As a system supplier for electromechanical assemblies, we manufacture plastic and metal components using hybrid technology. This means that we concentrate on the production technologies of plastic injection moulding and punching and bending of metal components.

The advantage for you is that you can obtain ready-assembled assemblies of the most diverse production processes from one source.
By moving Friedrich Joerg GmbH in 2016 to newly built production and office premises, we were able to create a capacitive buffer.
Thanks to a high degree of automation, we can offer you particularly competitive prices.

We manufacture manually in small series up to large series fully automated and pre-assemble all components for you. In short, we adapt flexibly to your requirements.

We provide support as early as the product development stage in order to take into account quality, cost and tool-specific aspects in the early phase.
We manufacture the necessary tools or devices in our own tool shop. This also allows us to increase our flexibility, for example in case of short-term changes.
Furthermore, we also offer finishing processes such as: printing on plastic parts (cliché/pad printing), hot foil stamping for a particularly noble appearance of the products, machining and ultrasonic welding.

It goes without saying that we are certified according to ISO 9001:2015 and deliver a very high and consistent quality.

We would be pleased if you contact us.

categories:
Electromechanical assemblies; Foil hot stamping; Customised plastic mouldings; Plastic optical fibres; Optical fibre components; Optical fibre systems; Optical fibre technology; Optical fibre transmission systems; Pre-assembly Assembly of small parts for industry; Assembly of plastic components; Assembly of mechanical components; Stamp-bending parts made of stainless steel, non-ferrous metal, steel; Stamp-bending tools; Connectors; Connectors for surface mounting; Complete plug connections; Pad printing; Thermoplastic precision mouldings; Thermoplastic overmoulding with plastic; ultrasonic welding of plastics; overmoulding tools for insert parts; 3-D MID components; connecting terminals for power cables low voltage & high voltage; component assembly; die casting; mould making; housings for the electrical industry; terminals for electrical cables; plastic injection moulded parts; plastic injection moulded parts with metal insert; electrotechnical plastic parts; technical plastic parts; plastic processing; multi-component injection-moulded parts; plastic-injected metal parts; product development; prototype construction; terminal blocks; technical injection-moulded parts; thermoplastic elastomer (TPE) moulded parts; jig and fixture construction; toolmaking; two-component injection-moulded parts;

Imprint: https://www.friedrich-joerg.com/kontakt/impressum/
Privacy policy: https://www.friedrich-joerg.com/kontakt/datenschutzerklaerung/

We are Slovenian engineering company in the field of mechanical engineering.We are present in various sectors of the industry across Europe (Austria, Germany, Switzerland and Netherland)
Our advantage is that you as our customer have only one business partner who covers the entire EX-YU market for products. We also guarantee our clients a timely delivery and the quality. of your orders.

PEOPLE WITH EXPERTISE AND EXPERIENCE

As a customer, you benefit from our generation-spanning experience and high quality awareness our specialists, which they continuously pass on in the company and in training. When it comes to tightest tolerances, complex geometries and demanding surfaces, REINER is your contact partner.


ZINC DIE-CASTING
With zinc, extremely filigree or thin-walled, technically high-quality parts can be cast and a very high degree of accuracy is achieved. In addition, zinc die-casting guarantees high productivity even with small quantities and, thanks to its durability, is a very interesting economic process.
At our location in Furtwangen, zinc die-cast parts with a part weight of up to 700 grams cast in die casting machines with a clamping force of 5 to 125 tons. With a maximum clamping area of 400 x 600 millimetres, we cast the alloy Z410.


MIM - Metal Injection Moulding
In series production, MIM opens up completely new technical possibilities - right up to highly complex geometries and always with optimised cost-effectiveness.
Cross holes, internal and external threads, gear teeth and surface structures are easily integrated into the component by MIM. The process combines the freedom of plastic injection moulding with the properties of metals. At REINER, a selection of low-alloy and stainless steels is used here.


PRECISION CUTTING with forming technology
In the field of precision stamping and forming technology REINER offers a range of processes and technologies for high-precision stamped and bent parts. Fine punching, hydraulic bending processes, NC punching or NC bending are as much a part of this as laser cutting.


