The Schiener company has been active in the metalworking sector since 1965. In 1995, Schiener Rudolf took over his father's workshop and founded a turning shop with CNC technology.
Today, modern CNC-controlled machine tools are in use. At present, 12 employees work in our company. We offer our customers technically sophisticated and ready-to-assemble turned and milled parts, which we manufacture exactly to specification. We are increasingly focussing on 5-axis machining for series milling.
Our new company headquarters in Sinich-Meran has 600 m² of floor space, where we have state-of-the-art CNC turning and milling machining centres.
Renowned companies from the mechanical engineering, food and electrical industries as well as harvesting machine manufacturers rely on us as a high-performance and flexible partner.

Thanks to the flexibility of our employees, the mechanical equipment of our company and the cooperation with competent partner companies, we can fulfil comprehensive work flexibly, individually and promptly and respond to the wishes of our customers.
The high quality of our products is guaranteed by our DIN ISO 9001:2015-certified quality management system. We support you from the planning stage right through to on-time delivery.

Our Story:



The company was founded in 1994 by Heinz-Josef Schlemmer as a sole proprietorship on part-time basis. The basis was the further handling of turned parts in wages for the turned parts industry.



After a short time the first cam-type machines were put into operation, it was followed by the acquisition of a property with about 150 m2 of commercial space. In the year 2000/2002 and 2004 made further purchases of CNC lathes, whereby the premises were again too tight.



In the year 2005 is Mr. Schlemmer the opportunity to acquire the company Johann Schnekenburger GmbH, where he was employed full since 1983.



The company JDS, which was founded in 1950 by Johann Schnekenburger and until 2005 was in the second generation of family ownership, was for more than 50 years in the field of fastening technology on the market. It screws of all types were produced.



The companySchlemmer of turned parts had been operating successfully for over 10 years in the field.
With the acquisition of the company by Johann Schnekenburger Schlemmer that production range was extended many times and it was founded in the gourmet Metalworking & Fasteners GmbH & Co KG.


We invest in the future:



This is the foundation and our philosophy. We will invest in the coming months and years in the latest machinery and equipment. The expansion of warehouse and production areas are planned.



Our range of services:



Our machinery includes several modern CNC lathes with up to 5 axes, rotary transfer machines, bend machines, thread rolling machines, such as various finishing machines.



The product range comprises rotary parts of all types and materials, threaded rods and screws with hexagon socket as Hexagon. The production of fasteners for the dowels and construction industries as well as an integral part of the furniture and electrical industry.
As will be made all the operations which in-house usually we are able to respond at short notice. Heat treatment and electroplating finishes, such as hot-dip galvanizing are made by reliable partner at short notice outside the home.



Our market:



We deliver the Swabian quality work in over 40 countries around the world. However, the focus is on Germany and Europe.



Our Quality:



State of the art measuring equipment and SPC-controlled programs ensure quality.
Our products are subject to constant review of the ISO 9002 is similar. This was taken over by the company Johann Schnekenburger that was zertiviziert to 2003, according to ISO 9002. Re Zertivizierung is sought.

Why you are right with Schneider turned parts?
Because we are already on the market since 1952, we continue to evolve, have a small staff to respond quickly enough and skilled workers to deal with all the requirements of our customers always meet. Long-term business relationships prove that our performance fit.


What Schneider turned parts for you making?
We manufacture long turned parts up to a diameter of 38 mm and a length of 1000 mm, also short turned parts up to 60 mm in diameter made of aluminum, copper, steel, stainless steel, brass and plastic. We milling, drilling, grinding, pressing. Here we are, we specialize in medium and large series. The finished parts are available either completely or we store them in our computer-controlled warehouse for you.
We work with a modern equipped PPS and MDC system and put all the tasks required by our customers to quickly and effectively, eg consignment stock, Kanban deliveries or dial-up calls.


What else is there interesting about Schneider turned parts?
Our skilled professionals, we form largely from themselves and develop them to professionals so that we can meet customer requirements in the future.
Already experienced in training as a machinist and experience our employees, our customer orientation.
With our modern heat exchangers, we use the waste heat from the engine to heat the production halls, which saves us operating costs and helps the environment.
With flexible employees in multiple shifts we can keep delivery times short and absorb demand peaks.

Quality connecting ...

Anything but ordinary: Founded in 1991, the shock GmbH has etabiliert as drawing parts specialist with vast experience in the fastening, assembly and fastening technology. Through performance and quality of highly trained employees, our customers more than satisfied close sets. A great success, which we see as a guide for the future, because Swabian Tüftlertum, bodenstaendiges growth and professional service will remain our most important milestones.

