GINO OLIVARES is a company specialized in the production of sintered components.
The company does not only undertake the design and production of sinter components, but also produce all the tooling and dies necessary for their manufacture.
GINO OLIVARES exports to 22 countries and provides its users with complete assistance in order to resolve all technical and design requirements, therefore ensuring the most efficent use of sinter.
The company currently have over 35 presses of 4 T. and 350 T. capacity, 3 sintering ovensas well as 2 burnishing and vaporization ovens.
We also have a quality control lavoratory equipped with modern instruments for cheking both dimensions and mechanical properties of the products.

At five locations in Germany
Herzberg am Harz
Stuhr near Bremen
Norderstedt near Hamburg
Reinberg in Saxony
Thale in the Harz Mountains,
leads the group HEAT heat treatment on a broad range of technologically
sophisticated products through. Clients come from the aviation and aerospace industry, the automotive industry and in mechanical engineering.

Heat treatment on a large scale and important contributions to the optimization of the performance features delivers the HEAT Group for the automotive industry in the areas of:
- Passenger restraint system
- Diesel injection systems
- Suspensions
- Drive Technology

About us
With our industry expertise, we can help you successfully and promptly implement your production project for mechanical components, assemblies, and housings for small to medium-sized series.

For more than 20 years, we have been experts in die casting, injection molding, and other mechanical processes. Our focus is on cross-process thinking.

In Germany, Europe and Asia (in-house certified production) we manufacture your mechanical components, assemblies or housings.

Our manufacturing services include:

Engineering: Technology consulting (wide range of materials and manufacturing processes); CAD evaluation, construction & development

Prototyping (close to series production; 1,-3,000 pieces) for die casting, injection molding, precision casting, sand casting, PA casting, vacuum casting, CNC milling, SLS & SLY

Series production for batch sizes of up to 25,000 units

Metal: aluminum die casting, zinc die casting, deep drawing, gravity die casting, sand casting
Plastics: injection molding, thermoforming, extrusion
Our Services:

Project-related surface finish
Coordination of the entire production project
Advice along the value chain
Assembly service, measurement reports
International logistics service

The company manufactures hanf and erdmann for 20 years precision turned and milled parts.
Most modern programming and production technology to high-quality equipment, with its own delivery service.
Volume production and prototypes, also Kleinsereien.

As a manufacturer of high-quality machine components the habö CNC turning and milling technology has been operating successfully as a reliable partner in the industry since 1989. From the beginning, two employees of the production company has grown rapidly into a modern, medium-sized companies with over 100 employees. On a production area of 3400 m2, located in the North Hessian town of Rosenthal, habö manufactures customized parts and complete solutions for wide-ranging applications.

Its customers include the company habö internationally renowned medium-sized companies, major German companies and international corporations who defended the manufactured items worldwide. In this case, these parts are also in vehicles or airplanes, as well as components for mounting sensors or pressure machines to customized special equipment again. You can almost be sure that they have already used a product or machine, in which a piece of "habö" was located.

The development department of habö CNC turning and milling technology takes care of all problems in the field of metal processing and developed as well as individual solutions for you. In addition, a very successful self-products are developed, such as the already multi-award winning ISS - Internal clamping screw.
In order to reduce the time needed for the development and design relevant and to keep the process and costs as low as possible, sets habö taking advantage of synergies with other Group companies ultra-modern CAD systems and continuous new investment in machinery. In conjunction with the continuous education and training of its employees habö ensures the consistently high quality standards for the future.
Consequently, at habö the social responsibility of the company and its employees has a special value, which has proved not only the thanks for the high proportion of trainees by the Hessian Minister of Economics in 2007.

Together with the partner companies of the group böhl We provide them a probably unique in the SME range available. This comprehensive offering, böhl group referred to as "system house metal".


