Precision turned parts of Lubig For over 50 years, a term for Competence Quality Reliability ensured through modern technology and trained staff. We supply: Automotive industry and its suppliers Pneumatic and hydraulic industries Electrical, fittings and Heating industry Mining and ball bearing industry Engineering etc. We are your competent partner in the phase the development and construction.

Founded in 1882 by Alfred Charpilloz, HELIOS is dealing with the most difficult industrial challenges for more than a 120 years. By paying a permanent attention to precision and high value-added activities, the different generations managing the enterprise led HELIOS to a balanced mixture of social spirit and modern technology. HELIOS A. Charpilloz SA combinates today a century-long knowhow with the most advanced production facilities. Consequently, 250 employees produce 120 millions parts each year on its sole production site located in Bévilard (Switzerland). products HELIOS A. Charpilloz SA is active in traditional and CNC turning, gear-cutting of wheels and pinions, secondary-operations on transfer machines and CNC turning machines and diverse assembling and finishing operations for watch components. Our major activity sectors are the automotive and watch industries, electronics, hydraulics and medical applications. automotive Products Components for turbochargers Security parts for ABS and airbag systems Components for automatic gear boxes Technical data Turning Ø 1-52mm on 220 traditional Tornos turning machines 40 CNC machines of different brands 20 transfer machines 30 secondary-operations CNC turning machines Heat treatment installations watch components Products Various cutted gears and pinions Calendar circles Components of the drum (excepted the spring) Technical data Turning Ø 1-52mm on 220 traditional Tornos turning machines 40 CNC machines of different brands 100 cutting machines, up to module 1 Rolling and rounding Automatic and semi-automatic rivetting machines Heat treatment installations and various finishing capabilities electronics Products Sockets Receptacles Plungers Barrels Technical data Turning Ø 1-52mm on 220 traditional Tornos turning machines, some of them with polygon-cutters 40 CNC machines of different brands Heat treatment installations and various finishing capabilities miscellanous Products Components for hydraulic systems Micromotors axes Cutted gears for micromotors Screws for medical applications Special parts for hearing devices Technical data Turning Ø 1-52mm on 220 traditional Tornos turning machines 40 CNC machines of different brands 100 cutting machines, up to module 1 Rolling and rounding Automatic and semi-automatic rivetting machines Heat treatment installations and various finishing capabilities

A. WENZLER GmbH & Co.KG has produced precisely engineered turned parts for industry since 1962. The company is considered to be one of the leading partners in the automotive and medical technology sector. When Jens Kurzhals, machine operator at Wenzler was interviewed, he said: "Our pieces are not supposed to be good, but excellent.“ He only needed a few words to sum up the philosophy of the company steeped in tradition: We want to move the world forward a little bit with every turned part. s t r u c t u r e: Size of operation: 42 employees, breakdown: 30 in Production, 4 in Administration, 3 in Quality Assurance, 5 apprentice (cutting machine operator) QM System: Certified according to ISO 9001:2002 and ISO/TS 16949:2002 Sales in 2008: 5.0 million Euro Investments 2008: 1 million Euro p r o d u c t i o n: Materials Free cutting steel, case hardened steel, structural steel and tempering steel, rust and acid resistant steel as well as extrusion metals such as brass, copper, aluminium and titanium Further processing Polishing, honing, deep hole drilling as well as all kinds of thermal and surface treatments

Information about SCHAIBLE Product programm Dear Sirs, we are proud to present you our varience of products and services the Schaible company can deliver: 1.We produce precision turning parts beginning from ø 1 mm up to ø 65 mm. Therefore we use modern CNC and conventional-turning machines. Your most ambitious parts we can produce on our 9-axis high technology machines like Citizen M20, Traub TNC30, TNC42 or TNC65. 2.We produce gears and pinions (beginning from module 0.2 up to module 3.0; with a maximum diameter of 80 mm) with modern and precision-milling-machines (e.g. Koepfer, Monnier&Zahner, Wahli) as well as worms up to module 2.5. To assure our high quality production we use modern measurement systems. 3.Supplementary production We have a wide selection of machines which enable us to do specific upgrade processes on your parts (e.g.grinding machines, super finishing machines, polishing machines, ...). All of our inspection, measuring and test equipment is network based. We are able to do statistical process control (SPC). We will fulfill all common requirements on quality recording. Our Quality-system is implemented based on DIN EN ISO 9001:2000. We are certificated since Oct.1999. We have customers in nearly all fields of industrial production (e.g. automotive, gear motors, medical, precision engineering, electrical, inspection and measuring industry). Our customers appreciate the technical consulting we can provide to optimize their parts already during the planning and engineering phase. For many years we are system supplier for a lot of German and international automotive suppliers. We work with all kind of materials as brass, steel, ETG, stainless steel, plastics, etc. and are able to do hardening and galvanic processes. To give you an impression of our company a prospect is added to this writing. Of course you are always invited to contact or visit us, so we can show you more about our production and capabilities. We focus on our work to solve your problems. We are sure that we can fulfill your requirements, because our staff is high-qualified and motivated. The cooperation with our customers is very tight and based on experience over dozens of years in our business, so we are able to avoid mistakes and unnecessary costs. We hope this short explication will call your attention. We would be happy to start business with you on partnership.

• Installed in 1976 in Bayeux, we oriented machining: - Stainless steels, - Steels with high mechanical properties, - Aluminum alloys and copper, - Plastics. • We provide technical follow: - Surface treatments, - Thermal treatment - Purchases of components to sub-assemblies [Fasteners, seals, ball bearings, ...]. • For your rooms a precise finish: - Inside and rectification /, centerless and flat. - Grinding, deburring, hard turning. - Installation, assembly, welding subassemblies

Teknia Automotive is a family owned company with headquarter in Spian. We are focused on development of components, assemblies and specific manufacturing processes for the automotive industry. 20 years of experience, 2,000 employees, 17 plants and a global footprint contribute to the success of the company. The Machining Division of Teknia Automotive is responsible for turning and machining technologies. Our plants are located in Spain, Poland and Brazil. Additionally to that, we have an office in Stuttgart, Germany which is responsible for Business Development and Key Account Management of the German market. Our product portfolio includes high-precision and safety parts such as nipples, bolts, pistons, valves, sleeves or connectors for brake systems, air conditioning, high-pressure fuel systems, transmissions, steering systems, clutches and gear shifts. Our components are manufactured in small and medium scales (rod diameter 4 - 58 mm) on both CNC mono- and multispindle, mechanical multispindle machines and mechanical transfer machines.

Your partner in the field of CNC processing of metal and machining technology. We manufacture individually manufactured high-tech products, prototypes and small series. We work for industries that require complex components with high precision.

Under the light of 20 years of engineering service experience and knowledge, we continue our services in the sector in a more modern facility with our continuously renewed machinery park. Our company has started its production about machining sector in 2016 and followed the rapidly progressing technology with its expert staff until today. Our company produce mechanical parts on a project basis. We produce in accordance with the technical drawings prepared by the customer or presented by the customer. Even if we have been small-sized enterprise, understanding the importance of quaility standart and success in overcome from challenges, in short time, we are recognized by machining industry ecosystem and never gave up these principles since we had been established.

With the company move in 2013, Elpas gained a production area of 5,000 m2. Thus we were able to expand our machine park immensely and optimize our production processes. Our goal is to achieve the best possible customer satisfaction and product quality with the existing competition in the automotive industry. It is important for us to provide technical advice before and after the start of the project, any suggestions / suggestions for improvement for product design and the best possible planning of the necessary tools, test devices, etc.