Together with my 8 suppliers located in Turkey, we are supplying mechanical parts for our customers in Denmark, Sweden, Netherlands and Spain since 2014. We are currently working for more than 10 customers in Denmark, 7 customers in Sweden, 1 customer in Spain and 3 customers in Netherlands.


I work for my suppliers as their business development manager to manage the commercial and technical communications and business relationships with the customers and know my suppliers for more than 10 years. My suppliers send their invoices to customer and payments are made directly to my suppliers. I am paid by my suppliers only.


Thanks

Msc. Mechanical Engineer and Purchasing Specialist


Product groups:

*Machining parts (Bar turning, milling, turning, grinding)

Material grades:

Carbon steels (1020, 1040),

Case Hardened Steels (8620 - 21NiCrMo2),

Alloy Steels (4140-42CrMo4)

Structural Steels (S235, S355)

Aluminum (1000, 2000, 5000, 6000 series)

Brass (Ms58)

Stainless Steels (AISI 303, 304, 316, 316Ti, 430, 630, Duplex)

Fine Grained Structural Steels (HARDOX, STRENX, DOMEX)



Heat Treatment Processes:

Tenifer QPQ, Nitriding, Case Hardening, Induction Hardening



Surface Treatment Processes:

Electro and hot dip galvanized zinc coating, wet and electrostatic powder painting, phosphate coating, natural and hard anodizing



*Sheet metal parts (die forming, fiber/CO2/pipe laser cutting, plasma cutting, bending, welding, painting, surface treatment)

Material grades:

Structural Steels (S235, S355)

Hot dip Galvanized Steels (DX51D-Z275)

Spring Steels (Ck75)

Aluminum (1000, 5000, 6000 series)

Stainless Steels (AISI 304, 316) (With/without brushing)

Fine Grained Structural Steels (HARDOX, STRENX, DOMEX)



Surface Treatment Processes:

Electro and hot dip galvanized zinc coating, wet and electrostatic powder painting, phosphate coating, natural and hard anodizing



*Casting parts (machine and hand molding)

Material grades:

Iron Castings (Gray-GG25, Ductile-GGG60)

Aluminum Castings (AlSi8Cu3-A380-Pressure die casting, AlSi10Mg/-Gravity die-sand castingAlSi7Mg

Investment Castings (Carbon Steel, Stainless Steel)



*Aluminum extrusion components (anodized, cut, machined, etc.)

Material grades:

Aluminum (6000 series)

*Transmission components like gears, racks, pinions, splines and sprockets

Material grades:

Carbon steels (1020, 1040),

Case Hardened Steels (8620 - 21NiCrMo2),

Alloy Steels (4140-42CrMo4)

Structural Steels (S235, S355)

Aluminum (1000, 2000, 5000, 6000 series)

ELFE, s. r. o., located in Krnov in the Bruntal region, was founded on 1 February 1993; it is a Czech private enterprise. The beginning of the firm is connected with the dissolution of state enterprises and the creation of state joint stock companies and limited liability companies. The manufacturing company ELFE, s. r. o. seized these opportunities, acquired business contacts in new foreign markets and started production of machines and equipment components for them.

CONCERN MEMBERSHIP

ELFE, s.r.o. is a member of concern, whose members are companies ANACOT CAPITAL a.s. (IČ: 268 40 529), Norasota a.s. (IČ: 294 46 848) a NEW ELFE, s.r.o. (IČ: 047 64 978).

REFERENCES

The company’s activities involve many industries. At present, we are primarily focused on offshore & mining. 98 % of our production is exported, mostly to Norway and the USA.

Elka has evolved from the design and production
Transport and storage containers specialized.

Elkas produces innovative pallets, containers and special racks
for optimal storage and safe transport.

Elka's offers an extensive range of standardized container
and pallets for universal use. Through a rational
Volume production of our proven products at a
favorable price-performance ratio offered.

Does the Elkas standard program not an adequate solution, develop
our technicians according to the Anfroderungen a special charge carriers.

ELKUCH - From development to assembly

The Elkuch Group presents a full service with the most modern and diverse

possible applications. We have grown from a sole proprietorship to a successful group

The best of sheet metal

We work for mechanical engineering, the food industry, rail vehicle construction, the plastics industry, the construction industry, chemistry and other areas. We manufacture individual components or entire systems using high-quality sheet metal processing.

All you have to do is let us know what you want.

As a full-service supplier with comprehensive know-how, we support you in every phase of a project. We do constructive basic work. You benefit from the latest findings in design. You are up-to-date when it comes to choosing the most effective manufacturing processes. You will appreciate the advantages of our finishing methods. We guarantee adherence to deadlines, which gives you absolute security for your production processes

The Elkuch mobile AG implement tailor-made products for the industry, must comply with the highest quality standards as well as environmental and economic conditions and specific technical requirements. The know-how of its Dienstleisungspalette ranges from value engineering, design, construction, fabrication, pre-assembly, packaging and rapid Leiferungen, to the assembly by the customer.

