Surface treatment: receive an avg. of 7 offers per request

Discover specialized suppliers for surface treatment on Techpilot. Our platform connects buyers with suppliers who use a variety of techniques to enhance and improve the surface quality of your components. Benefit from better purchase prices by comparing multiple offers.

2990 suppliers for Surface treatment

62016671.jpg
95144301.jpg
Ignaz F. Görlacher Blechformteile GmbH Logo



WE BEND'S GO!



From locksmith specialist for innovation powerhouse
in sheet metal processing.




From a traditional locksmithing, 1817 in Villingen
was founded in the Black Forest, in early developed
the 60 years under the direction of Ignaz F. Görlacher a company that specializes in sheet metal processing.



The Görlacher Blechformteile GmbH is now an established
Suppliers operating for well-known companies from the automotive, electrical industry, laboratory and air conditioning as well as the machine and equipment.



The core competency lies in producing high quality
Housing and sheet metal structures for various
Application areas - especially in special machine.



As a competent partner modern imprinting we adapt
the continuous expansion of our customer base and to orient ourselves constantly to meet the increasing demands
the high-tech manufacturers.



Covering an area of over 2500 square meters approximately 25 qualified and highly motivated employees produce under the always use the latest technologies.




Founded

1817

Employees

20 - 50

Certifications

ISO 9001:2008
Location

Villingen-Schwenningen

Germany - 78048

Founded

2016

Employees

5 - 10

Certifications

No certificates
Location

Marijampole

Lithuania - 68110

52638026.jpg
31957981.jpg
26254717.jpg
42869536.jpg
29618217.jpg
42754929.jpg
Ilmberger Maschinen- und Zahnradfabrik GmbH Logo

For over 50 years cogs and gears of ILMBERGER are in use worldwide.



Success factors are customer focus, motivated and qualified staff, high-quality technical equipment and versatile products of the highest quality.



As a medium-sized company with short decision paths we offer you the quality-oriented production of gear components.


Founded

1946

Employees

50 - 100

Certifications

ISO 9001:2008
Location

Straubing

Germany - 94315

IMATEX SA Logo

IMATEX SA

Founded

1948

Employees

100 - 200

Certifications

No certificates
Location

Santana de Mures

Romania - 547565

Would you like to know which suppliers are ideally suited to your requirements?

Register now and submit your request.

gehaeuseteil_aus_1_5mm_dickem_aluminium.jpg
eckverbinder_aus_aluminium__5-achs-bearbeitung.jpg
gehaeuse_aus_verzinktem_stahlblech.jpg
schweissbaugruppe__lackiert.jpg
flansch_dn65.jpg
zerspanteil__kreuzgeraendelt.jpg
IMF Stefan Ruhnau GmbH <br> Industriemechanik und Fertigung Logo

We are a family of seven, very dedicated, flexible employees. This short term appointment requests are usually feasible. In our construction are (we construct with SOLIDWORKS), prototyping and series production up to final finish in one hand.




The focus of our company is located in sheet metal processing and metal processing as well as in CNC machining.


IMF offers you the ability to precisely match your product to your needs. This begins with the prototype according to the specifications of your development or design department. Our extensive experience in the pilot series and Erstmusterfertigung guarantees a high workflow in the subsequent industrial production. The bill of materials created as needed to complete the offer competent intermediate in fine mechanical industry.



Special custom-made offers IMF in the field of
19'' - technology.Custom front panels are fitted to your liking with cut-outs for monitors, control panels and switches. Furthermore, all panels, devices and BNC - Handover fields professionally mounted and operational.



A performance focus lays IMF in the demanding
Area of safety technology. Apart from the exact production of housings for indoor and outdoor use, the installation of camera installation kits is performed.



With our CNC - controlled machines we manufacture in a short time large quantities of your products.Precision manufacturing to punching and nibbling machines, according to the DXF files of your or our development department, and 3-axis controlled press brakes.




Program of delivery

Housing, drawers, built-in boxes, racks, 19 "- racks, heat sinks, sockets, bolts, flanges, adapters, sleeves, cap screws, thumb screws, insulating washers, mounting brackets, pole holder, front panel, ventilation grilles, monitor mounts, monitor frame, lamp housing, welded assemblies, mounting brackets, hoods , Wall Brackets, IP Enclosures, LED display boxes, 19 "- aperture, drawing parts, machining parts, milling parts, bended parts, bending parts



Services

Design, drafting, planning, procurement, printing, assembly, assembly production packaging



Materials

Copper, brass, bronze, aluminum, steels, stainless steels V2A / V4A, ABS, POM, PTFE, PE




Processing methods

CNC milling, CNC turning,

Founded

2000

Employees

5 - 10

Certifications

Location

Bothkamp

Germany - 24250

53575442.jpg
IMMO-KONCEPT  sro Logo

IMMO-KONCEPT sro

We offer:

Machine and plant engineering in general
Metal production and production of metal parts, and Erzeugnisen
-Mechanical and Gerätenbau mechanical drive
Metal surface treatment and mechanical processing
Surface treating chemical, electrochemical and paints
-QM (Qulitätsmanagment) system is regulated in accordance with the requirements of ISO 9001:2001.

