Impact Wrenches

The impact wrench Master 35 is the world for over 20 years in operation longer than any other gasoline powered impact wrench. He is reliable, powerful, has low maintenance cost and is extremely easy to handle. Ideal for loosening / tightening all the screws compounds. With plug quick-change drill chuck can also be used as a threshold drill.

SCREWS

»Nuts - square, hexagonal, octagonal
»Extenders
»Spacers
»Joints
»Spring retainers
»Rubber rings
»Steel pins
»Special shapes and sizes on request
»Safety quick-change chuck
»Emerging drill 10 to 22 mm diameter for hardwood
»Spezialschäfte and lengths on request

Rail crossbars

The rail Traverse telescope is designed for the transportation of rails and switches parts up to a length of 25.5 m and the installation of switch parts to R = 1200 with two-way excavators.

Sleeper laying trusses

The sleeper laying Traverse is a transport and placing beam for 5 concrete sleepers.When laying in 2 Absetzhüben the threshold distances of 600-750 mm are adjustable. The spacing of the hanger during loading amount to 300-375 mm.

Role Pliers

Track roller pliers SRZ 1 - In a strong-welded body replaceable ball bearing rollers are mounted. These lead the vignol at the bottom of the rail head. The clearance above the wheels 49, S 54, UIC 60 rails, among other things designed for the types S. The Track roller pliers SRZ 1 is recommended for use only by Umsetzböcken.

Track roller pliers SRZ 2 - The Track roller pliers SRZ 2 is intended primarily for the rail replacement with two-way excavators.

Rail transport Pliers

The rail transport gripper STZ 2 R is a stop means for holding and transporting rails of the type S 49, S 54, R 50 and UIC 60 The rail transport gripper STZ R 2 is approved by the Deutsche Bahn AG. The clamp is attached with shackles and a corresponding link.After striking of the tongs, the lever is folded, thereby securing the clamp against unintentional opening.
Upon release of the load and pliers, the safety lever must be turned over in order to open the pliers can. Working without slinger is not possible.

The rail transport gripper STZ 2 R - SB is a stop means for rail and switch parts. It is provided specifically for pressure-sensitive notch rails with plastic jaws that grip the rail head. The rail transport gripper is S 49, S 54 and UIC 60 and others whose head form is enclosed, suitable for transporting rails of the types.

The rail transport gripper STZ 2 R R 60 is a stop means for holding and transporting grooved rails. The gripper STZ Ri 2 R 60 is equipped with locking. The clamp is attached with shackles and one corresponding to the crane hook chain link. After striking of the tongs, the lever is folded, thereby securing the clamp against unintentional opening.Upon release of the load and pliers, the safety lever must be turned over in order to open the pliers can. Working without slinger is not possible.

Rail cars

The track roller is suitable for the transport of track construction equipment, tools and construction material. The track rollers are fully insulated in the wheels and ball bearings. The car has a push stick, which is also used to establish the scooter. The design of the rail roller is possible with grating or wood floors on request.

The equipment cart GWZ is a storage and transport assistance in railway works. He makes transport on construction sites as well as the proper and safe placement of th...

GMAG is a precision turning shop that manufactures mechanical components in various materials such as brass, aluminum, steel & stainless steel. Our work is based on the customer's design and specifications.

Our strengths:

• High degree of innovation in production technologies
• Continuous search for efficiency
• Flexibility
• Constant research for customer satisfaction

• Attention to safety and environmental protection
• Continuous training of employees

Precision and commitment
The CMO GmbH, with headquarters based in Southern Oberheim, characterized by its long experience.
Motivated and qualified employees contribute to the challenges of our customers.
CMO makes high demands on himself

This is thought to both the comprehensive quality as well as to the reliability as a long-term partner. All for the benefit of the customer.
Whether small or large series, whether complex CNC turning part or assembly, we provide the right solution.

• Experience since 1938

• Customer focus

• qualified staff

• Comprehensive quality

• From simple turned parts to the assembly

GMR Endüstri Teknik is a foreign trade company, which is supplying custom made drawing parts and industrial products from Turkish Industry according to variable customer demands. GMR located in Bursa, Turkey where is the heart of Turkish manufacturing industry.

We are focused especially on custom made parts for European automotive manufacturers and their suppliers. We are supplying precision turned&milled parts, cold&hot forged parts, special connecting elements, sheet-metal parts, laser&stamped parts, welded components, aluminium injected parts and cast-iron parts for automotive and various industries.

