We are a company founded in 1987 in Iffezheim, owner-managed company and are dedicated to the industrial contract manufacturing. Schneider & Gemsa provides specific and professional solutions for customers in the automotive, industrial, electrical, electronics, renewable energy, electric automotive, telecommunications, and medicine. The range of contract manufacturing ranges from the single production of the construction group production through to complete production of devices and complete system solutions. With our locations in Germany, the Czech Republic and Romania, but also through cooperation in the Far East, we are able to offer cost-optimal solutions and market-based performance. Through our collaboration with a supervised workshop for disabled people, we take our social responsibility seriously. Schneider & Gemsa has decades of expertise in the fields of mechanics, electronics and mechatronics.Since its founding more than 150 million electric linear actuators, mechanical and electrical assemblies and terminals were manufactured. Moreover, in a modern wire strands, data control cables and wiring harnesses with innovative technologies and modern machines and tools are manufactured. Our manufacturing priorities include eg • Manual assembly with safe processes • Semi-automated assembly • Fully automated assembly • assembly of complex devices • harnessing of single lines • production of cable harnesses and wire harnesses • Manufacture of measuring and test leads • cabinet • preparation of the required equipment, tools, test and Manufacturing facilities As a system supplier we can therefore offer all manufacturing services that are needed by the product design. In addition, we offer all the necessary consulting and implementation services in connection with manufacturing outsourcing and production relocation. We consider quality as an integral part of all activities and strive for continuous improvement in all processes. The company operates according to a quality management system according to the standards of DIN EN ISO 9001-2008 and ISO / TS 16949:2009 (Automotive) certified. As of May 2012, we will certify our environmental management system according to DIN ISO 14001:2009.

More than 50 years of experience in tool production. Specialized in plastic injection and sheet metal forming tools 55 employees 80% automotive industry 50 new tools a year Manufacturing of hard steels in the range of 1500x700x600 Maximum tool weight 5 tons

As an up-and-coming steel and sheet metal processing company, GB is known for fairness, speed and delivery reliability. The aim is to further improve the quality, efficiency and reliability of production through constant further development.

TERNPLAS was founded by Ergün Toprak, a native of Baden-Württemberg in Germany, and with his German industrial expertise in the automotive industry, he runs the production site in Ankara / Turkey with enthusiasm. TERNPLAS supports its customers with technical and manufacturing innovations. With unparalleled technological expertise in machining, mold construction and plastic injection molding, it is a proven supplier of high-quality and complex parts as well as development and service partnerships for customers in the automotive, medical, defense and general sectors. As a development and service partner, Ternplas accompanies its customers in the selection of design and materials and, through close, professional exchange, achieves the best solutions and cost-effectiveness. Ternplas produces worldwide for its customers with the most modern machines and systems with efficient, high quality and robust processes in series production. We make our important contribution to the continued success of our customers. Our customers appreciate and benefit from our lucrative services from development, series production to logistics with advantageous production costs in Turkey. "The key to our success is the success of our customers"

CNC milling and turning: several new-generation machining centers are available. Degree of class complexity and precision determines the client. We are able to produce parts from nearly all materials - aluminum, steel, copper, brass, stainless steel, plastic

Consulting, development and production of means of production, machines and components from engineering to manufacturing detail to the complete system, we assume responsibility for the project. Sheet metal working: Your manufacturer of precision parts, assemblies, and partner for complex manufacturing solutions in sheet metal processing. The flexibility of the plants, together with the creativity of professionals enables new solutions. Manufacturing noble parts: Design and fabrication of components, series and pre-finished assemblies including post-treatment, logistics and functional test. Sharpening and Rental Service: The sharpening of ABB is your guarantee for cutting tools of the highest quality. Both the sharpening of standard and special tools, as well as in the procurement of new tools you need to make any compromises. Our rental services for measuring instruments, standard and special tools offers a wide selection at very attractive terms.It is much more economical for you to rent from us than to buy rare and short-run and manage resources. These include in particular oversized tools and measuring equipment that you can find and hire. Heat treatment: The services offered by the heat treatment comprises the traditional methods such as annealing, hardening, tempering in an open atmosphere, an inert gas or vacuum. In addition, we offer special techniques such as nitrocarburization, an environmentally friendly surface hardening process, with impressive characteristics, as well as the necessary pre-and post-treatments. A unique service we offer regarding expertise and infrastructure in the tempering of aluminum alloys. Translation by Google Translate

