The shoemaker Präzisionsdrehteile GmbH offers since 1949 through precision and quality in the design and manufacture of turned parts and related assemblies. Approximately 1,800 New parts annually prove this.

Schulte-Tengler GmbH is your partner for precision turned and milled parts.
- Precision is not a godsend! -

On an area of 2,500 m², we use the most modern machines to manufacture precision turned and milled parts with a diameter of 3 - 450 mm and lengths of up to 800 mm. According to your specifications, we deliver ready-to-install, including all rework, spaces, as well as surfaces and heat treatments.

Our customers are spread across a wide variety of industries, e. B.

- Automotive
- Mechanical engineering
- Wind turbine construction
- Electrical engineering
- Fastening technology
- Hydraulic component construction

uva.

The family business Schüttler Technik has been active in industrial sheet metal forming and apparatus engineering for more than 40 years. With around 85 employees, we create all conceivable products for our customers - innovative, skilled, and always with the highest quality.
Demands and technology in today's sheet metal forming sector are constantly changing, while quality standards continue to rise. Our entire industry is caught up in a rapid development process. Schüttler Technik is always willing to face these dynamic challenges head on, and make the most of these new technical opportunities. Since Schüttler Technik was founded, we have always relied on state-of-the-art technology. Our great willingness to innovate has paid off. Especially for our customers, who can always access a portfolio of services which always keeps up with the times.

Looking for a reliable and competent business lines for your production? We are a Supplier
of components and mounting hardware for various machinery manufacturers
in the Lake Constance region. Our many years of experience in the production
embroidery machine parts and assemblies for the Saurer Hamel
AG in Arbon we use in the production of high-quality, machined
machined parts and assemblies for various machinery manufacturers
one. We can advise you and look forward to offer you our performance
to prove!

We offer the following services:
- We manufacture sophisticated items according to your specifications
- We do the assembly for complete assemblies and machines.
- We advise you in the technical implementation of the production of your machines / machine parts.
- We advise you in the selection of materials.
- We purchase / store for the required production material.
- For larger groups and machines, we offer a spare parts service.

With great dedication, know-how and innovative technology ready Sczesny pattern and special machinery and tooling Sczesny your product requirements demanding precision parts made of metals as well as highly complex plastic-metal composite parts as unique and in small and medium series production.
Housed at the high-tech location Jena please contact us, ranging from consulting to manufacturing and assembly to logistics and after-sales services, with our services at your disposal.

Our references have benefits for enterprises of mechanical engineering, laser optics, aerospace engineering, metrology and medical technology as well as research and educational institutions.

- Laser cutting of metal sheets and pipes
- Quality welding to DIN 18800-7 "B"
- Assemblies
- Bending and folding
- Punching, stamping and pressing parts
- Water jet cutting
- Laser marking
- Vibratory Finishing
- NEW + + + laser parts and folding up to 4 m in length

Services
For customers, we are problem solvers, and partners. - From a simple laser part to complex assemblies we manufacture everything according to customer requirements. Whether from a hand sketch or a DXF file: Together with our clients we find the solution. On short-term supply needs, we respond flexibly and simultaneously meet all quality requirements of our customers.
The surfaces we deal with experienced partners.

- Laser cutting
Steel: 25 mm thick in size 4000 mm x 2000 mm
VA: 25 mm thick in size 4000 mm x 2000 mm
Aluminium: 15 mm Thickness in the format 4000 mm x 2000 mm

- Laser marking
VA, aluminum and brass up to a size of 400 mm x 600 mm

- Water jet cutting
Virtually all materials in the format of 4000 mm x 2000 mm
Please queries whether the desired sheet thickness is available in stock.

- Bending and folding
Steel: 5 mm thickness and 4000 mm length
VA: 4 mm thickness and 4000 mm length

- Welding
All common welding processes such as MIG, MAG or TIG steel and VA

The company Seelandt & Utecht OHG Plastics Processing was founded on 01.07.1990 by the shareholders Michael Seelandt and Heiko Utecht in Eldena at Ludwig's content. Purpose of the company is the manufacture and sale of plastic products of all kinds and all activities in connection therewith.

