Högg Production Technology: Manufacturing and Outsourcing Partner From engineering to complete series module, all from one source. Whether pure production with assembly or complete new development, including product management. In Högg production technique, you will receive a package tailored to your needs. We offer: Engineering, consulting, prototyping, mass production, installation (including clean room), Product Management Högg production technology: Profile Specialist Special profiles without Mindesmengen Profiles in all materials (titanium, steel, stainless steel, nonferrous metals, ...) Short delivery times Highest precision Further processing of profiles

Process-integrated solutions and products Schweißbau Handling We develop, design and produce in terms of process integration with creative solutions in the areas Schweißbau and products handling. Among process integration we mean a procedure that includes the complete manufacturing and logistics process. Expensive, time-consuming and quality-reducing interfaces, oversizing and subsequent operations are largely avoided. We act workpiece in the gram range as certain as large parts weighing up to 15 t. Series parts in reproducible quality are possible as well as 1 piece solutions. All processing steps, we also offer as a contract manufacturer. Process-integrated welding Development Process-integrated welded assemblies Process-integrated product support Process-integrated manipulators Competence in welding of complex parts or assemblies • Large qualification class E in accordance with DIN 18800 Part 7, expansion to high-strength fine-grained steels, as well as the certification according to DIN EN ISO 3834-2 • Many years of experience in the item-manual welding and mechanized series welding (MIG, MAG, TIG) • High precision complex weldments • we weld leak tested hydraulic cylinders, containers and distribution • Separate welding engineer in the house Large parts - Precision To make the entire production process of a welding assembly or handling device from a cost, quality and schedule aspects optimally, we have modern equipment for machining. Our machining centers are equipped with up to 60-fold tool changer. Herewith we can with a size of up to 8 m x 3 m x to edit parts of 1,5 m and a weight of up to 15t. Also as a contract manufacturer we provide these processing options hesitate to coating To make the entire production process of a welding assembly or handling device from a cost, quality and schedule aspects optimally, we have a painting. This is configured and adapted to paint parts up to 12 m length for 1K and 2K liquid coatings. As a contract manufacturer we provide these editing options at your disposal. In powder coatings and other methods of surface treatment, we work with companies rennomierten surface technology. • Complex machining, painting and assembly of components

In May 1997, our company has been established under the former name and in the structure of a general partnership as WBB Hofemeister & Partner GbR by the shareholders Michael Hofemeister, Uwe Fischer, Jens Rimasch and Michael Stieger. As the site of our company, we have chosen a new production hall in the Bürknersfelder in Berlin-Hohenschonhausen. Here are the first parts are stamped then from standard plates using state of the art CNC machining equipment, has been lasered and bevelled. In the second processing line we saw our task from the beginning and in the production of sheet metal enclosures for electronic components and control panels and signs, primarily stainless steel, engraved and polished for different purposes, for the most part, however, in the elevator, for use which came and come. In January 1998, a series production for the OTIS GmbH & Co. OHG was begun, with various specifications on which our company was instrumental in running to this day successfully and with highest quality.Over the years we have due to our effective business policies expand rapidly and currently have a client base of over 60 regular customers. Today you can find at our site in the Bürknersfelder road next to the management and administration, training rooms and production areas I, II the stockyard and shipping. The enormous growth of our production volume resulted in the late 90's to an expansion of a portion of our production in a commercial environment of Plauen road. Since the end of 2004, we managed to bring all areas of the company on 3,722 m² of rented production and office space in the Bürknersfelder road back together. Thus we are capable of the necessary technology and production processes optimally and therefore cost-coordinated. On top of that we can respond due to the modern machines, equipment and communications technology, such as online connections of all CNC machines with our in-house computer network and cutting-edge programming and resource planning software to customer requests very quickly and in high quality.High-precision measurement technology and a balanced system of internal quality assurance based on our quality certification according to ISO 9001 manufacturing standards guarantee a very high level. By change of name to the WBB sheet metal working GmbH & Co. KG 2007, we intend pursued to give the huge increase in corporate status to the corresponding external frame.

