The Promekon GmbH is an innovative company and continues its production expertise to new and advanced manufacturing technologies. A well-trained and motivated team of staff in the individual manufacturing areas are available for any troubleshooting.

The company's products are analyzed at the beginning and adjusted together on the manufacturing processes with the customer when necessary. The PROMEKON GmbH is a modern 3D design program with the appropriate add-on modules. This one remains in the field of development open and can therefore plan and implement a variety of manufacturing processes.


So we can offer you the following services and manufacturing capabilities for your product range:


1 In the area of construction: 3D structures in the sheet area including winding-up; 3D structures of pipes, pipe penetrations round to round, round to square pipe penetrations etc.including winding-up; 3D welded assemblies including BOMs, 3D mounting assemblies including parts lists


2 Laser cutting 2D (laser cutting)

 steel up to 20 mm / stainless steel up to 12 mm / aluminum up to 10 mm / profile tubes
 Other materials on request

High cutting speeds, perfect quality of the cut surface, unmanned production - so looks effective work!

 automatic loading and unloading
 panel size to 1,500 x 3,000 mm / plate thickness 0.5 to 20.0 mm

3 We bend the go!

 Bending with up to 220 tons pressure
 bending length up to 4,000 mm depending on material and thickness (sheets up to 20 mm)

From a small angle to the complex machine cover - Form-fitting, sheet metal stamping for your product!

Our manufacturing principle ensures fast setup time even with individual productions - Probekantungen completely eliminated.

Some like it around! We roll sheets up to a thickness of 3 mm!



4Welding: welding MAG, TIG welding process, welding process MIG; desired with inspection certificates; components and assemblies processing; small, medium and large series


5 Installation and Service preliminary and final assembly of modules: Delivery, on request, a separate surface treatment (galvanizing, Powder coating, painting, sand blasting, etc.) are offered with

The “PROMMING Čakovec” company was founded in 1990, and has developed to one of the leading manufacturers of store and warehouse equipment, as well as office furnishing in the domestic market. The company currently has a workforce of 120 people, out of which a 100 people work in the production process.Production program of the company covers a very wide area - equipment for shops and warehouses of all the capacity and purpose, and interior equipment.

The metal processing line covers a wide range of production processes in metal fabrication:

1.the sheet metal slit is done on the automatic line for both the longitudinal and lateral slit which is dimensionally adapted to the needs of further processing, whether it be profile fabrication for warehouse systems or equipment positioning for stores

2.the cutting out of position layout is done on CNC machinery and on the laser cutter; this technology represents the very top of metal processing and enables us to manufacture various shapes and forms, with maximum production flexibility concerning dimensions and quality service

3.the sheet metal is bent on the whole series of machines adapted so we can cover all market needs – from individual positioning to serial production:
the line for continuous bending of profiles represents our base technology, and is used for:
manufacturing of profiles for all warehouse systems; those lines continuously produce profiles cutting them to the appropriate length, specified by the customer
manufacturing of shelves and trade system equipment backgrounds, which has high rate of production, while still staying flexible on the level of each product
bending on the sheet metal benders is used in cases of small series with high flexibility in position measurement
bending on the CNC bending machine
wire products are produced on the CNC machine
the welding of positions is done both by welding robots and manually:
the welding robots are used for position manufacture of our warehouse program, meaning all positions which are produced in large series; this technology ensures production of high quality identical positions
manual welding is done by qualified welders with longtime experience in manufacturing warehouse and store equipment

The final position processing is done in our facility by electrostatic plastic or Zink coating; both processes are done on separate lines taking care of both the high quality of final processing and ecological ethics:
the plastic coating of positions is done on two separate line which enables a capacity of manufacture; the process of plastic coating consists of chemical treatment and preparation of the positions for the painting which is done by robot, after which they are baked in flow ovens; the paint is applied in special booths which enable color switching within 10 minutes, further ensuring a broad range of colors of our products; the heating of the lines is done by warm air heated by an oven fueled by biomass; the bake oven uses thermo oil as a medium, which is a new technology developed for our purposes; this technology ensures the energy for all our processes – from the plastic coating lines

WELCOME



Since 1.07.2010 manufactures the Proton GmbH as an independent company, with a dedicated base of employees, machined components as a subcontractor in the areas of: equipment, fixtures, injection molds and stamping dies.

Based on extensive know-how and long-standing customer relationships supplies the proton GmbH customers worldwide.

On 01.07.2010 the proton GmbH moved into its new premises in Kißlegg in the industrial park at the station.

COMPANY



The proton GmbH specializes in the production of equipment for industrial production. From the construction, and parts production to finished facility, as well as plastic processing all common manufacturing processes are covered with different materials.
These services range from simple processing to co-development of system components, production systems and manufacturing processes.

Our customers are companies of various industries such as electrical engineering, mechanical engineering, tooling, special purpose machinery, plastic industry, food, medical, construction, etc.

With precise technology and the many editing options proton GmbH, guarantees an experienced and qualified team of employees with a comprehensive processing from a single source.


MACHINERY



CAD: 4x SolidWorks 2011
CAM: 12 jobs 2.5 - 3D milling and wire cutting

Saw
5x turning up to 250x1000mm
10x milling up to 1000x660x600mm
1x Milling 5 triaxial diameter up to 650
Hardening
4x flat grinding up to 800x400
2x cylindrical grinding, to 250x400
Jig Grinding
Die sinking
Hole EDM
Wire cutting
3D measuring machine 500x600x400mm
3D printing in ABS and various colors

3x injection molding to 250t clamping force
Screw press
Tox 4-column press type MAG 80kN
Hydraul

Purchase Turkey is a project management and purchasing company for European market in Turkey. Our strategy and target is the best quality,cost and timing for customer needs. We have 6 years experience in purchasing and project management for automotive and other industries. Our main experience are stamping,casting,machining,plastic and rubber enjection etc.
Other proficiencies are tooling,control fixtures,machinery, assembly lines etc.
We have 8 experienced suppliers for all production methodology.

The QP Plc started his production at 1993 in Győr, one of the economically and technically most advanced regions of Hungary.

In 2001 and 2009 our Co. realised significant capacity and technology improvements.

The QP Plc. has been specialised on the engineering and production of specified mechanical equipments, high precision machines and machine parts. The QP Plc. also produces serial products requiring high technical standards.

Having specific questions and requirements, please don’t hesitate to click on our Contacts, where our experts, technical and sales can offer you flexible solutions.



Our main profile:

* machine parts
* machine-building parts
* different mechanical, hydraulic, electronic equipments
* production equipments (welding equipment, mounting equipment)
* specific equipments, engineering and production, tooling centres
* tool production
* 3D tooling, incl. oversized parts

Production of small stamping parts and turning parts.