Discover specialized suppliers for follow-on composite tools on Techpilot. Our platform connects buyers with suppliers who manufacture high-quality tools for various applications. Use the e-sourcing process to find the best suppliers.
We manufacture since 1938 metal products for technical uses, punched, laser cut, bent, bent, deep drawn, pressed, drilled, threaded, countersunk hardened. Our range includes filter screens with or without borders, disc springs, washers, saddle washers, high precision shims, complicated shapes (with or without bends or deep trains) with total or consequential cuts, etc.
We have not formed a department for surface treatments, but thanks to good relations with relevant specialist firms also get this.
Punched parts made of all metal or of plastic sheets such as nylon, Teflon, insulation, polyester film, fiber, PVC, laminated paper, pressboard, etc. belong to our product range. Thanks to a large stock of raw materials, with more than 1,300 different varieties or thicknesses we can deliver at very short notice.
The tools required for our manufacturing are produced in our own tool shop.We can advise you when planning or designing a part, in order to develop the most economical solution.
Our specialty: R total - in the quality design, concentric and flat, of any material suitable for punching, even small series. General Tolerances: + / - 0.05mm. Since we make mostly non-standardized rings according to the special requirements of our customers, we do not hold the finished goods warehouse.
Your advantage: It is worthwhile to consider whether twisted washers could be replaced by punched in every respect. In addition to pricing advantages, the choice of material is particularly less concentrated towards higher strength and corrosion resistance.
Our viewable and downloadable here (HTML table) tool list (see website) will show you our facilities. This tools not included can be produced at short notice and with excessive costs due to the internal normalization.
Ask us.
The list (see homepage) contains the existing complete sections that are constantly updated. Moreover, we have for cases where the preparation of a complete section due to small numbers does not justify a large number of simple circular cuts.
These can be for diameters over 50 mm within the substance is technically possible in two passes, ie outer and inner diameter punched separately while maintaining concentricity, combine arbitrary. This with a tolerance of + /-0.1mm. Another reason to ask us!
Further manufacturing opportunities exist for smaller series from 120 - 1200 mm diameter at a max. Material thickness of 3 mm (circular shear).
Founded
1938
Employees
Certifications
Freienbach
Switzerland - 8807
Welcome to Dino welding technology!
Exceptional performance and quality are always the result of a thorough planning. Our work does not begin in production, but always starts with the first customer conversation. Customers are cooperating successfully for years with us know exactly appreciate it. On a production area of 3,000 square meters to advanced equipment and highly qualified professionals to meet in order to achieve the best possible quality in common. We consider it to assist in all areas as an important task our customers. This thinking and action has made us a reliable partner of many major companies.
Founded
1995
Employees
20 - 50
Certifications
Herborn
Germany - 35745
Disentis in Graubünden mountain world: Where other people go on holiday, arise in our modern, efficient work "ideas in metal" from design to manufacture high quality product.
Our experienced team of specialized and motivated staff is proud to vouch for versatility with the highest precision. "
Toolmaking:
High-performance hot runner molds for the processing of technical thermoplastics and thermosets | injection molds for the processing of technical thermoplastics and thermosets with all gate systems | Pressure die casting molds for the processing of aluminum, zinc and magnesium | punching & bending tools for the processing of steel, aluminum, copper, etc | Our mold & mold sizes include: injection, punching bending & die casting tools from 96x96 to 596x596 mm | Sampling: We sampled at the customer's injection molds up to a closing force of 950 KN.
Machining
Highest accuracy in the production of small and large series is self-evident for us.
Thanks to modern machinery and high quality tools we achieve a highly favorable cost - benefit ratio.
We process: series of 5 to 50,000 pieces of steel, aluminum and non-ferrous metals up to 1000 x 650 x 500 mm.
Component technology
Co-development, prototype manufacture, fabrication of parts, procurement of commercial goods and electronics, as well as the installation, the wiring, final inspection and shipping worldwide.
Punching and bending technology
With our unfassenden know how we can make even the most demanding customers satisfied eg in the electronics industry.
Thanks sophisticated tool technology, we are able to punch in one step, turn and rivets.
With machines up to 70 tons we process all materials between 0,01 and 4,0 mm.
Thermal and surface treatments are carried out in our responsibility.
Coil fabrication
Through our manufacturing experience and meeting deadlines, we can meet the high demands of a large number of customers worldwide meet.
