We are a leading manufacturer of aluminum die casting parts and produce for major system manufacturers in the automotive industry, general engineering industries, as well as heating and electrical installation die-casting parts. Schött-Druckguss GmbH sees itself not only as a pure supplier of highly complex die-cast aluminum parts, but also as a reliable partner in the areas of cnc-machining, surface coating, assembly and development. As a powerful and innovative medium-sized operation, we immediately respond to rising demands and market changes. products: housing, cover, pumps, water pumps, oil pumps, bodies, bearing cap, piston, brake unit, control housing, cylinder, konsole part, side part, power electronics (explosion proof), housing front, rear housing, heat generation, housing burner, housing cover, ventilator housing, heat sink, filter bowl, filter head, adapter, driving element, garage drive etc. industries: automotive, heating technology, electronic, mechanical engineering, lighting technology, filter technology, ventilation technology, drive engineering etc.

About us With our industry expertise, we can help you successfully and promptly implement your production project for mechanical components, assemblies, and housings for small to medium-sized series. For more than 20 years, we have been experts in die casting, injection molding, and other mechanical processes. Our focus is on cross-process thinking. In Germany, Europe and Asia (in-house certified production) we manufacture your mechanical components, assemblies or housings. Our manufacturing services include: Engineering: Technology consulting (wide range of materials and manufacturing processes); CAD evaluation, construction & development Prototyping (close to series production; 1,-3,000 pieces) for die casting, injection molding, precision casting, sand casting, PA casting, vacuum casting, CNC milling, SLS & SLY Series production for batch sizes of up to 25,000 units Metal: aluminum die casting, zinc die casting, deep drawing, gravity die casting, sand casting Plastics: injection molding, thermoforming, extrusion Our Services: Project-related surface finish Coordination of the entire production project Advice along the value chain Assembly service, measurement reports International logistics service

THE COMPANY Quality and efficiency since 1979 COSVECO S.r.l. was founded in 1979 and originally specialized in the production of brass and zinc die-cast parts for the consumer area. Over time, our company has focused on zinc die-casting parts developing expertise and technologies that today are used in all technical fields (furniture accessories, automotive components, electronic opening and locking systems parts, electric appliances parts, lighting components, cosmetics, hydraulic and pneumatic valves, etc…) and their application. COSVECO S.r.l. has highly qualified technologies and efficient systems for the production of components made of zinc alloys, as well as for treatment of various surfaces by semi- and full automatically production process. The company has grown a lot in recent years thanks to the targeted investments that involved both new production equipment and the quality sector with the installation of a metrological laboratory with qualified personnel and calibrated and certified equipment (eg 3D measuring machine). Furthermore, thanks to our information system we are able constantly monitor all production processes by traceability of the lot.

We founded MPjetting in spring 2021 with the idea of offering and manufacturing 3D sand molds for the open market. We are particularly proud to be the first company in Austria to have our own 3D sand printer. We have found a suitable production site in the halls of a former leather factory. We started production here on November 1st, 2021. The advantages of 3D printing include the fast throughput time from data entry to the delivery of the components, the unlimited variety of geometries and the cost savings due to the classic model facilities that are not required. If you already have a need for printed sand molds and/or cores, we would be happy to hear from you. We would also be happy to send you samples so that you can get an idea of our quality. You can not only obtain sand molds and/or sand cores from us. With our partners for design, casting and machining, we can deliver prototypes, individual parts and series parts made of aluminum within a very short time. In addition, components made of other materials such as gunmetal, cast iron, etc. are also possible. If you have a need for components made of printed sand molds and/or cores, we would be happy to hear from you. Your MPjetting team

SOMEIL is specialized in zamak 5 (z410 / zinc alloy) high-pressure diecasting and electroplating treatment (nickel or chrome finishing) in-house. We have human and material resources to assist you from the Mold design/manufactoring to delivery of the final product. We are certified by ISO 9001 since year 2000. Currently, our Quality Management System is certified to ISO 9001:2015. Contact us for more information.

BME is the global specialist for high-quality components and engineering solutions. With our solutions for special parts according to drawings, we have positioned ourselves as a quality supplier in high-growth markets. In addition to the production of standard parts, we are specialists in the production of parts and assemblies according to customer drawings. Our core business is divided into the following areas: ■ Dowel pins, axes and shafts according to drawings ■ Cylinders according to DIN and ISO We ensure quality and environmental requirements with our integrated management systems. Due to increasing customer requirements, we are also constantly developing our quality standards. Our production processes: ■ Turning - drilling - knurling ■ Cut thread, drill thread ■ With surfaces (ground or milled) ■ Centerless cylindrical grinding ■ Surface grinding and plunge grinding

