Koch-CableTec GmbH was founded in 2009 as the sole proprietorship of Stefan Koch and was restructured as private limited company in 2011 following strong growth. Stefan Koch is the sole shareholder and managing director. From the outset, our company specialised in the development, design and construction of extremely high-quality manufactured cables, control units, electromechanical modules and control cabinets.

If required, we will also support our customers through all stages from development, technical drawing and prototyping to series production.

Thanks to our steady growth, not only has the number of employees increased over the years, but our fleet of machinery has also expanded. We therefore have the flexibility to cover cross-sections ranging from 0.08 mm² to 75 mm² and manufacturing lengths from 15 mm to 7000 mm.

Our product range extends from single wiring harnesses, vehicle wiring systems, complete vehicle wiring harnesses and control units to single wires and wire sets for a number of sectors.

Metal working in the areas of milling, turning, wire EDM, welding.

Kolada Feinwerktechnik is a modern, responsible family company with a wide range of services and a good working atmosphere. Since 1998 we have been working with competence and responsibility not only as a supplier of turned and milled parts but our tasks go far beyond the mere delivery of technical components.

Due to the constantly growing machinery and the steadily increasing order volume, the move to our new production and administration building in Kaltenkirchen took place in 2015. On an area of 900 m², we manufacture high-quality precision parts for the aviation, medical technology and automotive industries with our experienced and qualified employees. Our company has extensive experience in processing a wide variety of materials and a wide range of manufacturing options.

Our state-of-the-art machinery and our CAD / CAM systems ensure the best conditions for the production of customized and tailor-made parts. In our component assembly we assemble precision parts made of different materials into ready-to-install components. We have been working with competent partners for additional surface treatments for years.

The satisfaction of our customers and adherence to delivery dates are our most important corporate goals. Qualified and competent advice round off our service concept perfectly.

We are company situated in the North-East of Czech Republic. We produce metal pressed parts for automotive industry (Wolkswagen, Skoda, Bentley, Continental etc.), stampings for electrical industry (INVENSYS), various building fittings, metalwork according to drawing documentation, production of tools and preparations. We are holder of ISO 9001:2000, ISO/TS 16949:2002, ISO14001 and OHSAS 18001. For more information about our company look at http://www.komas.cz

KOMOS GmbH: Your product idea becomes success.
KOMOS is an industrial service provider with the highest standards of product and service quality. For more than three decades, the company has been manufacturing high-quality products made of metal, plastic and composite materials, also in combination with electronics and electrical engineering, on behalf of customers with a competent team and modern machinery. With its hybrid technology network of stamping, turning, forming and injection moulding, in-house research & development, assembly and packaging and many other services, KOMOS can realise almost any product vision at the highest level.

Innovative with a system - for more than 30 years:
At KOMOS, a 2nd generation family business in Bürgel, 75 employees develop and manufacture high-quality products for the medical technology, automotive, electronics, aerospace, construction and mechanical engineering sectors. The claim is always a long-term trusting partnership with the customers - for successful products, guaranteed 100 % Made in Germany. https://www.komos.de/unternehmen/

Production technology follows function.
Punching and forming, plastic injection moulding and CNC turning, processing of plastic, metal and composite materials: KOMOS offers an extraordinary manufacturing breadth and depth under one roof in its unique hybrid technology network - together with its own R&D department, assembly, packaging, logistics and much more. In this way, it is not the technical possibilities but only your requirements for your new product that decide on the manufacturing.
Learn more about our manufacturing technologies! https://www.komos.de/fertigungstechnologien/


KOMOS product strategy. Success for you.
At KOMOS, we are open to your ideas and visions - and always ready to transform them into market-ready products with full commitment. This is done using a consistently applied methodology: from understanding your product idea as part of a non-binding initial consultation, through technical anamnesis, rough concept with proposed solutions and fine-tuning, to precise production and further processing. https://www.komos.de/produktstrategien/

We are a medium-sized company in Schramberg-Sulgen, Baden-Würtemberg.
Our offer includes:

Assembly
Working around the assembly of components as part of the process or of complex processes.

Outsourcing
Flexible outsourcing service, which is currently also be accessed at Notfällenund load peaks.

Contract Manufacturing
Timely and impeccable quality for manual assembly work to relieve your own employees.

Bearing capacity
Our heated storage capacities in the Black Forest include about 2,000 m² of space.

Machining of metals and non-metals up to dimensions of 4 mx 2.5 m.

We are a company providing industrial services and solutions especially in the areas of cutting, bending, rolling, welding, machining, surface treatment, assembling, electrical connections etc.

Satisfied customers are the best proof of our successful work.

We produce everything in-house. In this way we guarantee a quick project flow, even if it takes a little longer.

Our range in metal construction is broad. We advise you individually, also on special requests and implement them efficiently and with experience for you.

And everything that we cannot do, our qualified partners can!

konstrutec - We construct technology - we combine twenty years of experience with a young, innovative team.
Our core competence is mold and tool making. But we also see ourselves in equipment and fixture construction as well as in the contract manufacturing of turned, milled and precision parts. Here our main focus is on individual production up to small series of 10 to a maximum of 150 pieces. The control cabinet and control construction round off our services.
Our location in Lower Bavaria offers us a very good network of excellent suppliers and a high level of training and further education opportunities for our team.
We would like to use our many years of experience, preserve proven structures, expand our know-how with new innovative ideas and modern production and constantly improve ourselves in order to offer our customers the highest level of quality, delivery reliability and economic efficiency.
We consciously forego our own products in order to make our knowledge and our range of services available to our customers in full. Trust and secrecy are a matter of course for us.