In our manufacturing centers, we process: round wire 3-5 mm, imTakt of approximately 10 pieces per minute.
Rectangular wires of 3.15 x 7.1 x 0.6 mm to 5 mm can be edited manually.
Founded
1988
Employees
50 - 100
Certifications
Disentis
Switzerland - 7180
DK-manufacturing technique employed for 30 years with the construction of machinery and equipment
for different industries (automotive, building maintenance, electrical, petrochemical).
Furthermore, make CNC milling and turning parts as well as conventional machining parts forth as wage labor.
We have a modern day machines with controlled axes and a CAD / CAM system for manufacturing of 3D parts.
Founded
1996
Employees
< 5
Certifications
Kamen
Germany - 59174
Would you like to know which suppliers are ideally suited to your requirements?
Register now and submit your request.
The dmb Metal Processing GmbH & Co. KG was founded in 1992. Today, the company specializes in individual deliveries of assemblies of metal for the automotive, electrical, furniture and fittings industry, and mechanical engineering.
Activity:
- Project Management
- Construction
- Prototype production
- Tool
- Welding components and sheet metal parts
- Surface finishing
We realize for you to modern manufacturing equipment:
- Metal moldings,
- Safety components,
- Assemblies and
- Complex bending parts.
Modern high-performance machine tools and a skilled workforce are the basis for flexibility, productivity and quality. Our in-house-house tool design and build for you:
- Follow-on composite tools
- Welding devices
- Sequence of steps and tools
- Additions and mounting devices.
Quality is not just the result of a monitoring function, but the result of continuous value improvement and planning ahead. Our quality assurance department is working with:
- 3D CNC measuring machines,
- Train, Druckuniversalprüfmaschinen,
- Measuring microscope,
- Coating Thickness Gauge,
- Ultrasonic thickness gauge,
- Hardness testers as well as
- Weld inspection.
Founded
1992
Employees
100 - 200
Certifications
Grünhain- Beierfeld
Germany - 08344
D + M Z��gel GmbH was founded in 1984 in Schiffweiler / Heiligenwald.
In 1989, the company relocated to Überherrn / Altforweiler
in the industrial street.
Since that time our company has grown continuously.
Already in the founding year, we became suppliers to the company John Deere,
CLAAS and Kuhn.
In order to meet customer wishes and requirements,
In 1995 our production was extended to 3 halls.
In 1996 Rubber Technology became reinsurer of Terex Demag.
As a medium-sized company, you will find our products everywhere,
where precisely stamped and processed parts made of rubber or PVC for the
Industry needed.
Through close cooperation with our customers we are able to
optimal solutions and dimensionally accurate products - also in economic
Respects - to offer.
Our expertise, our modern production facility and our high
Quality standards guarantee consistent quality and punctuality
Delivery of our products. Our quality standard has been decreasing since 2002
DIN ISO 9001: 2008 certified.
With our experience and our technology, we are the right competent
Partner for your business to meet the challenges of the future
to encounter. Our long-standing customers confirm our capabilities
grown partnerships.
Founded
1984
Employees
10 - 20
Certifications
Überherrn-Altforweiler
Germany - 66802
Mission
With the innovative products, interesting for the market, we enable growth and development of the Domel group and assure positions of employment in wider environment.
Values
In Domel d.d. we appreciate:
1. Creativity
2. Care for our customers
3. Responsibility
4. Spirit of enterprise
5. Open communication
6. Care for our employees
7. Cooperation
8. Ambitiousness
9. Loyalty
10. Care for local environment
Management system
Domel is known for a long tradition of providing the highest quality products and processes. This focus is also demonstrated by its quality management systems certificates. Domel received the ISO 9001 quality management system certificate back in 1992.
The company develops environmentally friendly products and technologies, reduces emissions, manages waste prudently and uses natural resources efficiently.
Environmental management system
Domel has an environmental management system that provides for effective control and the reduction of damaging effects on the environment. The company develops environmentally friendly products and technologies, reduces emissions, manages waste prudently and uses natural resources efficiently.
The company conducts itself in accordance with the strictest standards in all of its activities, as evidenced by the ISO 14001 certificate, which Domel successfully renews on a yearly basis.
The company's environmental policy sets out its responsibility to the environment, which applies to all employees and those that work on behalf of Domel.