At Fimtech we cast aluminium components with full respect for our customers' needs and quality standards. Three various-sized casting machines allow us to produce castings that differ in shape and weight (from 0,1 – 5 kg). The materials used are EN certified primary or secondary aluminium alloys, currently available on the market. Also, we at Fimtech provide sub-assembling services, with the integration of electric and mechanical components, manufacture electrical panels and other control boards. Our products are suitable for a wide range of applications: industry, electronics, power electronics, lighting engineering. Fimtech works as a subcontractor or cooperant in the assembly of various electrical/mechanical components and devices. During many years of work in the field, we gathered valuable knowledge which enables us to produce even the most demanding and high-quality products. Fimtech assembles different products according to the requirements and design of our business partners and therefore help them reduce the manufacturing costs.

GMR Endüstri Teknik is a foreign trade company, which is supplying custom made drawing parts and industrial products from Turkish Industry according to variable customer demands. GMR located in Bursa, Turkey where is the heart of Turkish manufacturing industry. We are focused especially on custom made parts for European automotive manufacturers and their suppliers. We are supplying precision turned&milled parts, cold&hot forged parts, special connecting elements, sheet-metal parts, laser&stamped parts, welded components, aluminium injected parts and cast-iron parts for automotive and various industries. The range of products that can be supplied by GMR with ease of access to powerful factories located in the surrounding provinces are quite large. Apart from semi-finished and finished products, various raw materials like aluminium sheets and profiles, cold&hot rolled pipes, acrylic sheets, aluminium foils, special packaging goods and all kind of industrial demands can also be supplied by GMR with required certificates and test reports.

COMPANY PROFILE Fisep (www.fisep.com) was founded in 1967 and is a reference point in the production of technical aluminum high-pressure casting (HPDC) and hot-forged brass components, in Italy and abroad, which are mainly used in the automotive industry, industrial pumps, electric motors, earthmoving equipment, gas and hydraulic valves. In 2018, the company was purchased by New Olef (www.newolef.com), a historic foundry in Brescia, which specializes in the production of technical aluminum alloy components through low pressure casting (LPDC) and gravity casting. The acquisition by New Olef, part of Capigroup, enabled Fisep to add continuity to its growth and implement an important investment plan in terms of human resources and new technologies to meet the challenges of a constantly evolving market. Fisep provides comprehensive customer support, starting with feasibility studies, MAGMA simulations, co-design, planning and project management activities. In addition, Fisep can offer its customers turnkey solutions, which, in addition to hot forging, also include the production of molds with highly qualified partners, precision machining and assembly activities. The HPDC plant has 16 automated work islands with clamping forces ranging from 170 t to 1450 t, which can produce castings up to 25 kg. Equipped with lubricants, operated by anthropomorphic robots to handle and separate the castings. The foundry consists of 4 melting furnaces, which make it possible to process various aluminum alloys at the same time. The finishing department has 3 different types of sandblasting machines. The brass hot forging plant has 6 working islands with clamping forces of 150 t to 320 t, which can form components up to 2 kg. Equipped with graphitization machines and autonomously controlled billet heating furnaces. The CNC machining department consists of 4 CNC transfers and a 4-axis machining center with a rotary table. Fisep is certified according to UNI EN ISO 9001:2015 and IATF 16949.

SOBOWIDZ steel , iron & non-ferrous foundry - since 1983 - POLAND sand castings (resin boned sand castings , green sand castings) gravity die castings, centrifugal castings pressure die castings lost wax precision castings; cast steels stainless steels, heat resistant steels, wear resistant steels, unalloyed carbon steels irons,- grey iron - ductile iron - chromium irons - alloyed irons - ni-resist - nihard superalloys: cobalt castings - nickel based castings - titan alloy castings aluminium lead, zinc , ZnAl, tin brass - bronze - copper steel and aluminium prefabricated constructions 1.4823, 1.4777, 1.4848

Benefit from our experience Since 1964 we manufacture high quality aluminum castings in Kokillengießerfahren in Germany. Our international client base includes large areas of mechanical engineering, electrical and lighting industry as well as the facade. In order to meet the increased cost awareness of our customers, we offer since 1992 - through the cooperation with two companies - the manufacture of mold and die casting parts at cost location in Poland. Range of services: -Expert advice in the preparation of casting designs, taking into account individual customer requirements as well as high efficiency -Complete handling of tool manufacture and sampling with Initial Sample Inspection Report Small, medium and large-scale production of castings with unit weights of 0.02 kg to 20 kg hydraulic molding machines -Comprehensive Rohteilbehandlung with qualified partners: Mechanical machining, heat treatment, surface treatment (paint, KTL-coating, anodizing, etc.), vacuum impregnation -Montage/Konfektionierung Our production is subject to ongoing quality assurance according to DIN ISO 9001:2000. For more information please (die casting, alloys, etc.) please see our internet presence: www.aluguss-uhlig.de