The production was initially only an injection molding machine with a clamping force of 50 tons. In subsequent years, the machinery could werden.Im gradually expanded in 1993, the production site of Eldena was moved to Schwerin. At the new location, the product range, and the overall conversion could be increased significantly.
Furthermore, the machinery has been adapted to the new requirements of its size and its performance and features.

The own production program includes tool box and tackle boxes, household items, motorcycle bags, fishing accessories as well as accessories for the garden area. The export share is about18%. A second and more kicking in the foreground area is the production of technical items in the customer order. These include, for example, housing parts for electrical engineering, parts for automotive engineering, plant construction and mechanical engineering as well as parts for various construction trades, or even complete units, such as speakers for the sound of wholesale markets.


Production is done on modern day injection molding machines with clamping forces ranging from 60 to 400 t. Plastic parts to 1,100 parts by weight of g can be injected. We offer our customers more and also complete solutions. Due to the close cooperation with partner companies from the region, the process chain from design and engineering, prototype, tool and mold making is feasible to mass production.




The company currently has 14 employees employed principally in the three-layer system. The assembly and packaging of the products is carried out in close collaboration with a sheltered workshop in Schwerin.

In December 1999, the company moved into a new 2500 square meter production hall and warehouse. Thus, the best conditions for the production of high-quality plastic parts are given to us. Due to an increased storage volume, we can react instantaneously to information on goods of our customers.









A working group of the sheltered workshop has been integrated directly into the assembly and manufacturing process from the middle of 2000.







The main markets of our products are also of Germany and Scandinavia and Western Europe.

To all our customers' requirements to fulfill in terms of quality and adherence to the agreed delivery dates can be, and to ensure the reproducibility of the operational processes, operations and corporate principles and to make testable, we have developed and implemented a quality management system based on DIN EN ISO 9001:2000.

We work with the biggest Italian and international groups in many different sectors and markets and our strengths are the flexibility and dynamism that allowed us to reach in few years a level of exponential growth to which we can add a notable rate of customer satisfaction.
We are convinced that thanks to our own flexible and dynamic way of relating to the market, and to our customers, we can face the difficult and typical challenges of the new global economy.
Our machine fleet is continually updated paying attention to new technologies, which enable us to go further to optimize the range of our production and allow us to deliver the finished product including the necessary certifications.
We hope to start with you as soon as possible an interesting collaboration and to add you to our best customers.
For any other information or doubt we stay at your complete disposal and wait for your request for quotation.

We are a competent and motivated team with an optimal price-quality ratio, which specializes in the area of pipeline manufacturing.

Select Tube GmbH quickly and cheaply manufactures just-in-time required parts according to samples or drawings, from prototypes to small series.
Pipes in the materials steel, stainless steel, aluminum, winding tube or copper.

Quality with which we convince:

- High flexibility, even for short-term requests
- High vertical range of manufacture
- Piping systems completely ready for installation
- Reliable customer service from the offer through production to delivery
- A young team that will be happy to advise you on all aspects of piping systems
- Production according to sample management, if no documentation is available

Founding of the company 2002
First commercial premises in Lovrenc na Dravskem polje
Experiences mean the future
We work with 15 years of experience and are constantly investing in new technologies.

We manufacture high-quality and sophisticated machine parts and offer a complete service.

We are your competent partner in fluid technology with four locations in and outside Germany

- CNC long and short turned parts
- Vertical turning
- Assembly of final-tested mechanical components
- grinding (inside, outside, in the passage etc.)
- honing
- milling
- sandblasting
- hard machining



Complete machining on modern CNC machines (long and short turned parts, vertical turning)

- complex workpieces (from rd3 mm to rd300 mm, vertical turning up to rd150mm) can be produced in batches from 1000 to 100,000 pieces

- All steels, case-hardened and highly tempered nitriding steels, stainless steels, non-ferrous metals as well as extruded, sintered and forged blanks can be machined.