Thermoforming, thermoforming, vacuum forming, vacuum coating, Plattentiefzug, Rollentiefzug, forming, plastic thermoforming, rotation, rotational molding, rotational molding, rotational forming, Rotoationsgiessen, rotational molding, finishing, plastic finishing, CNC milling, 5-axis machine, mold, mold for thermoforming tools, thermoforming tools, Tools aluminum. Plastic tanks, packaging, trays, plastic trays, covers, trays, plastic tubs, food industry, machinery industry, twin-sheet method, twin sheets, blister, plastic packaging, PET blister, ESD material, ESD trays, ESD blister.

Toolshop | toolmaker | family bussiness. 90+ fellow-workers | 60 tools annually | 30 years on the market Production of injection tools, moulds. Full service included (design, testing and qualification). Plastic components and machined parts production, mould shop with 30 machines. Mechanical solutions and design, product development, prototypes.

AB Umega is one of the largest metal processing companies in Lithuania. Company is focusing on technology, products development to meet the end-user expectations and needs. Employees are highly skilled; products are produced from high quality materials, using the innovative technology; all this leads to high level of quality, reliability and durability Our experience working with Western Europe companies is over 15 years. The majority of orders comes from foreign customers and partners. We are always looking for new ways how to improve our business, how to be more flexible and effective and we are constantly looking for new partnership opportunities with new customers. We are open to the various cooperation proposals and we believe we can start mutually beneficial cooperation for your company. We are skilled in various kind of Sheet Metal processing (CNC cutting, bending, punching, stamping, deep drawing), Mechanical processing (CNC milling, turning, grinding and etc.), Welding (robot MIG/MAG, manual MIG/MAG/TIG, spot, stud) and many other technologies Surface preparation and coating, Casting, Thermal treatment. We are also able to design and produce various tooling equipment. We offer reliable, high quality metal processing subcontracting service. We suggest you to try our service prices and technologies by sending us few trial calculations and together evaluate partnership opportunities. Many mutually valuable relations have started this way.

Our engineering office BOKOS GmbH was founded in 1998. The focus of business activity is on the design and manufacture of special clamping devices. We not only carry out the planning, development and construction of the devices for you, but we also manufacture them exclusively for your company. The assembly work and pre-commissioning take place in our own production hall. Manual clamping systems, assembly workstations and measuring devices are also part of our range of services. Since our company was founded, thousands of clamping devices have been designed and built realized in terms of production technology. You too can benefit from our twenty years of experience.

K&K Prototypenbau GmbH, based in Leopoldshöhe, offers innovative solutions in additive manufacturing. With cutting-edge technologies and high precision, we set standards in the production of prototypes and series components.

HSC CONTOUR GmbH is a service provider to develop. Construction and HSC machining model, devices and tools for aluminum and plastics industry, as well as for high-speed cutting of any materials and technical components.

Sport silencer Eisenmann Exhaust Systems GmbH: That is handcrafted perfection of stainless steel. Solutions that fascinate in processing, function, design and sound. - Driven by sound - our motto combines the Eisenmann Exhaust Systems GmbH, has established a partnership with the national and international motorsport. Indicator of this is the committed sponsoring successful racing teams. Translation by Google Translate

Since June 2007 we have been working independently in machine and fixture construction as well as in contract machining. Our area of competence lies in the processing of customer-specific orders in general mechanical engineering, tool and mold making as well as special machine construction. We manufacture various components made of steel, stainless steel, aluminum, cast iron and plastics on our modern machines. We can also machine the most difficult components with up to 5 axes on our processing machines, with quantities of 1- 5000 pieces. cover.

