product with the required quality of them.
In addition, we are active in the development, manufacture and distribution of motorcycle accessories.


Core competence

Our strength lies in the machining of cubic workpieces made of various materials.
We manufacture prototypes, individual parts and small series. From very simple workpieces up to complex components.

• CNC Milling
• 3D milling from CAM
• Hard-milling

• NC turning
• Conventional turning

• Surface grinding

Flexibility

The small size of the company we use to our advantage. The internal information goes through a few heads. In this way we guarantee short delivery times and can respond to customer needs faster.

When it comes to the manufacture of precision components and assemblies for industry and medical technology, then we see ourselves as an allrounder.

mbb was founded in 1995 and offers its customers in the areas of turning, milling, wire EDM, gun drilling, honing, and assembly of components.

Made is mainly used in medium and small lot sizes.

Additional services such as surface treatments, curing or grinding are offered in cooperation with our partner companies.

mbb stands for fast, flexible and cost to the customer, and flawless execution.

The quality of our work, we ensure in the context of the standards EN ISO 9001:2008 and EN ISO 13485:2003.

See for yourself!

We look forward to your inquiries.


Gerhard Berger sheet (GF)
Johann Giesshammer (GF)
Josef Strings (BL)

Special part production according to technical drawings as turning and milling parts. Diameter from 6 to 550 mm, lengths
up to 500 mm. Milling parts up to 1000x500 mm. Surface treatments of all kinds possible, grinding work
in-house with about 7 grinders. Manufacturing groups: shafts, bolts, gears and all matching parts. Almost all materials are possible.

40% of the production is for the European countries, 10% for the Arab and African countries. ISO 9001 is available.

We are manufacturing metal injection moulds, aluminium-zinc pressured die casting (10 g to 3.000 g) and machining since 1986. We're exporting our products to Germany and Switzerland since 15 years.
Yılmazer Metal supplier of the Mercedes-Benz Trucks and Buses in Turkey since 1988.

York Mechanical Engineering e. K. has specialised in the areas of special mechanical engineering, device construction, tool construction, individual part manufacturing and CAD/CAM manufacturing. From the simple instep device or SPS steered equipment installation up to complete solutions in the tool construction we offer customers an extensive know-how.
Since the company is foundation in 2000 we work for famous enterprises in the food, packaging, glass, mechanical engineering, rubber, synthetics company´s industry.

Our services include

Sample and prototype construction
Welding devices
Cutting and stamping devices
Devices for coating of car body pars
Devices for the treatment and gluing
Cutting knives and cutting materices
Umformwerkzeuge, Biegewerkzeuge and subsequent group tools
Prototype construction
Project planning
Construction
Trick and Frästeile
Zero manufacturing, individual manufacture and serial production
Partial arrangement about call of delivery
Plastic parts
Sample construction and serial production

Whether 3D-milling, Formfräsen, Hartfräsen, Gewindefräsen, CNC-Fräsen, to CNC tricks, hard tricks, Drahterodieren, Senkerodieren, data takeover 3D-to systems CAD/CAM, level loops, top loose loops, round loops, WIG MIG LIKES welding, - we have the right equipment.

Almost all materials are used:
High-grade steel (1.4021, 1.4028, 1.4029, 1.4105, 1.4301, 1.4305, 1.4307, 1.4401, 1.4404, 1.4435, 1.4571), steel (16MnCr5, 42CrMo4, C40, C45, FE510 (S355JR), FE360 (S235JR), 39NiCrMo3, 18NiCrMo5), machine steel, Duplex steel 1.4462, aluminium, bronze, plastic (POM, PVC, PTFE, PEEK).

After a mechanical treatment the following ist possible: Caseharden, Induktionshärten, Vakuumhärten, Ölhärten, as well as in the area of the wide treatment and surface treatment washing, degreasing, to site foremen, electric site foremen, deburring, loops, Gleitschleifen, sandblasting, Phosphatieren, Brünieren, galvanising, nickel-plating, chromium-plating, Hartverchromen, anodizing and Passivieren and next hard treatment.

Specialized professionals and a strict quality control allow us to comply with the highest standards and to offer a puncutal and precise service.

We are successful because we take the partnerstrip with our customers very seriously. Since its foundation, York Mechanical Engineering has constantly grown with the new demands of the market.

The story of success

ZNTK - Radom GmbH was founded in 1887. Since the company's founding principle of our is the constant development and modernization of the products offered. The products of our company are mainly intended for the railway industry. We specialize in the production of the valve elements that are used in train braking systems. Our mission is to deliver the parts for the rail industry, which have been manufactured with the highest quality. Our goal is to ensure the best delivery and prices to our customers.