ASSEMBLY SERVICES
Thanks to our expertise and range of services as a specialist component manufacturer, we can also process complete assemblies, partially assembled assemblies, components, system assemblies and assembled individual components for you. A unique selling point of REINER in component assembly is the vertical range of manufacture, which starts with the sketch plan if required. In the in-house development center, engineers are available at CAD stations to work out plans and transfer them seamlessly into the production of the components.


TOOLBUILDING
We are your partner for mould making, precision stamping tools and devices.

The equipment:
- CAD / CAM for design and production
- sink and wire eroding
- Surface, profile and jig grinding
- Most modern CNC programming technology
- HSC milling
- Coordinate measuring technology for form and pattern measurement
- Centres for machining
- Services from the design to the finished component.

In addition to the design and manufacture of tools and devices, we carry out maintenance and repairs ourselves.

The ETS Stainless GmbH was founded in 1984 in Stuttgart as ETS Edelstahltechnik Stuttgart.
We are a medium-sized company with 4 divisions
- Stainless Steel Sheet Metal Working
- Metal
- Grating Manufacturing
- Hot-dip galvanizing
and currently employ approximately 60 employees.
Our headquarters is located approximately 50 km south of Berlin.

1- EXPERIENCE
Z. MEK INDUSTRY is run by professionals who have over 20 years of experience in the field of precision engineering. Thanks to this experience, we are able to tackle complex projects and offer high-quality solutions.
2- TECHNIQUE
Our multi-pallet CNC machining centers are equipped with the latest technology, which enables us to process small, medium and large batches with maximum efficiency.
3- VERSATILITY
We supply a wide range of industries, including the oil and gas industry, the food industry, and agriculture. Our versatility allows us to tailor solutions to the specific needs of each customer.
4- FLEXIBILITY
Thanks to our technical department, we are able to carry out processing according to the customer's mechanical drawings and technical specifications, thus ensuring a high-quality end product.
5- ACCURACY
Every detail counts. Our focus on precision and compliance with measurement tolerances ensures that every product meets or exceeds quality standards.

We produce stampings, precision springs, and wire forms for the automotive, electronics, computer hardware and lighting industries, among other sectors. Virtually every material is processed by our modern, highly flexible CNC automated machines, allowing quick machine set-ups. Our in-house hardening oven, grinding shop, and assembly equipment further facilitate the timely processing of semi-finished parts according to our customers demands. Perfect surface treatment of our products is guaranteed by plating firms close to our operations. These factors make a quick reaction to customer demands and short lead times possible.

The company was founded in 1959 as the metal goods factory H. and K. Heinz oHG and adopted by the thin sheet metal Eschenburg 1985. 1987 was converted into a limited company under the leadership of managing director Klaus Schmidt



In our modern equipped operating we work
Steel and stainless steel as well as brass and aluminum.



What is your part?



We manufacture your parts

according to drawings or samples,

from 0.5 to 4 mm in thickness

in sizes up to 1,500 x 3,000 mm.



Prompt. Precise. Perfect.



For surface treatments, we've been working together for many years with reputable partners.



Our company stands for quality. For accurate and flawless order processing, we are known. See for yourself and you will find that we have promised you too much. We are pleased to add business relations with you.



We have the ideal techniques for small, medium and large series. In high quality. Fast, inexpensive and very flexible. Even if tomorrow a prototype is needed.

Our company since its founding in 1780 to the processing of metal and has successfully specialized in the course of the last century, among other things stamping and wire bending technology.

Technical possibilities

Stamping:
 punching machines from 40 to 400 tons of pressure
 all material qualities: bright, galvanized, aluminum, brass and stainless steel, from 0.5 mm to 5 mm
 plate widths from 20 mm to 450 mm
 component connections in the tool (metal and plastic)
 sequence editing and Follow-on composite tools
 finished catching products
 surface treatment

Wire bending technology:
 different wire bending machines
 wire thicknesses of 2 mm to 10 mm
 processing of bare, galvanized, stainless steel and aluminum wires
 finishing operations:
* Welding, chamfering, recesses, threads
* Cutting, drilling, crushing, etc.
 component connections (metal and plastic)
 surface treatment

FOX is already active internationally and seeks to improve its national and international presence and continues to edit about potential promising Neumärkte / Neubranchen intense.

We, Funke Werkzeugbau GmbH, are proud to offer you a wide range of high-quality products that are tailored to the needs of our customers. Our main focus is on the development and manufacture of punching and forming tools that ensure maximum precision and efficiency. With many years of experience in the sector, we are able to deliver tailor-made solutions that meet the specific requirements of our customers.

