After many years of experience in drive technology and gear construction, Net-Components GmbH was founded in 2003 by Dipl.-Ing. Tarkan Peker. It is a DIN EN ISO 9001:2008 certified company.

With our knowledge of the international market and with the goal-oriented way of working, we always strive for market-driven and customer-oriented solutions.

The execution of complex tasks in series production, medium and small series production, as well as prototyping is carried out on modern machining centers, which guarantee a consistently high quality and flexibly realize customer requirements.

We are able to make short-term as well as long-term investments depending on the order situation and thus secure the production with regard to quality, deadlines and prices.

One of the company's principles is to manufacture our products economically using safe and environmentally friendly processes and to meet high quality standards. Our striving for constant improvement and cost-effective production leads to the competitiveness of our customers.

We offer:
- Turned parts
- Milled parts
- Forged parts
- Complete assemblies

Small or large series

We see ourselves as a full-service supplier with a focus on customer-specific operating units and offer the production of electromechanical assemblies and the procurement of all necessary components.
We support our customers in the realization of their products and produce them economically and in the highest quality.

Individual silicone rubber keypads ? A plastic housing for your electronic device ? A spring-contact magnetic connector with cable assembly or a complete handset ? We can do it all.

We see ourselves as a link between production plants in Asia and our customers in Europe. Our strengths lie in the technical advice and support of our customers projects and in a professional procurement, quality assurance and logistics. Our customers benefit from a variety of services such as:

- Technical support from the first idea to series delivery
- Optimization of technical specifications for product safety
- Development of cost reduction options
- Support in development & design tasks
- Technical tests and analyzes in the N & H laboratory

Through highly qualified German and Chinese engineers in our company, we communicate excellently with our customers and supplier, even about complex technical issues. On customer demand, we also can take over entire development and design tasks. A creative and dynamic way of working, as well as tolerance and honesty characterize our cooperation.

All products are manufactured by our long-standing supplier network in Asia. All production plants are certified according to ISO 9001, ISO 14001, TS 16949 and ISO 13845.

Manufacturing according to European quality standards at economical prices is our constant endeavour. With the aim of being an attractive long term business partner, we are constantly expanding our portfolio with new products and technologies.

Our customers include well-known German and international companies in the automotive industry, medical technology, telecommunications, industrial automation, building control technology and other industries.

Where is the highest quality, process reliability, smooth operation and process experience matters, develops and implements custom solutions NMH. Perfectly tailored to the individual customer requirements. With about 100 employees at its 88 367 Hohentengen we are marked by a performance-, medium-sized business culture. With qualified staff and modern technology, we ensure the expectations of our satisfied customers with our solutions.

The 100 menstrong special machine and plant engineering company NMH GmbH + Co KG in 88 367 Hohentengen is in Upper Swabia, district Sigmaringen, about 30 minutes away from the Lake of Constance and adjacent to the districts of Ravensburg, Biberach an der Riss, Balingen and Lake District.

The company was founded in Limburg in 1926. Back then, they mainly dedicated themselves to blacksmithing and agricultural technology. In the 50s, 60s and 70s, the focus of the company's activities was on the locksmith trade. With the takeover by the 3rd generation at the beginning of the 1980s, the steel/metal construction and agricultural machinery departments were created. As a result of the expansion into a new industrial area in 1990, a new factory and administration building was built on approximately 13,000 m² of floor space, in which both departments were active. In 2000, the construction of another factory and administration building separated the two departments. Today, the company is managed by the 3rd or 4th generation.
Today, we are, among other things, an efficient provider of steel and metal construction works. Through demanding projects, we are able to demonstrate our expertise day by day and thus form the basis for a successful future.

In addition to structural steel construction, our production also includes almost every type of locksmith and metal construction work. Thanks to our wide range of services, our experienced assembly team is a competent partner, which ensures smooth and fast processing on the construction site.

Nuova CAM has more than 40 years of experience in the fabrication of high-quality metal products from sheet metal, tube and box sections. We work with leading Italian and European customers within diverse sectors, including but not limited to food processing, packaging, medical, farmaceutical, personal hygiene and sanitation sectors.
At our modern facility located in Bastiglia (North Italy), in addition to standard metal fabrication services including CNC machining we offer also product design, assembly and integration and metal finishing.
Thanks to our engineering expertise, and manufacturing resources we can create extra value to our customers managing your supply chain and/or acting as a single source manufacturing solution for customers requiring complex sourcing, manufacturing and assembly. Our customers can rely on our complete service from concept advice and prototypes to continuous manufacturing and supply.