TMP Srl., A family in Emilia-Romagna (Italy), fulfills a variety of tasks, such as milling, turning, threading and drilling in various materials. Individual customer requirements for heat and / or surface treatment can also be met. The support of the German-speaking clients is carried out by the German collaborator, Sabine Mueller. An upcoming personal acquaintance is at the Hannover Fair from 7 to 11 April 2014 possible!

Your partner for precision & Function Since 1530, helping the production specialist Fritz Präzisionsmaschinenbau in Weissach is established and confident since its customers with the highest quality and precision. be reliably managed on 4300 m² with a modern a highly qualified team of machines and individual special tasks. We offer you:  + Samples and test parts  + small series  + pre assemblies  + Extended workbench  + test benches  + Mechanical Devices  + Meters  + special tools  + Sheet Metal Working  + special machines  + weldments We are supplier for customers with the highest quality standards. These include the following industries:  + Automotive & Motorsports  + Air & Space  + Maschinenbau  + Neue Energien We would like to draw up a request for you and look forward to special parts machining very. Especially in the field pattern, test / trial tools and items we are an experienced service partners. We also fit as a specialized manufacturing company in your needs range from the following components: + Socket and block machining + Base frame and frames + Flywheels + External toothing + Pre-assembly modules + Pump housing + Caulking

We have been manufacturing and processing our own aluminum profiles for 25 years. Our company is a 100% subsidiary of BIBUS HOLDING AG. As part of the Group's network, we have access to 61 companies worldwide and have a wide range of products and services in the field of metals, stainless steel and special materials. Our Iserlohn service and logistics center is centrally located in Germany. From there and also our production in CH-Möhlin / near Basel, we deliver to our customers within 48 hours after completion.

Whether laser cutting, folding, welding, powder coating, assembly or much more - you are exactly right with us. Combined with our motivation and flexibility, we offer you a powerful overall package for the production of high-quality sheet metal products and assemblies. We produce in Trimmis - from advice and planning through production to distribution, we handle everything from a single source. We are a full service provider in sheet metal processing. Keller Laser AG in Trimmis, Graubünden, has been in existence since 1995. Thanks to high-precision and modern systems, we have been forward-looking and motivated by technical developments in our industry. "Together with quality to success", this is our motto. And with fairness, competence and environmental awareness.

We are a system supplier to the automotive and metal industry and have 25 years of experience in the production of series, in prototype and tool construction. We manufacture structural components, assemblies and prototypes for motorsport, for special vehicles and vehicles from the premium segment and for the metal industry. We process high-strength and ultra-high-strength steels, aluminum and plastics in order to meet the increasing requirements in automotive engineering. State-of-the-art processes such as 3D laser cutting, 3D printing, and processes from metal forming and CNC machining are used in our production. Feasibility studies, method planning and production - everything from a single source. Under this heading, we manufacture single, progressive and transfer tools for fine and thick sheet metal structural components for the automotive and metal industry.

EWOQE was founded in January 2021, starting with a single machine. By 2024, the company had developed into a team of four highly qualified employees from the region and now operates around 90 machines. We now provide our customers with a wide range of additive manufacturing techniques to meet their diverse needs. - FDM / FFF [* commercially available filaments from Spectrum and extrudr] - SLS [PA12] - SLA [all * commercially available resins from Formlabs] - MJF [PA12] We source our materials and raw materials exclusively from renowned companies to ensure continuous quality. EWOQE collaborates with various companies in the field of industrial manufacturing. Our work in the field of large format printing deserves special mention, as we have been able to support renowned players from the fields of art, culture and politics as well as public institutions from the initial idea to the completion of the project.