Core Business: • Development, production and processing of highly loaded lightweight parts in iron sand casting for a variety of different applications in different industries. Locations: • 2 production sites in Germany - Singen and Mettmann Market position: • Europe's leading supplier of spheroidal cast iron - components for cars, trucks and non-automotive Special knowledge: • Proven know-how for the development and series production of components in ductile iron casting (spheroidal cast iron), e.g. for safety components in car chassis and for truck wheel hubs and frame attachments. In-house developments: • high-strength cast iron material SiboDur • Analysis methods for obtaining optimal material properties for components • Composite casting with iron and light metal materials • Welding of cast iron Development and validation knowledge: • Product development with the support of the latest computer-aided simulation (CAD & FEM) • Prototype production under series conditions • Casting-specific material and process development

SR Tech specializes in the production and import of customized technical items. Founded in 2011, the company soon established itself on the market as a reference partner for all companies that need help in choosing the best production technology for cost-effective mechanical components The company focuses on supplying mechanical components with a highly technological, aesthetic and functional content, ensuring the continuity of supply through the management of the stocks at KanBan’s headquarters in Parma. Customer satisfaction is guaranteed by the respect of delivery times, by the quality of supplies and by the competitiveness of purchase costs that we are able to obtain thanks to the experience gained in outsourcing through over 15 years of activity with Asian suppliers.

mbm, is a trading company with already 12 years of experience in procurement of industrial components from Asian markets. mbm, they would like in your procurement activities with its possibilities support for new projects, order processing, logistics and warehousing. We produce according to your specific drawings and specifications, your desired designs in terms of "surface treatment" and their expectations in terms reliable delivery times: - Aluminum and zinc die castings - Grey, fine and stainless steel casting parts - Plastic Injection Moulding - Sheet metal bending and stamping parts - Forgings - Cold forged parts and fasteners - Turned parts - Bearings On request we are happy to take care of the entire procurement logistics to for the storage of safety stocks. We would like as a customer and you as, competent and reliable Convince partners of our service. Take yet to realize the possibilities existing savings. We are happy to provide you with in detail in a personal meeting our Options and years of experience in the area prior to purchasing.

Dear Sirs; Our company is in the market since 24 years. We target our selves to create more competitive solutions for our customers. We will be very pleasure to present you our experience with LCC (Low Cost Country) advantages in Turkey for your product range that you could prefer to subcontract for your future benefits. We will look forward to receive your quotations to start our mutual partnership.Please do not hesitate to contact us For any affair. Best Regards Eyup Yildiz

The CSABAcast Leichtmetallgiesserei GmbH, an aluminum die casting foundry about 70 km east of Budapest, located near the M3 motorway. The company, which has more than 45 years of experience in the field of the light metal casting, sees its priorities in aluminum die casting (19 die-casting machines with a clamping force of 400 tons to 1600 tons) in the processing (15 CNC machining centers) in the assembly of pre-finished parts. Total sales in the past year was about 20 million euros and was increased from approx. 250 employees deliver. The product range includes parts for the automotive, white goods and heating industry. In large series pre-finished cylinder head covers, transmission parts, gear housing cover, engine mounts, subframe, water and oil pump housing, burner housing and washing machine drive parts for customers such as Audi, BMW, Bosch Thermo Technology, Ford, General Motors, GPM, Miele, VW and others are manufactured. The CSABAcast Leichtmetallgiesserei has quality certificates for more than 15 years.In August 2004 CSABAcast obtained the process-oriented quality certificate ISO / TS 16949:2002 and the environmental certificate ISO 14001. An extension of the die casting die casting machines to higher clamping forces, as well as investments in the mechanical manufacturing, and rationalizations are planned in order to manufacture the new orders for the customers in the future. At the same time, the continued implementation of a customer-oriented production management system is driven with the involvement of all employees to be the goal of CSABAcast Leichtmetallgiesserei GmbH, a competent, reliable and cost-effective partner for its customers to continue to put into action.

PTG GmbH was founded on November 10th, 2006 by the company Gröber Metallverarbeitung. The core competence in surface finishing through superfinishing was supplemented by the strategic procurement management of drawing parts and assemblies as well as the trade in sliding elements.

With more than 70 years of experience in design and production provides Metalconstruct Zrt. produces aluminum products for industrial and private use. Our foundry in Sirok (Hungary) produces simple to highly complex products on 5 automatic, parameter-controlled IDRA die casting cells. With our flexible CNC machining centers, we can process any desired quantity and thus provide you with a finished product (including assembly, if required).

Specialists for zinc and aluminium high pressure die casting with 27 years of tradition