Since its inception and operation since 1979 our production is based on perfecting and increasing the volume of work from year to year. Now the company is already running the second generation of turners of the Santro family. The management and employees of the company are reliant on the fact that quality is the task of each employees, and the goal in every business is zero errors. Target goals can only be achieved through continuous learning and investing in knowledge, and enhancing the company's technological level. Strategic goals: – to become and remain one of the leading metal processing companies – to operate socially responsibly, and positively comply with all legal requirements regulations – to have satisfied employees – to educate employees about new technologies – the establishment of a supervisory system during production – to invest in new equipment and tools – to to continue the trend of growth and development of the company and increase profits The services we offer in metal and plastic processing include: – CNC turning – CNC miling – turning – miling – cutting with a saw – grinding – welding – installation The satisfaction of our customers is our quality measure!

The company BR-electronics is an international company with customers in the aviation and space technology, communications technology, medical devices, mobile technology, railway technology, automotive and industrial electronics. We are a system supplier, offering everything from a single source. BR electronics are characterized by a wide range of connectors, adapters and components for applications in the following areas: * Communications Engineering * High Frequency Technology * Data Technology * Network Technology * Industrial Electronics We also have an extensive range of products in automation technology. In our production facilities, we manufacture and develop individually for you: * Data Cable * RF cable * Power supply cable * Network Cable * Ribbon cable * Stranded * RG cable * Sucoform cable * Semi-Flexible Cable as well as special cables with and without encapsulation in Hot Melt technology. All this of course with the utmost professionalism. In addition, we produce complete computer control for base stations and industrial applications that can also be customized according to customer requirements. The close and long-term collaboration with the most powerful international manufacturing plants in the industry and our own development, we can get the maximum performance for your application. BR-electronics has its own cable production for the manufacture of RF and data cables as well as its own electronics business with customer-specific control devices and components for the RF technology.In addition, BR-electronics has its own machining with CNC machines both in the field as well as milling Turning. Excerpt from the product range of systems engineering: * Signal distributions * Fan Trays * Financial Statements (termination) * Through terminations * Attenuators * Attenuator * RF relay * Video Relay * Signal and Power Divider * Surge * Mini-PC's * Industrial PC's * Cabinets Excerpt from the product range of CNC turning and milling: * RF-proof enclosures for electronics and RF microwave technology * RF-proof casing with variable platinum bearing edge * RF-proof hybrid housing with inch dimensions * RF housing for installation of TO8 thin film / thick film modules * Profile housing made of rectangular tube with lid and base in different versions * Profile housing in width

Gempper Manufacturing Technology GmbH is a young, dynamic and family-run business that was established in 1991 in his parents' house in the sideline. In 2007/08 entry of the two sons in the family business. Through continuous investment in new computer-controlled manufacturing equipment and the tireless efforts of our staff, combined with skill and enjoyment of new challenges, we have made our company grow healthily. We have specialized in manufacturing small and medium series, single part production, production of prototypes and assemblies. Our products find their use in well-known manufacturers in the areas of mechanical and vehicle engineering, climate and environmental engineering, electronics and model making. Through our versatile machines we can cater specifically flexibly and precisely to your needs - and with maximum accuracy.

Shovel d.o.o. is a manufacturing company, based in Croatia. We are currently operating as a full scale manufacturing company, but our primary proffesion is industrial design and prototype manufacturing, leading to full scale serial production. Shovel d.o.o. is established 28.8.2014 and it has been working on high end MTB parts, but for expertise in the field, we have expanded our field of operations to a full scale production. Our fully deisgned, developed and manufactured products can be seen on www.shovelcomponents.com , and for our outsourcing operations we still do not have the website, as we are taking only long term projects, so we do not need a website. We believe Techpilot will bring our services to the targeted countries such as Germany, Switzerland, France, Belgium, etc. Looking forward to receive any inquires regarding all fields of operations that we can supply. Marko Carević, CEO of Shovel Component

Aksantaş; was founded in Bursa, which has more than 15 years of experience in the automotive industry and is the solution partner of the leading companies in the sector (passenger, bus, truck, military vehicle, defense industry) in the field of metal forming. All forming processes (pressing, mold making, CNC bending, CNC cutting, welding, assembly) can be carried out in-house and in our own equipment. Our machines and systems consist of presses, CNC cutting and bending machines and welding machines that are equipped with the latest technology. Our customer-oriented company, quality, cost and timely delivery are the main principles. Product quality is ensured by control systems, laboratory tests and inspection tests for the products, which are used in every step from the use of raw materials to the product output. Aksantaş, which occupies an important place in the metal industry, is ISO 16949 certified. The customer satisfaction indicators that are important for our company and which continue their activities with the latest technology and trained personnel are carefully monitored and evaluated.