We are a traditional family-run company based in Upper Seemen / Hesse on the edge of the beautiful nature park "Hoher Vogelsberg" We supply for you Precision turning and milling parts in small and medium series Special CNC turning, CNC milling Surface grinding and drilling Wage arrangements Our production of turned parts including diameter from 1mm to 450mm and lengths up to 1000mm In addition to the processing of steel, aluminum, non-ferrous metals and plastics, we are specilised to the processing of following stainless steels and special alloys 1.4462 (Duplex) 1.4501 / 1.4404 / 1.4548.4 (Aerospace) / 1.4021 / 1.4057 / 1.4104 1.4301 / 1.4571 / 1.4435 / 1.4923 and difficult to cut nickel alloys and titanium (3.7164) Our Lieferprogamm includes: Bushings / washers / rings / shafts / flanges / bolts / axles / fittings / Steel sockets / thin-walled tubes and more Our services are completed by the conventional heat treatment method such as carburizing, nitriding, plasma nitriding and surface coatings such as chrome plating, galvanizing, burnishing, anodizing, inter alia, Our company goal is to provide you, our customers, drawing parts, suitable, to produce at reasonable prices while maintaining delivery deadlines and deliver.

KOMOS GmbH: Your product idea becomes success. KOMOS is an industrial service provider with the highest standards of product and service quality. For more than three decades, the company has been manufacturing high-quality products made of metal, plastic and composite materials, also in combination with electronics and electrical engineering, on behalf of customers with a competent team and modern machinery. With its hybrid technology network of stamping, turning, forming and injection moulding, in-house research & development, assembly and packaging and many other services, KOMOS can realise almost any product vision at the highest level. Innovative with a system - for more than 30 years: At KOMOS, a 2nd generation family business in Bürgel, 75 employees develop and manufacture high-quality products for the medical technology, automotive, electronics, aerospace, construction and mechanical engineering sectors. The claim is always a long-term trusting partnership with the customers - for successful products, guaranteed 100 % Made in Germany. https://www.komos.de/unternehmen/ Production technology follows function. Punching and forming, plastic injection moulding and CNC turning, processing of plastic, metal and composite materials: KOMOS offers an extraordinary manufacturing breadth and depth under one roof in its unique hybrid technology network - together with its own R&D department, assembly, packaging, logistics and much more. In this way, it is not the technical possibilities but only your requirements for your new product that decide on the manufacturing. Learn more about our manufacturing technologies! https://www.komos.de/fertigungstechnologien/ KOMOS product strategy. Success for you. At KOMOS, we are open to your ideas and visions - and always ready to transform them into market-ready products with full commitment. This is done using a consistently applied methodology: from understanding your product idea as part of a non-binding initial consultation, through technical anamnesis, rough concept with proposed solutions and fine-tuning, to precise production and further processing. https://www.komos.de/produktstrategien/

Production of individual parts and small series inkl.Oberfläche, (anodizing, nickel, harden ....) Very short response and turnaround times. Machines: Deckel-Maho DMC 63 V (X600mm Y500mm Z400mm) Haas VF 5 (X1500mm Y600mm Z600mm) Inkl.4 page editing Mikron Wf 32C (X600mm Y500mm Z350mm)

GTK-Prototype UG was founded in 2014 by Tobias Günther and initially dealt with rapid prototyping machines. Over the years, CNC milling and turning as well as assembly and development work were added due to customer requirements. GTK-Prototype develops and designs on behalf of customers as well as internally using the most modern CAD systems such as Solid Works, Autodesk Inventor, Fusion 360 and others and inserts them into a comprehensive CAM system. Through the production of prototypes in medical technology, mechanical engineering and the automotive sector, GTK-Prototype was able to acquire extensive experience in manufacturing. In 2018, the production option laser cutting was added. GTK-Prototype is currently based in Neuhausen near Tuttlingen and will move to the newly built company location in Radolfzell in the course of 2022.