Founded
1946
Employees
500 - 1000
Certifications
Železniki
Slovenia - 4228
About Us
Dopfer Precision Mechanics and Maschienbau is a company that specializes in high-precision machine single and serial parts. Founded Dopfer Precision Engineering
in 1991 in Gabelbachergreut. To continue meeting the high demands of precision ments, the company was relocated in 2001 after Zusmarshausen in a newly built hall of 500 sqm.
The expansion allowed for an extension of the Maschienenparks as well as the expansion of the team to the now five dedicated and skilled Zerspannungsspezialisten belong.
We all work with the common goal is always to meet the needs of our customers through inovation and skill.
Production
Is produced on machines with the highest quality standard. We work with both conventional and numerically controlled lathes and milling machines. In addition, a surface grinding machine, shielding gas are - and Wig welding equipment for steel-VA and Aluschweißung available.
As a further core activities we can offer you work-hardening, Teniferbehandlung, as well as plasma Trier works. Cylindrical grinding or assembly can be carried out at the request enbenso.
Service
We specifically to your wishes and advise you in choosing the right material and to show you the best manufacturing process for your product. Of course, we help you find the right solution for problem cases. We have special-purpose partners or contacts with designers and control farmers. This gives you the security of knowing that when your tasks a komptenten contact person at your side.
Founded
1991
Employees
< 5
Certifications
Zusmarshausen OT Wollbach
Germany - 86441
We are your reliable partner for the following areas:
Tool mold
Plastic injection
Punching and bending technology
We manufacture according to DIN EN ISO 9001-2000 and offer our customers:
Expert advice
Product Design
Tool design
Surface finishing
Hot and pad printing
Assembly
Founded
1970
Employees
20 - 50
Certifications
Tettnang
Germany - 88069
Professionalism for your product
DRAWA Erodiertechnik offers over 18 years of experience, advanced production equipment and comprehensive advice about your product. As an established partner of the automotive industry, tool making and mechanical engineering, our know-how in the planning phase are available, so you control production costs and use working effectively.
Founded
Employees
< 5
Certifications
Lage - Lippe
Germany - 32791
The Dr. Dietrich Müller GmbH, based in Ahlhorn (Lower Saxony), has long proven itself as a successful service provider for the manufacturing industry. The focus is on the development and implementation of customized solutions for the manufacturing processes of the respective partners.
The Dr. Dietrich Müller GmbH is one of the world's largest suppliers of electrical insulation materials, seals and heat conducting products.
The company is certified for quality management according to ISO 9001 and listed as a recognized repackager by UL. This means that all UL-approved materials retain their approval.
Solutions for motors and generators
We develop, manufacture and supply flexible and rigid electrical insulating materials for motors and generators using materials from leading manufacturers worldwide. All insulation parts can be supplied by us.
Solutions for air and oil cooled transformers
The insulation system is crucial for the service life and functionality of oil transformers and dry-type transformers.We deliver ready-to-install individual parts and kits.
Solutions for electronic products
In addition to electrical insulating materials for electrical insulation, we develop, manufacture and supply products and systems for cooling electronics, particularly in the fields of medical technology and aerospace.
Solutions for mechanical engineering and vehicle construction
Composite materials are becoming increasingly widespread in mechanical engineering and vehicle construction. We support in the development and manufacture of ready-to-install parts and systems.
Solutions for batteries and accumulators
We supply insulating films, battery separator films and thermally conductive materials.
Support for research, development and universities
With the multitude of manufacturing processes and available materials, we are the right partner for solving your challenge.
We process ul-approved materials from leading manufacturers.
Founded
1967
Employees
20 - 50
Certifications
Ahlhorn
Germany - 26197
Founded
Employees
Certifications
Vrbno pod Pradedem
Czech Republic - 79326
Dr. Franke GmbH & Co. KG are nationally and internationally as
recognized partner in the field of stamping and forming.
The field-proven know-how is based on a
many years of experience from the beginnings of plate lock-
technology to modern technology in sheet metal forming.
Here you have a dedicated development and
Staff team is available that with sound knowledge
a wide range of manufacturing dominated alternatives.
° STAMPING
° DEEPDRAWING
° FINEBLANKING
° WELDING
° MOUNT
° COATING
° CONSTRUCTION
° TOOL
° PROTOTYPE
With individual, custom manufacturing for large-
and small series presents Dr. Franke GmbH & Co. KG is the
constantly changing product and logistics requirements of the
international industrial
Only by Dr. Franke documented real customer focus.