STL-Technik company offers services in CNC machining, programming, 2D and 3D documentation, technical consulting, technological support and tool selection. High quality of our services is guaranteed by many years of experience in CNC machining, programming of CNC machining machines, fixture construction and metrology. We manufacture parts based on the documentation provided to us. Our goal is to meet all the requirements of the customer, deliver on time and provide services of the highest quality at a reasonable price. With our flexibility we are able to meet various expectations of our customers. We constantly improve quality of our products and services. We are looking forward to cooperation with you!

Power spectrum Toolmaking Our clients benefit from our years of experience. Through innovative tool concepts, the foundations for a low-cost production are laid. Developed and adapted to the process technology of our customers, we manufacture tools and equipment for a process-safe production. • pressing and hot pressing tools • stamping tools • laminating tools • deep drawing tools • Carpet-forming and Hinterschäumwerkzeuge • Forming / composite tools • Foaming • Special tools Mould Based on over 30 years experience we offer our customers an increasingly sophisticated and cost-effective solutions. Hullmann manufactures in Germany and France: • Foaming for molded foams such as seat cushions and backrests • foam molds for molded parts made of hard foam • Mehrnutzenschäumwerkzeuge for moldings Together with the equipment manufacturers, we deliver our molds worldwide. A team of engineers developed a convincing tool concepts for our customers. Thanks to the simulation of manufacturing processes, we are able to provide our customers with engineered solutions. The end of the manufacturing process, each mold is paid off in our laboratory to document next to the tightness of the finished part geometry, underlines the high quality of Hullmann. Model Models as decision support for designers are one of the first steps in our process chain. Only models with a vehicle can be considered realistic. Our machining centers enable us to be able to create complete cars in 1:1 scale. Whether cubing or auxiliary models for tool and mold making, the traditional team of model builders is one of the pillars of Hullmann. In model manufactured by Hullmann: • Working models for mold • Casting models • Teach (Prüflehrenbau) • Waterjetschalten Jigs and fixtures For the completion of individual process steps are often independent of the core process of working, used functional facilities. Whether Hochpräzisionsbohrvorrichtungen for aircraft construction or installation and / or Komplettiereinrichtungen for the automotive industry. The necessary devices are realized by the configuration according to customer specification, through to operational handover of Hullmann. Examples: devices ... • ... for the assembly and joining of different, belonging together components in the grille assembly. • ... for the insertion and braces retainers in the vehicle floor carpets • ... for the production of a component following converting, to produce variants (RL / LL or gasoline / diesel) of a basic component Punch presses and thrusters Specially designed for use in conjunction with Hullmann punching and forming a lighter and less expensive pressure transducer was developed. The hydraulic control of the pressure transducer is designed for safe press control with safety block and monitored valves and follows the latest UV and VBG regulations.The CE marking and the corresponding Declaration of Conformity is self- The machine base is strong even in the basic version. In addition to a light curtain on the operating side of the pressure transducer and sitema clamping heads for safety and comfort during operation, the control system is constructed on the basis of a PLC SIEMENS S7. It can be completed on request with different visualizations in the add-on package.

The company Karl Rieker KG was founded in 1936 as a hardware store. Over the years and decades, our focus shifted to the Manufacture of fabricated metal products, in particular the Beschlägebau for furniture and kitchen furniture. Our products in the furniture fittings based on own developments or to customer requests for drawing. Due to the existing machinery we are also capable of other Industries to operate. Punching from coil, lasers, welding on robots, assembly work of assemblies and final inspection, machining of metals. Constructions of new products on 3D CAD systems and a separate tool construction for stamping progressive dies, jigs and fixtures is available. Surface treatment: electroplating, galvanizing, powder coating, painting with long-term partner companies