TECHNOLOGICAL POSSIBILITIES:

Locksmith
• all types of locksmith, and assembly work

Separation of materials
Saw
Tafelschere

Cut shapes
Oxygen, plasma, laser, water jet

Extort
Press brake max. Thickness P8,
max. Thickness P16

mechanical processing

- CNC Milling
Machining Center Quick MAS 1000
CNC horizontal machining
W100A 1600x1120mm
Table 2500x2500x6000mm
Sprocket Walzfrässer FO6
conventional Frässemaschinen FB

- CNC Turning
FAT 560CNC D = max.560mm, max. length 2000 mm
SUI 50 CNC D = max. 500mm, max. length 1500 mm
Processing conven-Ionele + CNC machine:
Spindle max 120mm
Length max.3800mm
conventional lathes
SU50, D = max.500mm, length = 1000mm
M63, D = max.630mm, length = 2000mm

Surface treatment
Wet paint, powder coating
Galvaning chromating Smaller parts pickling phosphating

Radiate
Welding MIG, MAG, Al, stainless








Founded

1997

Employees

20 - 50

Certifications

Location

Bratislava

Slovakia - 85101

img_5072.jpg
58116193.jpg
40212467.jpg
44415532.jpg
54511214.jpg
Imortas A.S. Logo

Manufacturing of mechanical components for automotive,agricultural machinery and hydraulic industries.

Founded

1981

Employees

200 - 500

Certifications

ISO 14001
Location

Bursa

Turkey - 16159

Impreglon Deutschland GmbH Logo

Impreglon Deutschland GmbH

Founded

Employees

Certifications

Location

Lüneburg

Germany - 21337

Inanmakina Inancoting Logo

Inanmakina Inancoting

Founded

Employees

Certifications

No certificates
Location

Istanbul

Turkey - 34000

60421031.jpg
73172186.jpg
71325526.jpg
52611565.jpg
31315812.jpg
83445164.jpg
23771436.jpg
25751148.jpg
06133787.jpg
IN.CO.M. SRL Industria Costruzioni Meccaniche Logo

IN.CO.M. Srl is a family company based in Italy, in the Marche region, in the Province of Ancona.

Founded by Mario Campolucci in the 60s, it was born as a small workshop to grow steadily to become a reference point for the construction of industrial machine components, semi-finished products and carpentry work in stainless steel, iron and aluminum.
From sheet metal laser cutting to final treatments, through assembly and welding.

In 2020 the company is managed by Matteo, Giovanni and Mario Campolucci (members of the board of directors and president) and is a long-term supplier for some of the major companies in the agricultural food sector and in various other industrial sectors such as the packaging industry , medical, chemical / pharmaceutical and special waste management.

Founded

1981

Employees

20 - 50

Certifications

ISO 9001:2015
Location

Belvedere Ostrense

Italy - 60030

INDIA-DREUSICKE Berlin Logo

INDIA-DREUSICKE Berlin

part design, making of prototypes, mould making, injection moulding, surface technologies, printings, laser engraving, spray painting, pad printing, round printing, laser structuring, subassemblies

Founded

1929

Employees

50 - 100

Certifications

No certificates
Location

Berlin

Germany - 12277

13674915.JPG
21610551.JPG
26675382.JPG
72731253.JPG
24062263.JPG
91034241.JPG
31406074.JPG
Indorf Apparatebau GmbH Logo

Indorf Apparatus GmbH

Partner in the industry for more than 50 years

The product range includes sheet metal weldments of steel, stainless steel and aluminum frames, mounting parts, oil tanks, fuel tanks, water, transport equipment, air cushion platforms, products, food technology and cabs. Manufacturing processes such as CNC plasma cutting, CNC edge and modern welding techniques ensure the production of quality products at the highest level. Beyond the manufacturing process making more and more industrial customers on the experience and the technological possibilities of Indorf Apparatus GmbH back. Thus, the project, the three-dimensional structure of the prototype and series production is realized under one roof at home.