ELMA TT, P.l.c. produces one and three-phase dry type transformers in the power range from 0,5 VA up to 630 kVA for nominal voltage up to 10 kV with different protection (IP00 - IP53). Our production programme comprises all kinds of reactors up to 2000 A of nominal current; all kinds of standard magnetic laminations and plastic bobbins are used in production. The products of high power range and current are produced according to the company`s standard sizes and dimensions.

Most of transformers and reactors are produce according to custumer`s orders and requirements. The products of ELMA TT not mentionet in cataloge could be produced to costumer`s requirements.

We are offering:
- Welding
- ...
- ....

Supplier stamped and bent parts. We supply any quantity of the small series to large quantities.
Everything from one source - We are solution providers, ie, we assume from the design to the assembly of all manufacturing steps, such as surface printing procurement of foreign parts.

Elmet Group is present on the Romanian market since 1994. The two companies within the group are: ELMET GROUP and ELMET ELECTRIC.

The results obtained so far have shown that we are an extremely competent partner with a team of trained specialists.

ELMET GROUP Fieldsof activity

The main services provided by our group of companies are design and execution of electrical applications of any type, as well as supply electrical, technical materials and equipments, metal confections on Trumpf CNC machines. ELMET GROUP executes any type of custom metal parts, but also a wide range of standardized products.

Among our clients include nationally and internationally prestigious companies as: Legrand, Thales, OMV, PetromService.

The company demonstrates its seriousness and professionalism by winning numerous national tenders, as well as through participation in various nationally and internationally fairs and exhibitions.
It has the following endowments : TRUMATIC 2000 ROTATION, is a machine designed for punching, nibblingand forming of flat workpieces. It can be processed pieces from steel, aluminium and stainless steel with thicknesses from 0,6 mm up to 6 mm. Sizes of processed pieces are maximum 3000x1250 mm. The tool stations in the magazine of the TRUMATIC 2000 ROTATION are located in fixed positions.11 stations are available.Two of the magazine stations must be occupied by clamps.The clamps can be positioned to any of the magazine stations


TRUMABEND V130 press brakes for bending sheet is ideal for economicaland flexible bending pieces,.It has the following endowments : Tonnage : 1300 kN ; Bending lenght :3060 mm ; Operating height : 1050 mm ; Max. speed of travel in R : Max. speed of travel in X : 500 mm/s


TRUMABEND 5085 pressMax. speed of travel in Z : 1000 mm/s 300 mm/s brakes for bending sheet is ideal for economical and flexible bending pieces,.It has the following endowments : Tonnage : 850 kN ; Bending lenght :2720 mm


TRULASER 3030 Working range 3000 x1500 x115 mm Laser unit : CO2laser TruFlow 2000 Laser cutting head with 5" lens and laser cutting head with 7,5 " lens Guillotine


TRUMACUT E1030.It combines the cutting quality with the using facility .Many technical details included in that guillotine contribute in obtaining a maximum efficiency and productivity.It presints advantages such as: Gap between the knifes automatically adjustable ; Electronical system of verifying the stopper position ; Setting the cutting lenght ; Side stopper for sheet and holding bolster on front size ; Cutting capacity: 10mm Max cutting lenght : 3050mm


MIG /MAG welders. Powder-coating electrostatic system for finishing surfaces.2 caninets with maximum sizes for pieces :2800X1500X1200 or 4000x1500x1150.


The high quality of finishing and out standing consistency of power coating and wet spray performance achieved by our paint shop is tthe result of the Elmet Construct policy of investing in modern equipment.We can offer metal plating, galvanising & zinc coating carried out by local specialists.

We mention some pieces that are processed with our endowments: Cable support systems, cable trays systems and cable ladder systems ; Cabinets, lockers, metal shelves ; Working and movable tables of various dimensions, metal furnishingsfor shops ; Hidrants box ; Various processed pieces from inox sheet , working tables ;We can assure complete services, including the pieces design and execution in correspondance with the sketches received from the costumers. We assure the shortest time of the answer to your request ,and the best quality price rapport .

CONTRACT MANUFACTURING (OEM) OF ELECTRONICS (SMT MOUNTING) - EMS,
PRECISE MECHANICS (LASER CUTTING, PUNCHING, BENDING, PRESS FITTING, WELDING),
MEDICAL AND LABORATORY TECHNICS,
HEAT PUMPS, HEAT RECOVERY
AND HEATING SYSTEMS