We are your competent partner for:

Punching and bending (steel, aluminum, stainless steel, etc.)
Bending and punching of profiles
Riveting, pressing and assembling
Spot welding
Vibratory grinding of aluminum parts

Whether from the coil, as a sheet metal strip or as individual pieces, our presses with up to 1600 kN press force enable us to develop parts according to your requirements and to manufacture.

The required tools are designed and manufactured by ourselves. We have experience in punching and bending of the following materials:

Steel
Stainless steel
Spring steel
Aluminum
Brass

In addition, we have built special cutting tools for cutting rubber gaskets and finished the series for the customer.

We specialize among other things, by writing custom benders to ensure wrinkle free bending with different radii. Of course, the profiles can be finished according to your wishes (punching, deburring, punching, drilling, milling).

Each procedure of profile bending brings very specific requirements with them, so we are happy to assist you early in your project with the creation of prototypes and samples.

From prototypes to small series to series with more than 500,000 parts per year, we are happy to offer us as your partner and supplier and look forward to successful cooperation.

Get in touch with us.

Translation by Google Translate

Quality engineering for high standards.
Products from Anton romp Maschinenbau GmbH are used in various areas and in individual execution.
All our products are subject to a high quality standard.

Quality and precision are our products.
Short set-up times, rapid changeover to the conditions are the basis for the high performance and efficiency of our company.
Products by Anton romp Maschinenbau GmbH serve the highest quality and advanced technology requirements, in which the Preis-/Leisungsverhältnis is consistent.

Since February 2008, our company is certified according to DIN ISO 9001.

Special customer requirements we of course welcome. To do this, contact us.
We appreciate your interest in our company!

Manufacturing techniques

• CNC Turning: For diameters up to 1500mm * 800mm
• CNC Turning: Up to 540mm diameter * 3000mm
• CNC machining centers: 6000mm * 2000mm * 1500mm
• gears Ø 300: Up Module 12
• rack: up module 30
• Grinding, Hardening, chrome plating, galvanizing etc.can be offered in collaboration with various established companies.
• Machining parts are deburred and treated with rust protection.
• Welding process: arc welding, MAG, MIG / MAG
• Presses (bending, stamping, edge)
• Sheet metal parts up to 2000 x 2000 x 10mm rollers
• Cut parts to 6000 x 4000 x 120mm
• Sandblasting and bending of sheet metal can be offered in collaboration with various established companies
• Welded components are deburred, and cleaned depickled
• KTL painting
• Powder-painted, etc.

Customer requirements

• CNC machining according to customer drawings
• Production welding according to customer drawings
• Investments to customers' requirements
• Consideration of requests for changes to the workpieces outside the series production, or custom-made.
• Immediate implementation of new welding processes, as well as
• supplementary welding tests
• Maximum flexibility and absolute punctuality
• Final coat according to customer specifications
• Packaging according to customer specifications
• delivery on request free house by our own vehicles.

Internet:

• www.maschinenbau-toben.de
• www.maschinenbau-toben.com
• www.zerspanung-toben.de
• www.a-toben.de

Special customer requirements we of course welcome.
We appreciate your interest in our company!

We are a company that has been a supplier for well-known companies of various industries for years. These include:

• Mechanical engineering • Special process equipment
• fixture • Food industry

In modern CNC machines we manufacture according to customer requirements, Präzisionsfräs and turned parts. Thanks to our own Locksmith machine parts to be welded and completely finished here.
For the various welding tasks the respective suitable welding process TIG, MIG, MAG and E is applied. We place the highest value on meeting the expectations placed on us, right quality and of course on time.
An individual and personal customer service before, during and after the project implementation belongs to us the company's philosophy. Our strengths lie in the manufacture of individual parts and series parts in small to medium batch sizes.

PRESENTATION OF THE COMPANY APEX 11

Company Apex 11 is founded in 1991.
Initially, the company's activity is repair, service and recycling of forklifts, trading of spare parts for forklifts. The main market is Russia and former Soviet republics.
In 2003 the company purchased its own property with a total area of 8 ha (of which 6 ha are built).
The accumulated experience over the years by professionals - engineers, technologists and
constructor - creates conditions for innovative developments in the company.
In 2004 the design department develops its own model trucks, Series A, in the capacity range from 2,5 to 8 tons.
In 2005 the company was chosen by HYUNDAI WELDING as official and exclusive dealer of welding consumables HYUNDAI. So far, Apex 11 successfully imposes their products on the Bulgarian market and gain a substantial share of trade in welding consumables.
Apex has 11 shops and dealers in some major cities in the country. The company is able to be a dealer of a variety of new products or brands on the Bulgarian market.
In 2006 in Apex 11 has been designed and manufactured a prototype of the four-way forklift truck with the name A-Lift.
After a year trial the company started a regular production of A-Lift in the range from 3,5 to 8 tons.
Currently we are looking for distributors worldwide.
In 2008 the company was approved by the European Commission for funding for two programs related to technological innovation and modernization of machinery.
We purchased modern, high-tech machine tools (lathe, milling machine, bending machine, welding machines, electric hand tools).
At the same time in the company had introduced systems for:
- Quality Management ISO 9001:2008
- Environmental Management ISO 14001:2004
- Health and Safety at Work ISO 18001:2007,
where the company holds certificates.
All this ensures speed, quality and reliability of manufactured products.
Machine park at the time of the company include:
- Lathes
- Milling
- Radial drilling machine
- Drilling machine console
- Coordinate machine
- Grinding of crankshafts
- Welding machines
- Hand-held power tools
- Hoists with tonnage up to 5 tons
For all other operations, we use the services of outside contractors.
Company Apex 11 has capacity to produce parts, components and machinery relating to the mechanical processing of metals, welding and assembly works.
Anything can be met by documentation of the client or constructed in Apex 11.
We will be happy to make contact with partner companies, to which we
can be useful by our experience and technological capability.

We would like to offer you our free capacity:

for producing plastic parts or parts moulded with inserts
for assembly of these and other parts
for execution of complete projects
for product development

Our company delivers into the following industries:

Automotive- (50%), electronic-, building-, furniture- and several other fields of industry (Suzuki, Audi, BMW, Bosch-Rexroth, Knorr, Electrolux, Philips….)

Turnover: over 2 million €
Employees: 55 persons

Activities:
· technical plastic moulding on Arburg, Engel, Battenfeld Machines up to 200 tons &
607 shot weight
· main materials : PA, PBT, PC, PVC, TPE, TPU, PVDF (similar to teflon), POM, PP…
· Toolmaking
· Assembly
· Cabel-head injection (Hotmelt-Technology)
· Ultrasonic welding
· Insert moulding (plastic with metal, electronic….)
· Prototyping
· Tampon printing wit 2 colors

Specialties:
· moulding into the parting line up to 85 tons
· vertical moulding up to 50 tons
· thermoplastic rubber injection (TPE, TPU,TEEE, SBS, SEBS…)
· plastic injection with fluor content (similar to PVDF)
· PVC coating also in small series on different parts (e.g. on handles…)

Our latest developments:
Implementing Bar Code ERM System
new 1000 m2 warehouse

It would be a great pleasure for us, if we could work together in the future in some way. Would you have a project, for which you would need plastic parts, we stay at your disposal at any time under the address below.

Engineering
industrial fans
blower fans
anti abrasion products
wear plates