Founded in 1963 as Snc, Min-Tor is a renowned company in the sector of mechanical small parts and precision shafts for electric motors for use in various sectors. Thanks to the quality of its products and the always punctual deliveries, it has grown over time until it became an Srl in 1980. The highly qualified staff and the desire to improve have allowed Min-Tor to receive UNI EN ISO 9001 certification: 2000, a guarantee for all its vast clientele.
The company is spread over a covered area of 5000 square meters in a new structure built in 2003 and can count on a fleet of machines for the production of small, medium and large series, CNC sliding headstock lathes and cam lathes, as well as a complete range of machines suitable for finishing such as plunge and infeed grinding and machines suitable for reworking operations such as rolling, hobbing, transfer and induction hardening Our production is based on the specific design of the customers, also offering a consultancy service and feasibility of the details.

AUTOMATIC PRECISION TORNERIA

Parts Zanon was born in 1989 as a company specializing in mechanical processing with transfer machines and CNC machining centers.
The entry of the two children in the staff by a strong organizational and technological impulse and leads to the modernization of the production system with the latest CNC lathes.
The new headquarters, built on an operating area of over 2,000 square meters, consolidates the development and opens new perspectives that improve and strengthen the market position.
Thanks to its well-organized structure and its constantly updated specialized personnel able to ensure timely deliveries combined with a high level of quality so as to enable it to meet such areas as automotive and hydraulics.
For years now, it is the reference point for the turning and milling precision both on the Italian market and the European one.

Since 1995 MINUTER has been manufacturing small machined parts on customer’s drawing and specifications, with CNC Swiss-type automatic lathes in conformity with certified quality system ISO 9001.
Thanks to the twenty years of experience in the automatic lathes field, the company has specialized in the production of medium/small diameter (from 2 to 35 mm) brass, free-cutting steels, aluminium and stainless steel complex parts.
The products are meant for a wide range of sectors such as: valves, taps and fittings, gas regulators, pneumatic, electronic (connectors parts), thermal hydraulics, equipment for GPL… and wherever parts with tight tolerances, complex and precise machining are required.
The production is supported by an internal laboratory with cutting-edge measuring instruments such as: two optical profilometer Ommelwerke, an optical machine OGP, a 3D Zeiss, a roughness tester and other control instruments.
MINUTER is at your full disposal for free quotations, samples and product developing phase advice.

We the company MIPP Mikro-PräzisionsPlastic-Teile GmbH have been a guarantee of quality and innovation in the production of precision plastic parts and assemblies since 1951. We specialize in processing technical, thermoplastics into high-precision parts.

As a competent system partner with a high level of innovative strength, we take care of your wishes. From the design of individual plastic parts to the fully assembled assembly.

We offer expert advice and support throughout the entire product cycle, from design to service, from production to “just-in-time” logistics.

With our company headquarters in Karlsruhe and our subsidiary in the Slovak Republic, we are a strong and reliable guarantee of precision and quality paired with decades of tradition and experience.

We have always, whether in the past and on to the future, believed that any significant changes can happen, only if something is actually done to made it happen

Therefore and based on this belief, the future of MIRALAGO has always been targeted, by placing ourselves in a respectable position by offering products and services that enhance and add to the image that we all want to achieve.

In following the current trends, we are prepared to offer to all our Business Partners new working tools, like catalogues and this Web Page.

We hope that they can create stronger connecting chains to ALL.

Ours is a mechanical workshop on the market for over thirty years, specialized in the production of small precision metal parts.
Thanks to our equipment, CNC sliding headstock machines (from diameter 1 to diam. 40), thread rolling and centerless grinding for the execution of external grinding, both in the past and in plunge, we believe to be competitive and reliable as regards price and quality.
In addition, we want to inform you that we are able to provide you with heat treatments and galvanizing thanks to the support of companies specialized in the sector.
We deal with avp, inox303, aluminum, pvc and brass steels for the production of design parts for the electromechanical, household appliance, mechanical, pneumatic, electromedical, furniture, modeling and lighting sectors.
We will take care of answering your welcome requests for offers that you wish to send us or, if necessary, to arrange a meeting to start an employment relationship.
Thanking you in advance, we would like to take this opportunity to extend our best regards.