Development at the highest level
No compromises in quality and performance
From transmissions, axles, vehicle components, systems and kits to entire vehicles in the area of very small and small series, Oberaigner can draw on decades of experience and expertise.

Our expertise lies particularly in the entire vehicle powertrain, including axles and axle suspension, in particular in the area of all-wheel drive technology and special transmissions for special applications.

Oberaigner is a long-standing system supplier to the automotive industry, certified in accordance with IATF 16949. Through continuous development of our management and QA system, we can ensure the provision of services using the latest facilities and methods, both for our own developments and for our customers.

The components, aggregates, systems and vehicles developed by Oberaigner are subjected to extensive testing and testing in accordance with the latest standards in the automotive industry and in accordance with the specifications of our customers. When carrying out various tests and evaluating the results, we work closely with both clients and competent service providers, partners and scientific institutions in order to be able to offer our customers the best and safest product.

OFARTECH is the trademark of Karabudak Metal LLC.

In 2010, We have get into CNC Machining service by producing customer-specific parts in the automotive, hydraulic and agricultural sectors. In 2016, We started to produce hot forging parts for the agricultural, automotive and hydraulic sectors and have also been providing CNC services in the defense industry since 2018. Our main production technologies are milling & turning and hot forging. As an additional technology, we have zamak alloy injection.

We also offer design and analysis services with our expert engineer staff. These services include detailed design (special machines, fixtures, apparatus) and structural analysis & optimization solutions. We have experience in providing special engineering solutions (cost reduction, technical feasibility, test system design) depending on the customer's request.

Our company has produced many qualified products and projects with its experienced and technical staff and constantly improves its product and service quality.

Since our establishment, we have been the guarantee of providing experience, validity and reliability to our customers.

Our basic principle is to deliver our commitments in a qualified, complete and timely manner, and we work with a focus on customer satisfaction by constantly improving all our necessary infrastructure, materials and quality processes for this purpose.

OFARTECH by Karabudak Metal LLC

The company Officina Meccanica Bruegger srl (OMB) is situated in Como, a strategic point between Milan and Switzerland. For two generations OMB is specialized in the production of high-precision mechanical parts. Thanks to the continuous development in the production and engineering OMB has a complete and modern production and offers a complete service:

Our services:
• Design and Engineering of new high-precision mechanical parts.
• Realising of prototypes and samples
• Production of series
• Different surface finishing’s of the parts
• Assembling according to customers specifications
• Testing according to customers specifications

In the Engineering we use following Cad/Cam Systems: ProE, Soldi Works, Rhino, Sum3D und Pacw.

The drawing can be sent in following files: dxf, dwg or iges.

In the production we use metal and plastic materials as for example:

METAL
• iron
• stainless steel
• brass
• cupper
• aluminium
• Hastalloy
• Monel
• Other alloys

PLASTIC
• PVC
• POM
• PP
• TEFLON
• PEEK
• VESPL
• PC
• PA
• Plexiglas
• Reinforced and not reinforced plastic materials
Of course we organise almost all surface finishing’s on request:

HEAT TREATMENT
• Hardening
• Cementation
• Nitriding


SURFACE TREATMENT
• Anodizing natural and coloured
• Hard anodizing
• Galvanizing
• Chromium plated
• Alodine
• Nickel plated, electrolytical and chemical

The company ONIKS Ltd was founded in 1991. and is 100% privately owned. Currently we have employed 70+ highly qualified, motivated and trained workers.

We are recognized as a reliable partner of companies all over the world, whath motivates us for additional investment in our solutions and constant investment into the new technologies and our employees.

We are focused on exporting to the countries of the European Union (Germany, France, Belgium,...), European countries like Switzerland, and also to the domestic market.

With our employees and machinery, we can create products for the most demanding customers.
The production is based on the development and processing of metals and plastics with lathes, milling machines, grinders, CNC lathes, and CNC milling machines, water cutting, and high standards of output quality.

OrcaLMC is a manufacturing company who has expertise in sheet metal cutting, bending and welding.