The range of products that can be supplied by GMR with ease of access to powerful factories located in the surrounding provinces are quite large. Apart from semi-finished and finished products, various raw materials like aluminium sheets and profiles, cold&hot rolled pipes, acrylic sheets, aluminium foils, special packaging goods and all kind of industrial demands can also be supplied by GMR with required certificates and test reports.

For over 17 years the company GMTI, Golz Mould & Tools International UG, reliable producer of high-quality molds and dies for metal, plastic and rubber products for the

Automotive industry and vehicle

- Aluminum and zinc die cast parts such as axles, housing

- Plastic parts such as bumpers, valves, headlight covers, manifolds,
2-component parts, etc.

Lighting industry and electrical industry

- Plastic parts such as sockets, switches and other lighting equipment

Air and space industry and military technology

- Aluminum, zinc die casting and plastic parts for high-precision requirements

Medical

- Custom-made of aluminum, zinc die casting and plastic for high-precision
Requirements

Furniture industry

- Aluminum, zinc die casting and plastic parts such as handles, hinges, rollers, buttons, etc.

Air + cooling technology

- Rubber and silicone parts, seals etc.

Machine Tools

- Tools according to drawing


We manufacture molds and tools for small - and large-scale production, as well as
Prototypes

The dimensions of the parts amount to 1 mm - 3,000 mm

It can be processed part weights up to 20 kg.


GMTI is an international company with manufacturing facilities in Eastern Europe (especially Poland) and Asia.

Together with our cooperation company, we have a large number of experienced staff, from the designer to the machine operator.

Through expert advice, a quality range of precision tools and on-time delivery, fr significant advantages to our customers.

The company Gogarten & Massaro oHG is an existing company since 1999 in the field of metalworking. The company employs approximately 16 professional staff.

The range of services includes the machining of workpieces by machining with CNC machines and conventional machines Turning and milling. Editing is done according to customer specifications, are in the form of drawings or sample workpiece. The company's own machinery and technical equipment on most progressive state guarantee flexibility, on the one hand a fast, high quality and timely order execution and on the other hand a versatility
allows the editing palette.

Our clients include major companies in the fittings, and engineering industries as well as suppliers to the mining industry. Through a partnership with the customer, which includes not only the simple execution according to sample or drawing, but also cooperative solutions to problems that suchT. begin in the design phase, our company was able to acquire a reputation as a guarantor for innovative and forward-looking metal.

Due to the many years of experience The Gogarten & Massaro oHG offers customers a competitive advantage by

a broad and customizable workpiece machining
customer-oriented thinking and acting by qualified staff
customer-oriented production
a professional support in processing occurring problems with the processed products
comprehensive customer and product support
high delivery
efficient service and
a favorable price-performance ratio.

The company is known for timely and geared to the needs of the customer machining of workpieces, with a very good price-performance ratio for the provision of services.

Here you will find a small overview of our products.

Bath tap
Concealed fitting
Component for shower
Outlet for Spültischamatur
When handle different surfaces
Rotating part with cleared inner shaft
When handle with mounting kit

In the turning shop, a wide variety of machining services are provided for a large number of customers at the Bitterfeld-Wolfen site and in the region.

The spectrum ranges from conventional turning to a diameter of 4000 mm and a length of 6000 mm, to mechanical processing on boring machines, 2 of which are CNC-controlled, on vertical lathes, on a cycle-controlled lathe and on various milling and grinding machines -, planing and drilling machines.

• High-Quality Production: Focus on producing milling and turning parts with high-level
quality since the company’s inception.
• Experienced Leadership: Founders bring over 20 years of experience in both product
development and technical support.
• Established in 2013: Gökçe Mekatronik was founded in Çorlu Yeni Sanayi in 2013,
focusing on utilizing advanced technology.
• Advanced CNC Manufacturing: Manufacturing processes are supported by CAD-CAM
technology with 3-axis and 5-axis CNC machines for high-precision production.
• Experienced Staff: The company has an experienced team that ensures the
manufacturing of high-precision, strategic products and parts.
• Efficiency in Production: Uses computer-aided manufacturing (CAM) to enhance
efficiency, with fixture and apparatus designs done in-house to speed up production.
• Special Production Tools: Supplies custom-made cutting tools to increase
manufacturing efficiency.
• Investment in Technology: Continuously invests in up-to-date technology to meet
sector demands.
• Reliable Delivery: Aims to ensure timely and reliable delivery to valued business
partners, both pre- and post-sales.