MIREP by Grasso Francesco

Romanian manufacturer of special machine tools offers high-quality services in the fields of machined metal constructions and mechanical processing by cutting.

THE UNIQUENESS and COMPLEXITY of the products DESIGNED within the Design Department of MIRFO, are the main strengths of the company. These are complemented by the creativity and faultless professionalism of the engineers from the MIRFO team.

CREATIVITY & INNOVATION in DESIGN

Today, with our own team of DESIGNERS we are able to process complex documentation and execute works of HIGH QUALITY, ADVANTAGEOUS PRICES, and DEADLINES.

MIRFO products serve a large number of industries and fields of activity:

AERONAUTICAL, AUTOMOTIVE, RAILWAY, NAVAL
METALLURGICAL
PLASTICS
CONSTRUCTION
The seriousness and professionalism of the MIRFO team have been rewarded over the years with the trust given to MIRFO by large European companies in various industrial fields.

We pride ourselves on our long term partnerships and excellent cooperation that we have always ended successfully with renowned companies such as:

AVURE/QUINTUS – Sweden
IMECOLUX -Luxembourg
DSD- Luxembourg
ITALCONTROL, GABLIATI, TECTUBI RACCORDI, DANIELLI SPA – Italy
NEFF, DOERST – Germany
GROUP CIDEL – France
Uzinele Dacia, TRW AUTOMOTIVE, VAE APCAROM – Romania.

Welcome to Erdel Engineering
Your partner for concept development, design and manufacture of mechanical components and assemblies.

Miroglio & C. Company works in the precision mechanical field with CNC lathes and machining centres producing components, having a production range diameter from 4 mm up to 250 mm. Our company is specialized in working with high resistance special steel grades to supply a finished product (including grinding, heat treatment and surface treatment) to the end-user. Our design and production capabilities cover prototyping, small and medium series, and up to high volume quantities. We can also supply forged parts, both hot and cold, and extruded components through our partners to provide you with a full complete solution to your mechanical components requirements. Miroglio & C has been supplying directly to major industrial vehicles and automotive passenger vehicles. Our experienced Technical Staff, equipped with the CADCAM system, are able to provide feasibility studies and work with your Designers to co-design products at the most competitive costs. Miroglio & C is certified in according to the automotive norm IATF 16949 (ISO 9001), environmental and safety norms, ISO 14000 and OHSAS 18000 and works with modern machineries to ensure the supply of high quality parts to its clients.

About Us:
Since 2003 we manufacture in our factory in Bangalore, India, precision turned and milled parts for numerous German and Indian companies. We achieve attractive unit cost reductions both in mass production and in small series and individual parts. We offer the cost advantages of the Indian site in German quality and reliability of supply - both your contact and the distribution center are located in Germany.

Range of services:
The range of our production ranges from welding, milling and turning to heat treatment, assembly and surface treatment. For production, we have a comprehensive machine available, including a wide variety of CNC precision turning and machining centers, which were imported from Germany.
For high-quality follow-up of parts such as hardening or anodizing and production as well as other steps that can not be realized in our home, we have a network of Indian suppliers available with which we have been working successfully for many years.

Logistics / customs clearance:
If you use our work in India for purchasing parts, you have nothing to do with the logistics - to the delivery of your order we will take care. We assume both the customs clearance as well as the logistics of your order, the transport is either via air or sea.

Mitech Werkzeugbau und Fertigungstechnik GmbH was founded in 2003.
Since we have retained the old proven team, which has been additionally strengthened by new, innovative personnel and new machines, we can guarantee the precision and reliable quality of our products. Due to the reorganization and modernization of our production workshop, the manufacturing spectrum has also increased.