We also offer prototyping services to help our customers turn their ideas into reality quickly and cost-effectively.
Our 2D laser cutting allows us to create complex shapes and designs
to cut with maximum accuracy, while our bending service ensures that your components get the desired angles and shapes.

We place great value on quality and innovation and use cutting-edge technologies to ensure that our products meet the highest standards. Our dedicated team works closely with you to successfully implement your projects. At Funke Werkzeugbau GmbH, we focus on your needs, and we look forward to accompanying you on your journey as a partner.

Tools of GDH
Need smart tool solutions or the realization of complicated processing problems? From planning and design through the development of the individual components to the construction of the finished tool: GDH is in the design and manufacture of tools for sheet metal processing since 1992 competent partner. Our strengths are our deep-drawing tools especially when multiple trains are required. Tools we manufacture as an insert, consequential, Progressive and transfer dies, both for prototypes, as well as for series production up to a maximum weight of 10 tons.

Deep-drawn parts of GDH
We manufacture drawn parts made of all metal forming materials to be processed. Materials such as steel, stainless steel and nonferrous metals are brought with us into the right shape. The processing at a material thickness of 0.3 mm - 10 mm thickness up to a pressure of 800 tons possible. We manufacture according to your drawings, CAD data, and according to your samples.Their tools are taken or produced in-house.

In addition, we offer the possibility of deep drawing simulation with single trains in our house.

Pressed parts of GDH
With us you get spun parts from all metal forming materials to be processed. Materials such as copper, brass, steel, aluminum, stainless steel, tin, and zinc are staying with us in the right shape. Rotationally symmetrical workpieces are to oä to a round plate size of 800 mm in diameter with an initial sheet thickness of 6 mm in St, 4 mm in VA, 8 mm in CU / CnZu. and 10 mm in Al manufactured as pressed parts. We manufacture according to your drawings, CAD data, and according to your samples. Their tools are taken or produced in-house.

Laser Technology at GDH

Lasers:
We laser in 2D technology in possible sizes 3000 x 1500 mm.

maximum thickness
* In VA to 12 mm
* St to 20 mm
* Al to 6 mm

In 3D technology routes of sizes 3200 x 1525 x 600 mm are possible.

Maximum thickness here
* In VA to 4 mm
* St to 8 mm
* Al to 3 mm

Punch Technology GDH

Punching:

Up to a print capacity of 120 tons from the tape.

Up to 800 tonnes in the insertion process.

Punching and forming tools with its own tool. Production in lots of 1-100000 St.
Processed materials:
Steel sheet: 0.5-10mm
VA-sheet: 0.5-3mm
AL-sheet: 0.5-5mm
MS sheet: 0.5-4mm, Cu sheet: 0.5-4mm
Rod material are 15mm thick and 6m Length
max. Tool dimensions: 900 mm
max. Press force: 2500 KN
Tube processing to D 200mm
Deep drawn parts to D 250mm

G.Honsel Aluminium Processing GmbH
Your partner for series production

In addition to creating our own product lines, we specialize in solving customer-specific problems. Together with you, we develop tailor-made product solutions so that perfect results are always achieved.

Our focus is on cutting-edge processing technologies such as milling, sawing, drilling and punching, which have been specially developed to meet the requirements of series production. We know that reliability and consistency are key to producing high-quality aluminum products on a larger scale.

Our customers not only appreciate our down-to-earth approach, but above all our reliability and quality.

Satisfied customers from various areas such as window construction, façade construction, noise protection and solar speak for our expertise.

We do everything we can to provide you with precise and lucrative solutions that exceed your expectations.

Glatec is your reliable partner for manufacturing subassemblies from metal. Glatec collaborates with companies from the electronic, machine building, home appliance and furniture industries. Glatec is one of the leading producers of fittings for beds and kitchen appliances in Europe.

Our production is set up for manufacturing components and subassemblies in order quantities from 5000 to 500’000 articles. This allows us to react promptly and flexibly to your requirements.

We focus on processing sheet metal, varying in thickness from 1 to 5 mm, coils up to 400 mm wide. We operate three automatic feed presses with a pressure range from 630 to 2500 kN. For separate operations, presses varying from 100 to 2500 kN in force are available.

Stamping, bending and progressive dies are designed and produced in our own tool making shop. We also produce our automation solutions inhouse.