We can supply parts with haste and precision. We can desing, prototype, manufacture, paint and ship to any location within the world.

We offer manufacturing services such as CNC Machining, rapid tooling and injection molding also.

Othni employs about 100 people and manufactures over 6000 square meters of production space parts made of steel, stainless steel and aluminum sheet.

We see ourselves as an active partner system.
Customer proximity is lived.

From the development, the first prototype of complex assemblies, through to series production, we offer our services.

A certified quality management completes our range of services.

Machining company with 50 cutting machines and an affiliated locksmith shop.

Rotate:
Long and short turners up to 32mm
Turning and milling from bar to 90mm with AGW
Turning and milling of inserts up to 300mm with AGW
Milling:
3-axis, 4-axis and 5-axis milling machines

Sheet metal processing:
2D laser cutting in large format
Laser tube cutting

welding work:
MIG/MAG, VIG/TIG and laser welding

Established in 2012, Pamtek Metal has become one of the leading providers of precision sheet metal manufacturing and engineering for companies in various industry sectors in Turkey and around the world.

We have been providing our customers with innovative and comprehensive manufacturing solutions for nearly 10 years. From initial design to mass production, our customers of all sizes rely on us for product and process expertise in the execution of their OEM business.

As Pamtek Metal, we offer our customers a reliable, single-source manufacturing partnership with unconditional customer satisfaction, operational excellence and dedication to high quality. With our business-partnership approach we offer, we help our customers to be decisive in their own fields and to provide competitive advantages.

Individual solutions for individual customers

With the investment in additional CNC machining centers, a milestone in the expansion of manufacturing capacities has been reached.

Regardless of whether your drawing or our design serves as the basis for processing, we can manufacture flexibly and efficiently. We process all machinable materials such as steel, tool steel, brass, aluminum, plastic and many more. Benefit from our high-quality production in the area of individual parts, small and medium series production. Elaborate special components and prototypes are also part of our strengths. In addition, we assemble workpieces into complete assemblies.

You can also count on our know-how in the area of surface coating and treatment, as we have been working very successfully with competent and reliable partners for many years.

Our wide range guarantees a customer- and product-specific processing solution as well as a high degree of flexibility with short lead times.

PCL Zerspanungstechnik is a family business that has been in existence for 20 years and is active in the contract manufacturing of CNC manufactured components. We turn and mill a wide variety of materials such as steel, aluminum, brass, tool steel, Hardox, etc. Our core competence lies in the production of small series as well as individual parts according to customer requirements. The programming is carried out using a CAD-CAM system, which means that we can also produce complex geometries efficiently. We also work with companies for further treatment, such as galvanizing, hardening or barrel finishing and can also make you an offer in this regard.

Containers and tanks in all materials, shapes and sizes e.g.:
GFK (glass fibre reinforced plastics), PE-HD, PP, PVC, PVDF and as composite material like PVDF/GFK or PP/GFK carried out as round, rectangular, oval or triangle containers / tanks,
also with insulation and / or cooling and heating mechanisms for special assemblies.
Milling and turning parts made of all plastics (precise CNC-machining of PP, PE, PVC, PVDF, PTFE, etc.)

The Peter Schmid GmbH is a family in the 3rd owner-managed generation. Our world is the cutting. Offering a modern and reliable machinery, clear production and lived-quality standards, we can address your individual needs.
In the area of milling, we produce on several machining centers with maximum working range 1270x508x660 mm with up to 4 Axes. In addition, a machining center for 5-axis simultaneous machining max. Diameter 300 mm. For programming we use a powerful CAD / CAM system.
We process the materials forged steel, stainless steel, aluminum, non-ferrous metals and plastics

Turning with multiple curve lathes we produce 25 mm spindle diameter and a CNC Multi-slide lathe spindle 36mm diameter.
Here we use brass (CuZn39) as round, square and hexagonal bars, aluminum, stainless steel and plastics.

In the area round the clock processing, we produce small series on Produktionsfräs and rotary transfer machines and large series on plate Indexing Machine max.Cut 25mm machining diameter with several processing stations such as drilling, overspeeding, thread, milling and grooving. We also process the materials brass round, square and hexagonal

Batches of 1to 1 million pieces represent no problem for us

In conventional processing, we can additionally milling, turning, surface grinding, cylindrical grinding, sawing, honing. We also have special machines to implement and post-