Whether as a training company or as a forward-looking company with an excellent reputation, we are rooted in our values, as well as always open to new ideas: for example, for your inquiries, to which we look forward.

In this sense, we are updating our story, which always puts a traditionally at the center - the success of our clients including high-profile screws wholesalers and industrial large customers from different industries.

Where other abwinken, we are happy for you to go to the starting line: rotary and stamped parts outside the norm, from small lot to the very large quantities. Whether high-quality fasteners such as screws, nuts or DIN / norm parts -. Their special requests are part of our standard, because we even away from the ordinary, the manufacture what you need.

It is precisely this flexibility and customer orientation is characterized buns from: With certified quality we deliver to you as part of the production as well as cooperation with longstanding punctual, fast and reliable. The basis for this is our comprehensive know-how that has grown to more than 20 years and has shaped together with our German / European top quality industry's first-class reputation of the company "screws and turned parts Schock GmbH".

And we are a little proud, but see this primarily as a commitment to anew to be present for our customers every day with Topp services - in the automotive sector by working with certified partners (at least ISO 9001:2008), which not only our high, but also the strictest requirements in accordance with ISO TS 16949 meet.

With us it's all about (Precision) turned parts in standard and customized designs and DIN standard parts with special features. The focus of our core competency focus is on the quality of the advice, the variety of products to a wide variety of editing options with different surfaces and a high flexibility with regard to the economic quantities.

Our range at a glance:

DIN standard parts with special features:
CN = peak (DIN EN ISO 4753), FO = studs without interference thread (DIN 962), etc.

Processing:
Depending on the accuracy and tolerance, we offer appropriate processing options. Our machinery ranging from CNC to NC. With additional manual work we can keep production costs low, since not always tolerances of 0.01 mm are required.

Surfaces:
Electroplating and heat treatments are just as important as electro galvanizing, hot-dip galvanizing, silver, gold, nickel plating, bronzing, phosphating, barrel finishing, zinc flake coatings (CrVI-free) and clamped / sticky thread fuses acc.DIN 267, Part 28 / DIN 267, Part 27, etc.

Materials:
Steel, stainless steel, nonferrous metals, plastics, special materials: 2.4952, Inconel, Hastelloy, Nimonic 80A, titanium (3.7035), tantalum, zirconium etc.

Production program Turning:

Precision turned parts with axial and vertical drilling and milling operations; hard turning; inner square, hexagon socket; keyways; milling contours in the diamete...

We are a family-run, small, fine company that is committed to the production of turned parts of all types. In this way, we cover all facets of turned part production, from small to large series, from the long turning and short turning and multi-spindle areas. We can machine all diameters from the bar from 4.00 mm up to 65.00 mm. In terms of materials, we are also very versatile and manufacture all common types of steel and stainless steel, as well as aluminum and brass alloys, as well as plastics such as POM or PEEK.

The shoemaker Präzisionsdrehteile GmbH offers since 1949 through precision and quality in the design and manufacture of turned parts and related assemblies. Approximately 1,800 New parts annually prove this.

Schulte-Tengler GmbH is your partner for precision turned and milled parts.
- Precision is not a godsend! -

On an area of 2,500 m², we use the most modern machines to manufacture precision turned and milled parts with a diameter of 3 - 450 mm and lengths of up to 800 mm. According to your specifications, we deliver ready-to-install, including all rework, spaces, as well as surfaces and heat treatments.

Our customers are spread across a wide variety of industries, e. B.

- Automotive
- Mechanical engineering
- Wind turbine construction
- Electrical engineering
- Fastening technology
- Hydraulic component construction

uva.

"Precise for you."

With this quality requirement, we welcome you in the world of SERA Metallbautechnik. We not only commit ourselves to the highest precision in the production - our focus is on your unrestricted satisfaction.

Founding of the company 2002
First commercial premises in Lovrenc na Dravskem polje
Experiences mean the future
We work with 15 years of experience and are constantly investing in new technologies.

We manufacture high-quality and sophisticated machine parts and offer a complete service.

Our core competence lies in the production of CNC turned and milled parts made of aluminum, steel, stainless steel, non-ferrous metals and plastic. As an experienced team, we are flexible and extremely committed. A strong price-performance ratio and personal contact with our customers set us apart.