Other applications, processes:
3D construction
Data exchange formats: DXF, DWG, SKF, IGS, STP, SAT, PRT, ASM, IAM, IPT, IDW
Jigs and fixtures
Templates
Forming, edging, bending
Milling Turning, drilling, tapping
MIG / MAG welding
TIG welding
Profile bending
Radiate
Industrial wash
Powder coatings
Assembly work

Founded

1959

Employees

20 - 50

Certifications

DIN EN ISO 3834
Location

Bomlitz / Benefeld

Germany - 29699

Indústrias Metálicas Veneporte, SA Logo

Indústrias Metálicas Veneporte, SA

Founded

Employees

100 - 200

Certifications

Location

Aguada de Cima

Portugal - 3754-908

Industrie Coating Verfahrenstechnik GmbH Logo

The company ICV GmbH, based in Oberndorf aN was founded in 1990 in Dornhan. Initially the production was focused in the wire-molybdenum spraying of transmission parts for customers from the automotive industry. In 2000 the company moved to larger premises to Oberndorf aN.

Meanwhile supplied ICV customers from mechanical engineering, textile industry, paper manufacturing industry, medical technology, electrical engineering and research with high-quality ceramic and metal coatings for various applications.

For over 22 years we have been successful with the coating technology and are founding members of the GTS (Association of Thermal Sprayers). Based on years of experience and certifications by TÜV according to DIN EN ISO 9001:2008 and the GTS the quality of our coatings is always assured and reproducible.

By working closely with specialist suppliers in the finishing of coatings, we offer you complete part fabrication and repairs includingFinishing at. Through our high level of flexibility very short delivery times are at any time possible, which is especially appreciated during repair coatings from our customers. We finished quickly and cost of the item to mass production.

With our method of plasma spraying and high velocity oxy-fuel (HVOF), as well as wire flame spraying and powder flame spraying, we are your reliable partner for metal coatings and ceramic coatings.

In thermal spraying, the desired surface materials in the form of wire, rod or powder depending on the application with different methods or melted in a torch and deposited on the surface of the component. The surface is mostly previously roughened by blasting, in order to ensure clamping of the melted particles on the surface. This creates an adherent layer.

It&gt; 2 mm are possible depending on the material layer thicknesses.Due to component-specific covers functional surfaces can be partially coated. The strength of adhesion to the edges is limited. Therefore, edges should be&gt; 0.7 mm are rounded with a radius.

The surface can be refinished so accurately depending on the sprayed-on material by grinding, turning, lapping, polishing. The coating material may be a single element, an alloy or a composite material. Since no undue thermal stress of the substrate occurs during coating, structural changes of the base material can be avoided.

The selection of products and layers is practically unlimited. The coatings are usually made of metals, ceramics, carbides or individually assembled spray materials.

The use of thermally sprayed coatings is an advanced and cost-effective method to impart desired properties to a surface. These allow increased performance in the specific application.By the use case fitted surface, often costs can be saved in the base material.

According to studies, only 10% of the potential applications of thermal coatings are utilized in Germany.

Founded

1990

Employees

Certifications

ISO 9001:2008
Location

Oberndorf

Germany - 78727

Industrie-Wartung-Meschede Logo

Industrie-Wartung-Meschede

Founded

2007

Employees

20 - 50

Certifications

ISO 9001:2008
Location

Meschede

Germany - 59872

Would you like to know which suppliers are ideally suited to your requirements?

Register now and submit your request.

inex21_102ncz_7_3310.jpg
inex21_102ncz_7_1361.jpg
inex21_102ncz_7_1615.jpg
dji_0764.jpg
dji_0758.jpg
dji_0755.jpg
dji_0730.jpg
outside_top.jpg
inex21_doku_668.jpg
inex21_doku_562.jpg
inex21_doku_771.jpg
Inex System GmbH Logo

INEX is a full-scope furniture producer with more than 10 years industry experience. For over a decade, we fulfill the highest standards of leading international retailers, consumer brands and furniture companies, with full in-house control of the whole manufacturing process.

Founded

2011

Employees

100 - 200

Certifications

No certificates
Location

Berlin

Germany - 10179

meng-firmengebaeude.jpg
versandabteilung.jpg
spritzlackieren__ueber_3.000_farbtoene.jpg
aluminiumteile_einschliesslich_lackierung_und_beschriftung.jpg
fraesteile_einschliesslich_schweissen_und_zusammenbauen.jpg
fraesteile_aus_aluminium_einschliesslich_lackierung.jpg
kanten__lackieren_und_beschriften.jpg
vormontage_im_werk__cortenstahl.jpg
lieferung_und_montage_vor_ort.jpg
Informationstechnik Meng GmbH Logo

We are manufacturers of signage systems. With a high level of vertical integration, we produce almost all parts in-house.