Automotive supplier. Main activities: - Pressing - Part cleaning - Welding (robotized) - CNC machining - tools - fixtures - uniqe machines

Officine Meccaniche Merendoni Srl, a company located in Spello in the province of Perugia and present in the Umbro Aerospace Pole, is established in the field of applied precision mechanics and finds maximum expression in the fields, such as civil and military aeronautics, aerospace, energy, railways and mechanical industry in general. Specifically, our company specializes in the production of mechanical components obtained through machining on conventional and computerized numerical control machine tools for turning and milling. Solutions OMM is mainly characterized by its great attitude to be at the forefront, investing in new machinery and in research and development activities. By focusing on precision mechanics, the company has the obligation to produce products with a high quality, which meets the required standards. From this point of view, the quality of the activities is denoted by the certification first of ISO 9001 and subsequently with ISO 9100.

We are a leading manufacturer of state-of-the-art, top-notch vacuum components, either large series and/or tailor-made batches ! We are committed to matching our precious customers material handling requirements with the best solutions on unrivalled terms and conditions. We are looking forward to a successful collaboration with you. Please feel free to contact us -24/7-, I will be utmost delighted to submit you an unbeatable offer. Thanks in advance for having us. Diamantino S. ISIKCEVAHIR (MSiE) (Global Business Development Manager)

We specialize in the production of complex and high-demand metal products, for the needs of the automotive and hydraulic industries and agricultural machinery. With a highly productive machine park, we achieve short delivery times and high quality. We use modern equipment from the world's top manufacturers. As a young company, we respond to your wishes quickly and adapt to your specific requirements. Excellent work organization enables us to integrate all parts of production well. A highly experienced team of CNC operators and continuous investment in training make it possible to solve the most complex customer challenges. Optimization of processes, people and production times enables us to have an excellent quality-price ratio and proven quality products that are technically sophisticated.

Company „Vitalii & Son“ has been developing and producing stretch moulds for PET bottles and containers even since this technology first took off in 1988 in Bulgaria. With our many years of experience, we guarantee the optimum design and contruction of the blow moulds to give you the best possible bottle quality. We have detailed knowledge of all the different types of machines. Thanks to our own manufacturing technologies, and especially our high end generation machines, we achieve the shortest possible lead times. In our well-equipped blowing laboratory, a wide range of tests and inspections can be performed before the start of production. Leading bottle makers value our competence and make regular use of our services. We concentrate our knowledge on the classic decision, we refuse to make the quick-change mould because we deeply believe that the life of this type of the moulds are short. We never forget about people who install the moulds. Large Moulds Our know-how extends up to “containers” with a content of 5, 10, 12, litres and even 5 gallons in a wide variety of shapes. Our design department is familiar with the special features of these large containers and the possibilities of production on the various types of blowing machines. Comprehensive advice for such projects is available to you at any time. Hot-Fill Blow Moulds We have already produced a large number of steel moulds for the hot-fill technology. Through the development of own manufacturing technologies, we reach smooth surfaces. We cut the manufacturing costs for those moulds considerably and in the same time reduce the weight of the moulds.

MAKRA Ltd was founded in 1999. The company works and develops in the area of metalworking and also has its own machine tools with CNC and has a section with universal machines. Our custom-made, highly precisioned parts have different diameters, grooves, outstanding quality of which we are happy to show you. The company has a measuring machine – TESA Micro-Hite 3D, which helps in achieving high precision in working –out and measuring the workpieces. The company has its own developments, such as: High Pressure Cooling System (HPCS) Suction system for taking coolants out of the machines’ tanks System for removal of parts outside the machine (for lathe machines) Pinch for pulling up rods (for lathe machines) The company provides processing details of different types details by a drawing given from the customer, and also develops technologies for processing details. Our specialists are constantly aiming at improving the quality of the services we offer.

FROM TRADITION TO INNOVATION TGS started its industry adventure in early 70s by the production of machining products for gas springs and various fields of industry. Our early gas spring production steps started in 1992. In 2008 we started exporting our products to european countries and established our export company Tunatek Ltd. Co. for organizing our all export operations.

We would like to introduce ourselves to you as a new competent supplier in the field of contract manufacturing: - CNC turned parts (ø 1 mm to ø 300 mm - long turning + short turning) - CNC milled parts - CNC grinding (up to ø 50 mm) - Module assembly - tumbling - Laser marking - Sandblasting Examples of the products: pistons, eccentric axles, needles, outer bearing rings/ inner bearing rings, spacer sleeves, screws, bushings, plugs and many others. Our references: Dürr Systems AG, ABB Technologie GmbH, Röhm GmbH, Liebherr Components GmbH, Bosch Rexroth GmbH

Protek Makina is established in 2007 by Mr. Okan Bahceci - Mechanical Engineer and we are able to manufacture precision machined parts by turning & milling with our state-of-art machinery. We are manufacturing semi-finished parts from steel, stainless steel, brass, plastics, aluminum and other metal parts. In addition, we are also able to deliver to our customers fully heat-treated, painted, polished parts.