Below is a small selection of already-produced goods:

Secondment, axle, adapter ring, system logs, connection shoe, welding face, bayonet head, bayonet plate, roll of tape, base plate, bolts, brake disc, torch body, bushing, collar and plain bearings, cover, seal sleeve, spacer ring, pressure plate, adjusting, Eisventilkörper, eccentric, eccentric shaft, spring case, spring camp, flat stone, flange, flange bushing, guide, fork, seat ring, housing, pivot screw, sliding ring, retaining ring, lever, lever arm, heating nozzle, heat conductors, cap, catch, block, piston, pin, converter sleeve, crosshead extension, cooling mandrel, slide block, coupling ring, connecting rod, cam blank, labyrinth ring, Lagerflans

Soldering technology & heat treatments

Vacuum soldering, inert gas soldering, induction soldering
Annealing under vacuum and protective gas
Manufacture of complete solder assemblies

Lohnhärterei
Heat treatments according to various methods, such as. For example, case hardening, carbonitriding, tempering, annealing, nitriding, induction hardening, vacuum hardening, etc.
Other: Materials and failure investigations, straightening, blast cleaning, shot peening, delivery service with our own fleet

The fulfillment of orders and the understanding of the tasks assigned to us are the basis for the satisfaction and success of our customers.

It is our task and challenge to continuously develop further, to recognize requirements at an early stage and to develop innovative and future-oriented solutions.

Due to our many years of experience in dealing with our extensive machine park, we are able to process individual orders according to customer specifications.

Contact us. Together with our customers, we work out individual solutions in order to manufacture a product based on their drawings.

Haselbauer GmbH
For CNC laser cutting and industrial sheet metal processing

W0 - approval according to AD 2000 / TRD100
Re-stamping certificate
Glow certificate

We manufacture installation or storage-finished machine parts according to drawings or samples from all machinable materials. Furthermore, we produce almost any type of gears, milled, or ground encountered. The respective wheel center can be delivered or made by us.

Due to our high manufacturing depth which the complete mechanical processing (such as turning, milling, grinding, eroding, clear) covering, a fast and inexpensive for you to order processing is guaranteed. Quality, on time delivery and customer satisfaction are important cornerstones of our corporate policy. All the work we carry out in accordance with DIN EN ISO 9001.

One of our strengths is the fastest Production of repair parts, which is ensured by a high flexibility of our employees.

Emerging from a locksmith, founded in 1946 in Wattenbek (Schleswig-Holstein) has the Henning Dierk machine and Appparatebau GmbH due to the constant development and expansion of its manufacturing technologies over the years to become a powerful medium supplier for sheet metal parts / metal parts and assemblies mounting developed, as well as competent and reliable partner, flexible now divided into two production sites.

To produce high quality sheet metal parts and assemblies a team of experienced and motivated employees is at the Henning GmbH Dierk next to a modern machine park requirement. The long-term and clear corporate philosophy helps that customer requirements are fully met in close cooperation with our customers and suppliers.

In the center of all our activities for decades is the customer and their satisfaction. Our aim is to offer cost-effective solutions for our customers, thath short manufacturing and delivery times, a fair price / performance ratio and a consistently high quality of production.


This is exactly where our strengths lie.



Take advantage of it!



We look forward to your projects.



We supply to customers from different industries such as
- Machinery and equipment
- Interior Finishing
- Warehouse
- Ventilation and Klimabau
- Electrical industry
- Medical Industry
- Authorities

Materials
- Steel
- Stainless Steel
- Aluminium
- Copper
- Brass
- Plastic

The quality requirements for products in consumer and investment goods sector continue to rise. That means more durability, longer service life and optimized finish for parts, assemblies and components. And so exactly the right job for H + K. Because with over 30 years experience and full-service solutions in all the hardening process, we offer the best quality and most economical solution for each batch.

The H + K product portfolio includes the method hardening, vacuum hardening, gas nitriding, salt bath, carbonitriding and tempering as well as galvanic surface treatments.
Modern systems, innovative process technologies and skilled staff guarantee that the increasing quality requirements are met on time and every day.