Guarantee the highest quality

Our professional and highly qualified staff together with the experienced management guarantee the highest quality of products and services offered. Internal quality management system ensures the fulfillment of your refined quality requirements.

Width production possibilities

ZNTK - Radom Ltd. specializes in the production of parts and equipment that are used in the rail industry and the automotive industry.Our professional staff and the universal machines enable the production of parts and assemblies according to customer specification. We can also easily adjust our production capabilities to meet customer expectations. Thus we have the flexibility to accept various orders of the metal industry.

Our production capabilities include:

- Machining
- Ductile forming
- Heat treatment: Carbunieren and inductive hardening
- Electric melting and Gasschmelzscheiβen
- Surface treatment
- Sandblasting
- Painting
- Assembly

For the majority of our products, we use CNC machines.

Striving for the ever-evolving customer expectations, ZNTK - Radom GmbH focuses not only on the highest quality of offered products, but also on the search for new production solutions that satisfy the data reported by the customer's needs to the best level.

ZAKO bring ideas into form.

ZAKO metal technology offers the entire range of sheet metal processing, from the board to complex assemblies, from single parts to large series. We stock and process sheets of various varieties and strengths.

Perfect planning.

Experienced designers and engineers create with impressive 3D design tailor-made solutions for your projects.Competent and creatively makes ZAKO ideas perfect products. We are customer focussed, flexible, fast and reliable.

Technology that inspires.

The latest CNC laser technology and a fully automated high bay warehouse are also in use as punching technology, press brakes, welding robots and innovative Entgrattechnik. All this guarantees the best possible quality and efficiency.

ZAKO - before we finished.



Tags

Sheet metal, engineering, sheet metal work, sheet metal processing, metal, metal art, metal processing, metal processing, laser cutting, laser cutting, laser processing, laser technology, punching, punching, punching technique, deburring, deburring, bending, Bending, bending, bending technology, riveting, riveting, riveting, clinching, clinching, welding, welding, MIG, MAG, TIG, contract manufacturing, contract manufacturing, steel, stainless steel, aluminum, sheet steel,

Zannini is an international group that produces high-precision turned metal components for the automotive, electrical, hydraulic, oleodynamic sectors and we are also taking our first steps in the Hydrogen and Aerospace sectors.
With our CNC machines (bar passage from 2 mm to 65 mm) we work all turning materials (automatic steels, stainless steel, 42CrMo4, aluminum, ETG, and others), we are also equipped with grinding machines, sanders, deburring machines and machines for 100% control.

The Zaron precision parts Eberswalde GmbH is a company of the metalworking industry, was established in 2002 (slewing bearings through spin-off from the DRE / CON GmbH). By means of a new manufacturing process precision workpieces are individually manufactured according to the specifications and designs of our customers. This newly developed broaching method is patented and protected internationally.

Our customers
Our customers are mainly in the areas of safety equipment, instrumentation, tools, and electrical engineering. Furthermore, we manufacture for companies in the automotive industry and its suppliers.

Toolmaking
Our in-house tool is used not only for its own broaching tools and devices, but also stands our customers with appropriate capacity.

Employee
Zaron employs a highly motivated and qualified staff, who has many years of experience in sophisticated metalworking.

Our innovative broaching method differs in many respects from the conventional spaces.The main difference is in the design of the tool. This consists of lined cutting plates, using shims gaps are created, each forming the chip chamber. All clamping stages are mounted in this way and connected by guide elements and fasteners to a stable Räumpaket. This simple geometrical construction of the cutting plates enables easy resharpening without special equipment.

Precision in tooling
The nuts and bolts when Zaron methods are the tools. The end product can only be a precision part, if there are already the tools. Is achieved the precision wire EDM machines. Corresponding to the finished contour of the finished part, the exact geometries of the individual cutting boards are fixed in the design and pass it directly to the machine for processing.

With our procedure can be produced virtually every conceivable profile contours, regardless of whether any serrations or symmetric or asymmetric contours.The design and manufacture of the tools is carried out by highly qualified personnel on CNC EDM machines in-house.

Our core business is the profiling of external contours in with the new broaching, including toolmaking. This process is in many cases an economical alternative to milling, planing and slotting of teeth and grooves or other profiles.

Products:
Synchronizer body: Clean the teeth and grooves in one setting. Outer diameter to 90 mm.
Contours: Symmetrical or asymmetrical.
Teeth
Gears and toothed segments.

Our services are in addition to the outdoor and indoor spaces:
- Wire EDM
- Surface grinding
- Turning
- Milling
- ECM deburring