We are your competent partner in fluid technology with four locations in and outside Germany

- CNC long and short turned parts
- Vertical turning
- Assembly of final-tested mechanical components
- grinding (inside, outside, in the passage etc.)
- honing
- milling
- sandblasting
- hard machining



Complete machining on modern CNC machines (long and short turned parts, vertical turning)

- complex workpieces (from rd3 mm to rd300 mm, vertical turning up to rd150mm) can be produced in batches from 1000 to 100,000 pieces

- All steels, case-hardened and highly tempered nitriding steels, stainless steels, non-ferrous metals as well as extruded, sintered and forged blanks can be machined.



Our precisely machined and accurately controlled individual parts are assembled with the supplied, controlled external parts and then tested.
The end result is tested and perfectly functioning assemblies directly to the customer's assembly line.

S&H Feinwerktechnik GmbH & Co. KG is your partner for CNC machining in the areas of 3 and 5 axis milling and turning with over 10 years of experience. Materials such as 1.4462, 1.3964, titanium, 1.4301 - 1.4571, Eladur, plastics are not unknown to us and we process them every day. We set the highest quality standards for our services for our customers in the fields of mechanical engineering, environmental technology, the food industry, pharmaceutical industry or defense industry, which we are constantly deepening through our in-depth expertise and distinctive expertise.

Pony S.R.L. produces in Italy products and solutions for the industrial automation: connectors, sensors, wiring systems, overmolded and modular distribox. Pony is also specialized in turning work. The company has its headquarter in Cavaglietto, in the province of Novara.

The plant occupies an area of 43000mq, of which 5000 are covered, where take place all the working processes: research and development, design, prototyping, plastic moulding, cutting cable and wiring, traditional and selective electronic SMD and wave soldering, CMC turning, assembly of the components, that allow to provide new solutions in the design of the machines.

Signoretto SRL is a company in the province of Verona specialized in precision mechanical processing. Founded in 1974 as a mechanical turning shop, over time it has developed the set of technologies and skills that now collaborate in the production of components for various technological sectors.

Machining is carried out from solid and from the tube of many ferrous and non-ferrous metals, as well as some plastic materials.

The company provides additional internal services such as mechanical assembly, welding and packaging. While it uses partners for finishing services such as galvanizing, cataphoresis, liquid/powder coating, electroplating, anodizing, tempering, etc.

foundry group
4 locations as a foundry
1 location with mechanical processing

We have been a supplier to the mechanical engineering industry for thirty years.

Our extensive manufacturing options allow us to produce a very wide range of machine components and assemblies.

The diverse and modern production is designed in such a way that both individual parts and series can be produced economically efficiently and with the required precision.

An ERP system ensures smooth and punctual order processing, and our quality management ensures that the highest quality requirements are met.

Through continuous training of our employees but also through external audits, we ensure that we can meet market requirements in the long term.

Due to our small size and the resulting short decision-making processes, we can execute customer orders quickly, easily and flexibly. On this basis, we have the opportunity to offer extremely competitive prices.

Our highly qualified team produces on the basis of customer drawings promptly individual parts, small and large series at the highest quality level. Our production area of more than 1,000 m² offers space for our modern machinery.

We are your partner in the processing of engineering plastics such as PE, PA, POM, PVC, as well as all other marketable materials. We turn, mill, drill to fully meet the application requirements of our customers.

The official birth of SML dates back to 1994 and starting from the simplest processes, the company slowly began to specialize in two sectors: firstly, in the mechanical finishing processes thanks to the technical dedication and craftsmanship and secondly, in the processing of car wheels, flanges, channels and other components related to the automotive sector.


Our technical knowledge allows a product to go from prototype to series. We have created a short production chain, eliminating steps and compressing production times, for maximum optimization.

Since 1984, the company socrima specializes in manufacturing custom parts and customer specifications.

Socrima provides optimized, reliable and responsive solutions for your machining small and medium series of parts in all materials and in a wide range of dimensions.

Socrima can meet your needs:

Traditional turning,
CNC Lathe
CNC milling,
CNC turning,
CNC Machining Center,
CNC punching,
CNC bending,
Silver solder,
Solder,
Plating localized "buffer" buffer tinning, silver pad.
Socrima supports operations related to machining, surface treatment (plating, tin plating, nickel plating, epoxy paint, etc ..., annealing heat treatment, etc ...).

Socrima supports the assembly of subassemblies from machined by us and / or provided by you parts.

Since 1984 Socrima works for the electromechanical sector, it manufactures custom parts and customer specification for the transport and distribution of electrical energy average low and high voltage.