Our precisely machined and accurately controlled individual parts are assembled with the supplied, controlled external parts and then tested.
The end result is tested and perfectly functioning assemblies directly to the customer's assembly line.

World market presence
Bohnacker Systeme GmbH business activities around the world are coordinated from the company's headquarters in Rottenacker, Germany. Our products go out from our headquarters to over 60 countries in every continent.

International sales offices in China, Russia, Belarus, Ukraine, Kazakhstan, Poland, Austria, the Czech Republic, Slovakia, Slovenia and Croatia serve countless DIY superstores and international hardware corporations, making maximum use of the opportunities for profitable business in these important economic growth regions.

The company has concentrated its research and development activities in Germany. Production takes place in Germany, Hungary and China. Every year, the company transforms steel amounting to twice the weight of the Eiffel Tower into brackets, shelves, furniture legs and shelving. The company's global sourcing activities are also concentrated in Germany, Hungary and China.

A large number of patents to protect its intellectual property and its heavy investment in innovation testify to the Bohnacker Systeme GmbH outstanding innovative drive.

As a metal processing company, SIBA stands out due to its many qualities. With our comprehensive knowledge, decades of experience and exceptional flexibility, we are able to solve even complex challenges for you. This is how we create trust and lasting satisfaction.

As a flexible contract manufacturer, we are fast, imaginative and remain down to earth. We produce your top-quality products within the required time. Our wide range of manufacturing processes gives us exceptional flexibility.

We see ourselves as your idea provider, idea implementer and idea developer. We work closely with our customers and find the best solution for every challenge!

Signoretto SRL is a company in the province of Verona specialized in precision mechanical processing. Founded in 1974 as a mechanical turning shop, over time it has developed the set of technologies and skills that now collaborate in the production of components for various technological sectors.

Machining is carried out from solid and from the tube of many ferrous and non-ferrous metals, as well as some plastic materials.

The company provides additional internal services such as mechanical assembly, welding and packaging. While it uses partners for finishing services such as galvanizing, cataphoresis, liquid/powder coating, electroplating, anodizing, tempering, etc.

PROFESSIONAL
FOR SHEET METAL PROCESSING

State-of-the-art machines, many years of experience & service at the highest level.
SITEC is the first choice for CNC contract manufacturing in Germany.
Let us advise you & benefit from our know-how.

SLT Bauer intralogistics
Your vision, our solution: Tailored intralogistics and steel construction for every project
Your expert for tailor-made intralogistics solutions and steel construction projects that meet the highest standards in both the industrial and private sectors. Our company stands for quality, precision and reliability in every step of your project planning and implementation. With our comprehensive range of services, we are able to implement a wide range of individual solutions that make your processes more efficient and ensure greater safety.

Our range of services...
comprises a variety of offers that are tailored to a wide range of requirements. This includes our sturdy and safe railings & gates, which not only offer protection and safety, but also impress with their attractive design. With special load carriers, we offer you tailor-made transport and storage solutions that are developed to meet the specific requirements of your products. However, our commitment goes far beyond that — we also offer high-quality platforms to create additional space and greater efficiency in your work areas, as well as individually planned halls that are ideal for industrial use or for private projects.

Our steel structures are known for their durability, flexibility and exceptional load capacity. Whether you want to build a complex structure, a warehouse or another construction project — we are here to support you with comprehensive know-how. Our high-quality coatings also provide the necessary protection against external influences such as corrosion and weather to extend the life of your structures.

-

We are a company for special machine construction and design, plan and produce systems according to customer requirements. One of the fields of application is the building materials industry.

Due to this corporate orientation, we can offer a wide range of manufacturing technologies.

This makes us a flexible and trustworthy partner for contract work.

We see this type of order processing as our "second mainstay".

SPANPOWER CNC Precision Parts is the manufacturing specialist for high-quality CNC-manufactured components and assemblies. With our modern machinery, we produce prototypes and series.

Our services include CNC turning and milling and wire EDM. Customer-specific surface treatments and module assembly round off our manufacturing options.

Our customers come from the fields of plant engineering, mechanical engineering, optics, automotive and aerospace.