In 2005 Lothar Wachholz, Edgar Schrade and Harald Späth founded CSP Cut Systems Pfronstetten GmbH to manufacture sheet metal parts for the construction machinery company Terex Schaeff in Langenburg. After the corresponding sheet metal processing machines had already been procured, but the order did not come about as planned, other orders were looked for in the laser and edging contract manufacturing area instead. A large manufacturer of wood pellet systems was won over here after a short time. At the same time, CSP developed an in-house transport system for the automotive industry in the plant construction area, which was brought to market with great success. In the following time, the sheet metal production area was expanded to include assembly production for mechanical engineering. In addition, various projects in the field of special machine construction were implemented from conception to sale. In order to meet the associated new requirements, CSP restructured accordingly internally. New innovations Due to the constant change in product requirements, the services, competencies and capacities of CSP have steadily expanded over time. In 2008, the intensification of the previously sluggish demand for transport systems for the automotive sector opened up new markets. The time was ripe for these products. In addition, thanks to the ongoing development of our in-house transport system - including automatic loading systems and storage options - more and more customers were enthusiastic about these solutions. Since the existing space was no longer sufficient in the meantime, the production area was also enlarged by 1,000 m² in 2008 with the construction of a new production hall. In addition, our contract manufacturing and special machine construction complement the growing intralogistics product area with numerous synergy effects. This results in new, practical solutions that have already won various innovation prizes.In addition, CSP itself was recognized as one of the 100 most innovative medium-sized companies in Germany at the “Top 100” award ceremony at the German SME Summit in 2014. Other markets Today, CSP is firmly established in the field of in-house transport systems on the European as well as on the international market: In the meantime, inquiries and orders have even come from the USA and Russia. Through active marketing and a product that speaks for itself, well-known global players have also been won as customers. However, due to constantly new requirements as well as the simplification of the manufacturing processes at the customers, new developments and systems with an increased degree of automation are required. Against this background, the area of construction and development at CSP has been expanded further in recent years.

After the restructuring of a named plant and machine operation at the Lübeck site was found in April 2005, the chance for a hopeful new beginning by the foundation. Today, the entire team is almost changed into the company launched. Within the first years of the workforce from 11 has risen to 55 now. The combined expertise and years of experience make RONO to a successful partner. In our company's contract manufacturing guarantee skilled professionals - including engineers, technicians, foremen and skilled workers - from planning, through production, to assembly on a production area of 2500 square meters is an optimal order processing. RONO is the ideal partner in the solution of various tasks in the field of metal processing. We offer the following services: • ROTATE • MILLING • DRILLING • SPECIALIST WELDING-PED Certified HP0-AD2000 • ASSEMBLE • ASSEMBLY PRODUCTION • BEHÄLTERBAU • ROHRLEITUNGSBAU • REPAIR SERVICE Through constant innovation and calculated investment in our machinery RONO was for many companies in the economic region of North became the epitome of modern production technology. Our service focuses on the contract manufacturing using advanced machines, focus on and austenitic and duplex steels, as well as non-ferrous metals and plastics are not alien to us. Surface treatments provide for us is not a problem Our competent performance serves the areas of general engineering, steel construction (frame, racks and welded assemblies

We are a Automatic CNC Turnery (founded in 1983 ) that produce precision metal parts, components and assemblies We ensure: - reduced times for the realization of batches - constant quality on each piece - KAN-BAN deliveries, - For delivery, we make use of qualified carriers that offer a quick and safe service on the whole national territory and abroad. We are competitive with batches starting from 100 pieces, on diameters from 2 to 70 millimeters from the bar. Materials utilized: We make use of the best steel mills on the market, to always ensure a perfect performance of our products and we are able to trace each batch. In addition to common and automatic steels, light alloys (aluminium), brass, bronze, plastic, we have gained a large experience on the processing of: - Austenitic stainless steels series “300” - Ferritic and martensitic stainless steels series “400” - Alloys and super alloys, Inconel, titanium, duplex e super duplex - Alloy steels, quenched and tempered steels We manufacture particulars and components for the following sectors, according to the customer’s specific design: • Medical/Biomedical • Hydraulic, fluids flowing • Pneumatic • Packaging, Food Industry, Pharmaceutical • Automotive, Motorcycle and Cycling • Industrial Automation • Railway / Cableway • Electronic • Sustainable Energy • Gardening/Hobby • Earthworks and Agricultural in general • Window and door fixtures Where required, we can carry out the assembly of the Articles, in the specific area within our Production Departments and, for the Medical sector, we have a dedicated assembly hall

We are a manufacturer of high-precision, technologically sophisticated progressive dies for series production. We also create the right spare parts for this in contract manufacturing.

Our company specializes in designing and manufacturing special machines. industrial automation and specialized in the production of highly complex milled and turned parts. The highest priority of our company is the continuous development and expansion of our product and service portfolio in order to always offer our customers the highest quality.