WE WILL BE PRESENTING AT FORNITORI OFFRESI, THE MECHANICAL FAIR IN ERBA FROM 17/02 TO 19/02. YOU WILL FIND US AT PAVILION A - STAND 167

Ghioni Ingranaggi is a company based in Milan and founded in 1959. The company is specialised in the manufacture and/or processing on behalf of third parties of CYLINDRICAL GEARS with straight teeth (also INTERNAL and ALBERATED), HELICOIDAL, CONICAL, SCREWBOARDS, SCALED SHAFTS, V.S.F. COUPLES, crown wheels for SILENT CHAINS, WHEELS for ROLLER CHAINS, pulleys for toothed belts, long THREADS.

To complete the range of services offered we carry out: TURNING, BROACHING, SHAPING.

Thanks to consolidated experience and a specialised technical office, the company is able to produce parts to sample and solve problems that arise quickly.

GINO OLIVARES is a company specialized in the production of sintered components.
The company does not only undertake the design and production of sinter components, but also produce all the tooling and dies necessary for their manufacture.
GINO OLIVARES exports to 22 countries and provides its users with complete assistance in order to resolve all technical and design requirements, therefore ensuring the most efficent use of sinter.
The company currently have over 35 presses of 4 T. and 350 T. capacity, 3 sintering ovensas well as 2 burnishing and vaporization ovens.
We also have a quality control lavoratory equipped with modern instruments for cheking both dimensions and mechanical properties of the products.

Indoors
Outdoor spaces
Sharpening broaches
CNC turning
CNC milling
Poking (Profile)

Surface grinding
Distribution of broaches




We realize complex processes

through our extensive range of machinery.

Turning and milling parts with gearings / profiles


be fully prepared.

Your wishes and demands

our focus.

COMPANY
G.S.I. Ingranaggi was founded in 1970 in Reggio Emilia, operating in the market as a company specialised in the construction of high-precision gears.
The experience gained, the continuous technological innovation and the training of highly qualified staff allow G.S.I. Ingranaggi to satisfy the requirements of all its customers.
Covering diversified sectors, the company has developed highly flexible production systems suited to diversified production, from small and medium batches to mass production.

The company, based in betting rings can look back on a long history: founded in 1945 by Heinrich Annas, the factory produced in the past, especially pre-finished machine and spare parts for the textile machinery industry.

In 2007, Ludger drop man the shops and the company now manages in the future: As a reliable supplier for industrial companies is Anna's engineering today items as well as machinery and equipment for various industries forth. Due to the increasing demand for vendor parts for wind power and biogas plants in the area of renewable energy has become increasingly important.

The family business founded in 1946, produces with today 75 employees to approximately 6,000 square meters high-quality drive components. Precision and quality - achieved on modern CNC machines, tested and documented - is part of daily business.



Flexibility and commitment of our medium-sized company are known far and beyond the borders of Germany.

Dear Ladies & Gentlemen,

as a family from the metal-working industry, we want to introduce you to our wide range.
The versatility of possible solutions is one of our strengths and allows flexible solutions to complex challenges.
So we have only the necessary know-how through various practices, such as CNC turning, CNC milling, wire EDM, etc. We combine the latest technology with years of experience and guarantee you reliability and quality.

The company Heinz Knöpfle GmbH was founded in 1979 by Mr. Heinz Knöpfle as a company for special machines. The company is located in Schwabmunchen / Schwabegg, about 30km south-west of Augsburg.

We supply our products mainly to a solid customer base with great success, we would like to introduce our company.

Proof of quality:

Through the coordinate measuring machine Crysta Apex S544 Mitutoyo, we can now also supply with measuring protocol the manufactured parts.


CNC Turning:

With our CNC lathes we can to edit 65mm rotary parts of the rod automatically and completely. The machines are equipped with a 12 - equipped trade revolver and with driven tools. A counter-spindle and Y-axis enables short cycle times and make some cases further machining on a milling machine unnecessary.

We manufacture precise and sophisticated turned parts as individual parts, small or large production runs with short delivery times and consistently high quality.


CNC Milling:

Years of experience, modern production techniques and machining centers, highly qualified and motivated employees are the basis of our performance. This allows us to present the desired results our customers quickly and inexpensively. Working in oscillation mode allows us to equalize loading times and increase output.



Saws:

The basis for a safe and good machining is not only a good material quality, but also a good blank. With our cutting precise cuts are realized with short cutting times. We saw our own production as well as in wages for other companies.

We offer to Sägezuschnitte from € 0.03 per cut.
The range of materials ranging from mild steel on non-ferrous metals to stainless steel.
Our state of the stocks enable us short delivery times for their Sägezuschnitte.


Welding:

In order to offer production from one source, we have a welding robot available.Through this, a constant quality is ensured.


Device & toolmaking:

With our well-stocked machinery and many years of experience in tooling, we are able to create bending, punching and stamping tools. Our fixtures and special machines find their use in various industries.

Depending on customer requirements, we offer ready-made parts or just the tool. The further refinement of the products we take over for you.

The parts production in the field punching, bending and stamping can be held up 150to in-house.



Try us, we look forward to your orders!


Sincerely,

Heinz Knöpfle Susanne Knöpfle Andreas Knöpfle Christian Knöpfle
Management Management Management Manage...

We are spezialiced to built complex parts, and assembly it. We are working for automotive and machinebuilders. We make turning and millingparts. We make hobbing part too.
We can make own machine and fuxture, include the control unit.