The production
Speed and quality are only possible with this comprehensive in-house production depth:

sheet metal processing
of aluminum, stainless steel and steel sheets. Shearing, edging, round bending, CNC milling, welding, drilling, sandblasting, painting.

aluminum profile processing
sawing, CNC milling, drilling, welding, anodizing, painting,

welded structures
made of steel, galvanized up to 6 meters high, made of aluminum and stainless steel.

plastic processing
Mainly made from acrylic, partly from polycarbonate and from PVC. sawing, CNC milling, gluing, thermal forming, 3D contours.

paint shop
With our own color mixing system in over 3,000 recipes for individual color design in all RAL colors and in Pantone shades. Also using the NCS color system and as an anti-graffiti protection coating.

lettering
in large-scale digital printing on foils or as UV printing directly on solid materials, as well as with adhesive films. Engraved and raised tactile writing for the visually impaired, Braille and relief letters. Facade lettering made of stainless steel, aluminum and plexiglass, illuminated letters and banners, individual light boxes with decorated fonts.

integration
of electronic displays, screens and computers as media elements. Also letterbox systems and brochure holders. Call systems, outdoor and indoor display cases. Processing of glass plates for glass signs, from glass door signs to large glass stele.

Founded

1990

Employees

20 - 50

Certifications

No certificates
Location

Birkenfeld

Germany - 55765

Ing. Blatný Jan Logo

Ing. Blatný Jan

Metal processing: milling, turning. QR constructions: brackets, columns, scaffolds.
U - profile editing.

Founded

2000

Employees

20 - 50

Certifications

ISO 9001:2008
Location

Ivancice

Czech Republic - 66491

dji_0053.jpg
Ingenieurbau Bismark GmbH Logo

Ingenieurbau Bismark (IBB) GmbH was founded in 1990 and is headquartered in 39629 Bismark. Ingenieurbau Bismark GmbH currently employs 38 people. The core area of the company is steel and plant engineering.
The product profile covers the design, manufacture and assembly of complete steel buildings in system construction as well as special structures.
Production takes place in a production hall with an area of 6,000 m².
The core of modern production technology is a PCD 1100/1100 DG CNC drilling and sawing machine. This means that steel profiles up to a height of 1,100 mm and a length of 22 m can be processed automatically as far as possible. A computer-controlled NC drilling machine enables the automated production of flame parts from thick sheets up to 60 mm thick.
For the production of industrial railings, ibb offers a modern CNC mandrel tube bending system with integrated rolling and ring bending equipment. 11 floor-controlled or radio-controlled bridge cranes enable effective handling of steel structures with a single piece weight of up to 15 t.
A modern and powerful continuous blasting system with a throughput width of 1,500 mm and a newly built paint spray house with underfloor extraction with an area fund of 500 m² ensure the high-quality execution of paint coating work and anti-corrosion coatings. Since December 2000, the ibb has been certified in accordance with DIN EN ISO 9001:2000.
Ingenieurbau Bismark GmbH has the manufacturer qualification for welding steel structures in accordance with DIN 18800-7:2002-09 for welding processes

111 Manual arc welding (E)
135 MAG welding (t MAG)
783 Ignition stud welding (DS)

and has had the WPK certificate in accordance with DIN EN 1090-1 and the steel construction welding certificate DIN EN 1090-2/EXC3 since 2013.
Ingenieurbau Bismark GmbH employs highly qualified and experienced architects and specialist engineers and is therefore able to plan complex construction projects and carry out qualified construction management.

Founded

Employees

20 - 50

Certifications

Location

Bismark (Altmark)

Germany - 39629

2015-09-15-1961.jpg
97372463.jpg
81232346.jpg
34656353.jpg
92361441.jpg
11133993.jpg
96043233.jpg
53246906.jpg
Ingenieurbüro Dipl.-Ing. (FH) Volker Junicke Logo

Through years of experience in the management of my engineering firms in the different fields of activity, I have very good contacts with Eastern European steel processing plants, both in weldments, and in the cutting process. These powerful pavers do not have a Vertieb. This part, I assume so that the market does not have to give up the quality but very cheap quality work.
Here, getting involved with the technical assistance and coordination and with the complete commercial processing.

Founded

2011

Employees

< 5

Certifications

ISO 9001:2008
Location

Ennepetal

Germany - 58256

Benefit from the advantages of our digital sales platform
Realtime
Real time

Find the ideal supplier in just 1 minute

Efficiency
Efficiency

Communicate directly with buyers

Prices
Price transparency

Unique market price comparison to realize the best prices

Integration
Integration

Existing processes, systems and suppliers can be easily integrated.

For Free
Free of charge

Buyers use the platform completely free of charge

Are you a supplier? Find perfectly matching requests.
Are you a buyer? Submit your request.