MITEC S.R.L was born in 2009 from the evolution and decades of experience in the mechanical sector of the owner who after 30 years at the service of the family company chooses the technological renewal investing all of himself on his new adventure.

In a few years new numerically controlled lathes, vertical machining centers and injection molding machines for the molding of plastic materials are purchased; MITEC SRL is at the service of the largest companies in the surrounding area, gaining more and more trust and consensus thanks to its versatility that allows you to realize pre-assembled components and kits for different sectors: industrial doors, gates, sliding systems, packaging, automatic machines, industrial kitchens and medical.

MITEC S.R.L extends over a total area of 2,800 square meters of which 1,250 square meters of production area (2/3 production and 1/3 warehouse and offices) and the remaining loading / unloading area and courtyard.

Currently there are 12 employees plus 1 worker and 1 administrative assistant for a total of 14 employees.

Family, medium-textured, operation.
Most of the staff, the greatest asset of the company, are formed in the house and already some decades there
The strength is in short delivery times, (including possible through tremendous flexibility in working hours), with the highest possible quality and related Value for money ..

We are a dynamic company specialized in the production of technical articles in die-cast aluminum and zama, with medium-small productions and with a very high level of quality

We are a dynamic company specialising in the production of die-cast aluminium and zinc-aluminium alloy technical articles, with medium-small piece sizes and a veryhigh qualitylevel.

We have been working in the furniture and lighting fittings sector for more than a decade.

Our aim is to give you a TOP-QUALITY COMPLETE SERVICE at a competitive price, with total guarantees from design to the finished product, throughout all processing stages.
We assure you:

TECHNICAL EXPERTISE
QUALITY
QUICK TIMES
COMPETITIVE PRICES

In particular, we are "masters" in the die-casting of aluminium and zinc-aluminium, and in the casting of aluminium, years of experience in the sector have given us specialist expertise recognised by many designer names, in the furniture and lighting fitting sectors above all.
CONSULTING:
MOULDS:
Design and production of moulds for die-casting aluminium casting aluminium
PROTOTYPES:

DIE-CASTING:
MACHINING:
Drilling, thread-cutting, milling-cutting, etc.
TUMBLING, GRINDING, CLEANING, SATIN-FINISHING:
GALVANIC FINISHES:
PAINTING:
ASSEMBLY:

QUALITY CONTROL:

Our company was founded in 1985 as a mobile portal machine tool manufacturer. To overcome the crisis of the 90s, collaboration began with the company ORTHOFIX S.r.l., a world leader in external orthopedic products, in particular, the engineering of prototypes and pre-series was studied. As the stagnation in machine tools persisted, in 1997, we switched to the production of orthopedic modular systems on behalf of ORTHOFIX S.r.l., including the construction of bone cortical screws. We subsequently added other customers, always consistent in their qualitative needs, such as OMV MACHINERY S.r.l., a leader in the production of machinery for the production of food containers, the P. BERETTA WEAPON FACTORY in Gardone Valtrompia, BALZARIN S.r.l. which deals with the design, construction and processing of sheet metal molds.
We specialize in the processing of steels according to UNI EN 10088-1 AISI/ASTM, aluminum alloys, plastic materials (PSU-Polysulfone, Pom C, Nylon, etc.) and thermoforming materials.
We have chosen to have few qualified customers so that we can guarantee, not only quality, but also delivery. This is why we manage our warehouse of parts agreed with the customer. In 2023, the company had more than one million euros in turnover and can count on 10 qualified employees.
Thanks to the support of our qualified suppliers, we are able to provide surface treatments such as hard anodic oxidation after tumbling, vacuum hardening, sandblasting, stainless steel polishing, electropolishing and laser marking. Our production is continuously monitored according to quality specifications, designed to exceed the strictest standards, and everything is archived for traceability of both production and raw material.