We working fast and correct, since more than 20 years.

Dear,
In the annex you can find company presentation from Hira-Parts.
We are a company work with countries like : Germany, The Netherlands, Belgium, England, İerland and Romania.
HİRA-PARTS FOR YOUR MECHANICAL OUTBREIGHT
Hira-Parts is a reputable supplier where you can go for outsourcing in the field of
Engineering, Mechanical engineering, Construction work, Sheet metal processing and Machining of metal components in small and large series.
PRODUCTION IN TURKİJE - LOW COST, HIGH QUALITY
The entire production of your hira-parts takes place at the production facility in BURSA - TURKİJE. The reason for this location has everything to do with the advantages in the area of low labor costs which obviously have an effect on price formation. Hira-Parts carries out the production of your parts with a modern machine park which you can certainly find in the .
CNC DRILLED MACHINES FOR TURNING AND MILLING
The machining mainly takes place on CNC-controlled machines that are set up in a separate room. Due to the flexibility we are able to realize your outsourcing of turning and milling work with short lead times. If required, we can deliver your orders in partial deliveries to speed up the turnaround time for you as a customer. The outsourcing turn and milling work can therefore be tailored to your wishes.
ASSEMBLY
In order to increase our added value as a supplier, we can also carry out the assembly of semi-finished products for you. Parts of metal or plastic processed by us or supplied by you can then be assembled with other components.
That saves a lot in man hours.
THE ADVANTAGES:
• Due to the low wage costs, we can achieve a favorable price level.
• Dutch, English, German, point of contact.
• Brokerage firm, so do not push up prices.
We thank you for your interest in our company, and we look forward to a long-term cooperation.

Best Regards / Met vriendelijke groet / Mit freundlichen Grüßen

Ali Bahadır Oral
Production & Sales Manager



DR.Ziya Kaya Mahallesi
Yayla Sokak NO: 2 Daire : 8
P.K : 16600
GEMLİK / BURSA - TURKEY

GSM : +90 543 369 12 77
Web : www.hira-parts.com
E-mail : alibahadir@hira-parts.com

Hofer + Co produces for you
fast and flexible
Precision turned parts

Dear Ladies and Gentlemen!

Our company is doing business Kft Holes in the plastic circle since 1991.
We process and sell engineering plastics as semi-finished products.
The export and import to our very well prepared office and logistically support team with the utilization of the modern time-averaging.
The 8 CNC turning, milling and 10 standard machine and the measurement laboratory are in two-shift operation in use.

Our clients (Audi, Bosch, Phoenix Mecano, Coca-Cola, Claas, GE-Tungsram, Knorr-Bremse, MÁV, Mediagnost, Mediso, Raba, Robot-X ....) entrust us with annual framework agreements and orders.

We produce both simple and very complex parts from what supports our CAD-CAM systems.
The owner Mr. Gábor Holes approximately 25 years engaged in the use range of engineering plastics based our company on the free professional advice.

Our material is specifically with ZX-Brand Name (ZEDEX) sliding bearing material (ZX100, ZX324, ZX410, ZX530 ...) dominate excellent tribological properties.
Each variety has different temperature resistance and flechenpressung.

CosTherm the acquisition is new and a new development area of hard tissue.
The material is mainly ideal for heat and electrical insulation, additional properties have some varieties and very good sliding properties.

More than 20 varieties Engineering Plastics, (PA6G, PA6.6, POM, PE, PP, PVC, Plexi, Polycarbonate, PVDF, PEEK, TEFLON, BAUMWOHLLHARTGEWEBE, EP GC 203 .....) hold different dimensions, dimensions and color, we stock.

Certified Our company since 2005 with ISO9001 and operated.

Gábor Holes
Owner
HOLES Kft

Holtech, your specialist for drive technology


Holtech Antriebstechnik GmbH & Co. KG from Schloß Holte-Stukenbrock is the partner for medium-sized companies in the areas of mechanical engineering and plant construction (eg, wood processing, furniture, food, packaging, automotive), connecting and conveying engineering and special engineering. We recommend as your supplier for Erstausrüstungsbedarf, for repairs and maintenance.

Our stock range includes a variety of racks, spur gears and bevel gears as well as additional components such as shell couplings, clamping rings and clamping sets.

In addition to our extensive stock range, we offer the machining of standard parts, heat and surface treatment as well as complete custom. Technical know-how and the highest level of customer focus and reliability set us apart. And when can we become your partner?

For your inquiries please contact us at the 05207-995650 available.

We are a private company with global presence headquartered in the Slovak Republic and established in 1954. We develop and manufacture a wide range of gearboxes, axles, differentials and drive components. Our products are most frequently used in construction, agricultural and communal equipment and in industrial and renewable energy applications.
Our other primary focus is on the design and development of transmissions, gears and drives in addition to the development of products meeting the highest demands on quality. Our R&D Department continuously works on increasing the efficiency and lifespan of our products and on the development of new products adapted to the needs of our customers.
HS makes significant investments into research and development on an annual basis as well as additional investments into production equipment and increasing quality.

Number of manufacturing facilities: 1
Surface area: 20,000 m2
Total site area: 40,000 m2
Number of employees: 200
Investments 2005-2011: €9.55 million
R&D investments: 5% of turnover

For over 50 years cogs and gears of ILMBERGER are in use worldwide.



Success factors are customer focus, motivated and qualified staff, high-quality technical equipment and versatile products of the highest quality.



As a medium-sized company with short decision paths we offer you the quality-oriented production of gear components.