Construction 2.5D and 3D
burn
weld
glow
radiate
CNC milling and boring machines to 10to

Deformation of cold rolled strips with press:
In the field of classical stamping production is possible on eccentric presses from 40 to 250 tons, as well as hydraulic presses up to 250 tons. The product size ranges up to about 500 mm in length and 4 mm in thickness.

Fine blanking:
Fine blanking is a special technology or so-called punching "without air" between the Schneidematrize and the knives (0,5 - 1,0%). This method is especially useful for highly sophisticated products in question, which are dentate different. The maximum length is about 500 mm, and the maximum width of 6 mm. This allows the tolerance of + / - 0.01 mm, a uniformity of the cut edge and the clipping with minimal needle on the edge.

Drawing and deep drawing:
Deep drawing is a mode of production, with the preparing various hollow shapes such as rivets, drawing dies, industrial electric parts and the like. The diameter ratio to the length is up to 1:2.5. Of course, these products have a smaller extent, forExample up to 20 mm.

Screws:
TKG doo manufactures screws of the small range in diameter from 2 to 6 mm and using the most advanced technology of cold deformation, which has displaced pivot screws in the world due to their cost-effectiveness.

TKG provides doo screws forth in accordance with the ISO and DIN standards. We also produce special screws design according to the plans and patterns in collaboration with technologists and designers of customers. Screws can be thermally edit and galvanically protect, depending on the location and type of operation.

''TMD Hanibal'' Limited Liability Company was estabished on September 1st 1999 when it privatized a part of the then motor parts factory ''TMD Gradačac'' and opened a production plant – tool shop.

Tool shop ''TMD Hanibal'' Ltd was founded with a tendency to implement the highest technology in order to meet the high quality standards required by customers. Our goal is to become development partner to companies in European Union countries. Focusing on goals of our customers, recognizing customers' needs and relying on continuous improvement and education based on teamwork and cooperation, our team is ready to respond to the demands of our customers and offer the best solution. Our team consists of 60 workers, of which 5 machine engineers, 3 administrative workers, 30 experienced CNC technicians for machining centers, 20 experienced CNC scraping technicians, as well as grinders, toolmakers and locksmiths.

We undertake the manufacture of complete assemblies and machines, according to the needs of your company, targeting to the maximum efficiency for your production. We utilize new technologies and production techniques to benefit our clients; the constant renewal of our equipment and renovation of our facilities prove our commitment to this goal. We also run a commercial section, offering a wide range of industrial components, spare parts, tools and raw materials.

Tyrpanis Company was founded in 1968 by Ioannis Tyrpanis. Νowadays, it is being administrated by his sons and is situated in Lefki Xanthis, Greece, in proprietary facilities of over 3,000 sq.m. After 50 years of experience in the machine shop industry, it is considered as one of the top greek machine shops and retains partnerships with major technical companies and research institutes.

We strive for the constant modernization of our equipment and internal procedures, aiming for the best outcome with our products and services.

We perform various types of analyses in ferrous metals by use of SPECTRO laboratorial spectrometer, identifying the material of the provided sample. Our CNC machining operates in 3, 4 and 5 axis, using lathes and vertical machining centers by DMG MORI and Doosan Infracore.

We are able of performing lathing and grinding works in shafts of length up to 8,000mm and diameter up to 1,250mm.

We utilize a full instrument set of SKF for full alignment of pulleys and shafts, induction heater for easy and correct bearing placement, stroboscope, as well as a portable balancing device.

We perform operations of steel carbonization and hardening, using specialized immersion furnaces by Durferrit.

Smart Factory team specializes in 3D printing, modeling, milling, scanning, measurement and quality control. We perfectly master the intelligent engineering digitization of three-dimensional objects, their modeling and bio-mechanical simulation methods, 3D metal and plastic printing, 3 and 5 axis milling techniques. We work with hard metals, marble, carbon fiber, plastics, ceramics and other materials. By applying 3D scanning technologies, we capture people, items, structures and natural objects in their spatial – three dimensional copies using flat image with the aid of specialized photography equipment.

U. Eitner
Tooling, EDM & Plastic GmbH
Benzstr. 7 D-64807 Dieburg

Ask us!
For over 25 years we have manufactured to approximately 1500m ² and bearings on 1000m ²

Tool and die
All equipment needed for tool available eg Senk - and
Wire EDM.
Max 3T tool Total weight approx 25 Tools / year

Engineering and CNC machining
4 CNC lathes and machining centers 4
Milling: Max X1800 - Y750 - Z750, 3, 4 and 5 axes.
Rotate: Max diameter 800mm

Plastic injection molding
10 Arburg injection molding machines, max. 150T, fully automated.
Automotive, electrical and thermal engineering
about 30 million plastic parts parts per year.

The company UKM Vehicle Parts GmbH has specialized in the production of precision parts with a high technological content. Through our years of experience we have established ourselves as a reliable partner. Our customers are automobile manufacturers or reputable suppliers in the automotive industry.

CNC contract manufacturing for tool, machine and plant construction.

Do you build tools, machines or special machines?

Do you need precision parts for your machines and systems?


We take over the CNC manufacturing. Contract manufacturing for mechanical engineering, tool making or mold making. Take a look at our manufacturing examples!

We manufacture highly efficiently on modern machining centers quickly with high quality and on time. Leading machine manufacturers have been relying on our production since 1989.

We are a small CNC contract manufacturer with an emphasis on precision and flexibility. We are generally geared towards staying in contact with our customers for longer and creating a solid basis for handshake quality. We currently employ 5 excellent employees with whom we sometimes implement the seemingly impossible implementation and customer requirements in the shortest possible time. We look forward to your valued inquiry.
Werner Unterberger + team :)

Manufacturer of precision turned parts with hardened and ground surfaces.

precision machining of mechanical parts and assemblies incl. material-supply, heat- and surface treatmernt

For more than 70 years, our engineers, foremen and skilled workers as machining - professionals for you, our customer, in use.

Again and again we face the challenge at a high level to turn your ideas and designs into reality. Quality and reliability are no strangers to us but the motive of our actions.

We manufacture both items, series and assemblies including assembly, according to your specifications and drawings. Upon request, this also includes procurement of materials, heat treatment and surface protection.

Other services, such as development and construction of your project also part of our product range.

We offer the production of your components from a single source.

Save time and money. Take the opportunity to relate your needs with us as a warehouse demand "just in time".

Take advantage of our experience and know-how in the field of pattern, single part and series production on CNC machines and machining centers!

Precision engineering,
Docking Systems for Semiconductor Industry,
Wafer bumping machine,
Wafer horder,
Wafer Cassettes,
Wafer carriers,
Hand tools automotive industry,
Fender, disassembly tool
PCV-nozzle
Robot nozzles,
Nahtabdichtdüsen,
Seam sealing,
Subcontracting,
Paint Planer,
extended workbench,

We are a mechanical company located in Poland, and we help companies to establish their businesses in Central and Eastern Europe.
We are dealing of mechanical breanch, we are evidencing services of constructive and executive machines and appliances.

Few words about our company.

We are produce: equipment for poultry slaughterhouse, equipment for dairies, stainless steel tanks, roller, belt, screw conveyors.
We offer services of welding stainless steel.

We are looking new orders for stainless steel production, do you know company who looking for manufacturer or subcontractor?
wamasz.pl