BAUR METAL TECHNOLOGY is a medium-sized family, the ever-located since 1980 in the expansion. The company founder Manfred Baur stood at the beginning two employees to the side. Due to the development of the company moved in 1997 from Weissach im Tal-break after Unteraspach, the original 250 m2 production area were tripled in a new building. In several stages, the production area was expanded to today 2000 m2. The current MB-team of 10 employees leads customer orders still just as promptly and flexibly through, like 20 years ago. The metal is still the core business of Markus Baur. By investing in machinery that Leistungssprektrum is constantly being expanded. Products: We produce samples of parts, small-medium series in the area turning milling drilling, turn (10 mm to 80 mm and a length of 650 mm), mill (10 mm to 1 560 mm, width 10 mm to 750 mm, height 2 mm to 750 mm Speed ���up to 10 000 1/min). The production of steel, aluminum and V2A modules on our 3D welding hole table length 50 mm x width 50 mm height 50 mm, up to 2500 mm wide x 2500 mm high x 12 500 mm long, with partial machining CNC and lacquering in our paint shop ev mounting. We can weld steel, aluminum andn V2A TIG, MAG welding workshop DIN 18800 part 7, our authorization for the production of oil-bottom trays according to WHG § 19I is up to date Steel sheet blanks of 1.5 mm to 10 mm (to a length of 3000 mm / V2A 1.5 mm to 6.0 mm to 3000 mm.) Our paint shop was extended and modernized in 2008, the painting of small parts (width 100 mm x High 100 mm x length 100 mm) and machine components, cabinets, furniture, truck vintage cars, trucks, containers, machinery, etc. is available with different coating processes possible, eg : spray gun, Ayrlis high and low pressure possible (Dimensions: Width 4000 mm Height 3700 mm Length 12 500 mm). We manufacture special-tow bars for cars and trucks with TÜV certificate seit1998. - Gantry crane up to 4.5 T, forklifts from 1.5 to 6.0 tons. - At the programming station DXF files can be edited. Everything in one hand Planning & Construction Advice Production Delivery Assembly Customer Care

Visit www.cadcon.de our website and find out everything what is important.

Thanks the high technological machinery, we the Iovine High Tech Srl, operate since 1970 as a supplier in the field of mechanical precision machining; We offer technologies such as grinding, drilling, turning, and are particularly specialized in milling. We can offer this both as a complete delivery as well as operations. We work with drawing parts in medium size (max. 1 meter), where particular finishing’s are in higher accuracy required with very small tolerances. OUR MACHINERY CONSTITS OF: No. 6 CNC Drilling No. 4 CNC milling machines No. 5 CNC lathes No. 3 CNC grinding No. 1 Meassuring tool Tesa micro-Hite 3D One of our best machine is the MCM (machining centre manufacturing) 1200 Clock, costruction year 2016, with the following technical features: Number of axes: 4 Axes Stroke: 1.200mm x 850mm x 850mm Pallet Dimensions (mm): 630x630 / 630x800 Rapid feeds (m/min.): 75,0 Rotary table - number of positions: 3.600.000 Rotary table – rotating speed (rpm): 50 Tool taper: ISO 50 / HSK-A100 Max torque (Nm): 372/372/0 Power (Kw): 58,5/58,5/0,0 Spindle rotating speed (rpm): 8.000/14.000/0 Linear axes measuring system: pressurized Heidenhain optical scales Rotating axes measuring system: pressurized Heidenhain encoders Vertical continuously rotating table: Yes Being on the market for many years, Clock 1200 ensures high precision, speed and reliability. The X axis guide on two different levels makes the carriage unit extremely rigid, globally increasing machine performance and cutting volume. Equipped with the vertical continuously rotating table, Clock 1200 can turn into a multitasking machine capable of turning, milling and grinding. This machine has a tool magazine with 500 seats and a pallets magazine with 60 seats. We have the coordinate measuring instrument 3D Tesa Micro Hite, Year, 2014. OUR QUALITY: We have tools to ensure the quality of products in terms of standardized control plans. For special needs, we are able to use the quality requirements that have been agreed with our customers. The company is certified according to ISO 9001: 2008.

SteelWERK GmbH is fully focused on the machining of steel and other metal alloys. Most of our customers work in mechanical and plant engineering. For them, we usually work on turned parts such as flanges, weld-on rings, collars and wear rings for pipes and elbows, which are used, for example, when pumping solids such as concrete. Our core competence: CNC turning of turned lathes Ø30 - Ø560 mm CNC turning long parts up to 2028 mm long Sawing of Round material up to Ø530 Square material up to Ø530

GMAG is a precision turning shop that manufactures mechanical components in various materials such as brass, aluminum, steel & stainless steel. Our work is based on the customer's design and specifications. Our strengths: • High degree of innovation in production technologies • Continuous search for efficiency • Flexibility • Constant research for customer satisfaction • Attention to safety and environmental protection • Continuous training of employees