Founded
1865
Employees
50 - 100
Certifications
Solingen
Germany - 42657
S.C.Dr. Köcher SRL – 100 employees
Bucharest / RO
* Research and development
* Tool design and construction for aluminium die casting
* Die casting moulds for aluminum and zinc alloys and plastic injection moulds
* Aluminium casting house
* Machining
* Mechanical Steel Constructions
* Primary CNC-Machines Components
* Krause Products sales
* ISEL Automation CNC Machines sales
* CNC OEM applications(laser, plasma, welding etc.)
Founded
1998
Employees
50 - 100
Certifications
Bukarest
Romania - 021784
Drölle your partner for stamping and forming.
We offer individual, high quality and innovative solutions in the field of stamping parts, stamping and forming.
With us, you are correct! Get an overview of our company, the product portfolio and its broad range of applications.
As a medium sized company we are with years of experience specialist for stamping and forming.
The focus of our company is the production of stamping drawing and precision cut parts and the assembly of complete assemblies that are now sold at national and international level for years.
Our customers are leading manufacturers of household appliances, automotive, aerospace and electrical engineering industry. Our own precision tool guarantees the accurate production of customer wishes and the advice from the prototype part up to the standard part.
A motivated team of employees and large flexibility in the organization, speaking for the highest quality and technical advice.
Founded
1987
Employees
100 - 200
Certifications
Schwäbisch Hall-Sulzdorf
Germany - 74523
Would you like to know which suppliers are ideally suited to your requirements?
Register now and submit your request.
DROP INDUSTRY is specialized in precision machining and distribution of press tool and moulding parts.
The skills proposed are milling, turning, EDM wire cutting, grinding, assembly for all kind of series.
The company is based in Besançon.
Founded
2019
Employees
< 5
Certifications
Villers Buzon
France - 25170
Wage work in the working techniques MAG, NC turning, CNC milling, boring machine, wire cutting. Construction of tools, in particular tools for punching, notching, bending, forming and composite tools up to a size of about 2000x1000 mm and a weight of up to 5 Mp design and construction of welding and handling devices of all kinds
Founded
1995
Employees
20 - 50
Certifications
Obergurig OT Singwitz
Germany - 02692
Die Firma Eberhardt Werkzeugbau GmbH besteht seit 1977 und versteht sich als Full-Service-Unternehmen, das Ihnen alles komplett aus einer Hand liefert: Von der Konstruktion über die ersten in 3D lasergeschnittenen Prototypenteile sowie Fertigteilen mit Messbericht bis hin zum einbaufertigen und prozessfähigen Werkzeug, mit dem wir für Sie auch die Teilefertigung auf unseren eigenen Pressen übernehmen können.
Founded
1985
Employees
50 - 100
Certifications
Cleebronn
Germany - 74389
Since 1971, convince the achievements of our house in a highly competitive market of the tooling and prototype construction. Uncompromising quality, the profound
Knowledge and commitment of our staff, and the latest production technology shape our corporate philosophy. To design innovative and professional product solutions and produce, is our daily challenge that we perceive competently and with great joy.
Founded
1971
Employees
50 - 100
Certifications
Gütersloh
Germany - 33334
Our company specializes in eroding wire and sinker EDM.
Drilling holes from 0.1 mm upwards with start hole drilling technique.
Here we work mainly tools and tool holders, internal cooling cutters, thread formers all kinds of solid carbide tools.
Clamping means such as SK 40 shots Cool Strem or Cool Tool holes.
Another pillar is the payroll processing in CNC milling.
We also build complete tools here, we have specialized in the field of extrusion technology.
From the individual Bohrunge on complete components to functional tools we are your partner.
Services it big ...
... 24 hour, around the clock, including weekends!
1) Tooling Extrusion Technology
2) Complete manufacturing items / small lots
3) Functional and start drilling
4) Wire EDM
5) die-sinking EDM
6) CNC - Milling
7) Turn conventionally items
8) laser welding
9) Quality Assurance
Founded
2000
Employees
5 - 10
Certifications
Waldmössingen
Germany - 78713
Find the ideal supplier in just 1 minute
Communicate directly with buyers
Unique market price comparison to realize the best prices
Existing processes, systems and suppliers can be easily integrated.
Buyers use the platform completely free of charge