For quality assurance 3D measuring equipment is available in-house. All CNC controls are linked into the company network. Programming of the machines is done with NX CAM Express.

Locking and Hardware
Industrial Components

What began in 1852 as a bolt forged in the heart of the Sauerland, today offers a range of more than 6,500 products. With our own numerous design and utility patents, as well as patterns provides GAH innovations since 1852!

GAH is now a company with about 430 employees, which has five locations on three continents ist.In Germany, Europe and the world GAH has developed into the fourth generation of the successful and expanding Sytemanbieter for commerce, trade and industry. About 6,000 pan-European trading partners trust us every day.

In addition to first-class products made of sheet steel, aluminum, stainless steel and non-ferrous metals, we also provide the process reliability our customers desire. We process plate and strip material in thicknesses of 0.2 mm to 5.0 mm.

Metal spinning:
- Diameter of D = 10mm to D = 1'500mm
- Material thickness of s = s = 0.5mm to 6.0mm
- All metals (aluminum, stainless steel, steel, titanium, silver, gold ...)

Deep drawing:
- Width across corners component of E = E = 10mm to 1'800mm
- Material thickness of s = s = 0.5mm to 6.0mm
- All metals (aluminum, stainless steel, steel, titanium, silver, gold ...)

Metal spinning:
(Http://www.metallumformung.ch/de-de/metalldr% C3% BCcken / beschrieb.aspx)
Take advantage of the possibilities of this interesting process. If the metal press used by specialists, achieved by no other forming process particularly for single pieces or small series its economy.

Deep drawing:
(Http://www.metallumformung.ch/de-de/tiefziehen/beschrieb.aspx)
Less is often more! With the possibilities of deep drawing we can produce items where other methods are dependent on the assembly of several parts long. Use this advantage with integrated cost reduction.

The GW St. Pölten is a modern industrial enterprise blank. The focus of the company with around 440 employees ranging from industrial parts manufacturing to production of components and complete systems. Advice during the development and construction phase completes the offer. Thanks to the greatest possible flexibility, the company is fixed and competent partner for many customers at home and abroad.

Long ago, the GW St. Pölten has made as a modern problem solver a name. The different production areas such as metal working and processing, electrical installation, signage, etc. are equipped with advanced production facilities and therefore allow a high degree of vertical.

The high standard of management, production and the products and services is impressively confirmed by a number of certifications in the fields of quality, environmental management, occupational safety and product quality.

The ÖNORM EN ISO 9001:2008 certificate and the Austria Quality Seal are the best evidence.

OUR PRODUCTS AND SERVICES

Metalworking and PROCESSING
Machining and Forming Technology with advanced CNC machines, assembly of complete assemblies, components manufacturing including surface treatment, serial production, sheet metal fabrication, welding and much more.

ELECTRICAL ASSEMBLY / CABINET
Partial and final assembly of electrical components, control systems, and manufacturing of complete enclosures and cable assemblies for mechanical and soldering work.
Unlisted panel builder in accordance with UL 508A Manufacturer processed wire and wiring harnesses.

SIGNS PRODUCTION, milling, engraving, POWDER COATING
Signs in single or serial production to production of building control systems, including on-site installation.

GENERAL ASSEMBLY
Installations of all kinds, execution of various packaging, Kuvertierungs, sorting works and recycling activities.

TEXTILE WORKS
Curtain assembly and sewing of all kinds with the exception of clothing confection.

Plastic injection molding / ZINC DIE-FOUNDRY
Injection molded plastic parts to glass fiber reinforced plastics.
Production of zinc die castings and surface finishing including finishing and assembly.

HMT Inside.
Jung.Unkonventionell.Wild.

We machine, weld and assemble - from simple to highly complex parts.

Our wide product range offers you many advantages: they reduce the number of suppliers, thus saving expense in purchasing and optimize the quality and quantity of your purchased parts. Consider HMT as "internal division" of your company - through open communication, flexibility and adapted processes, we can create together a successful long-term partnership for the future.

In addition, you benefit from our network, consisting of competent partners in the areas of surfaces, heat and other treatment techniques.

It's the mix!

We are your partner that responds quickly and flexibly to your current production needs and at the same time not lose the vision. We are actively trying to make your life a little easier, through adherence to agreements and by personal, ongoing consultation and cooperation.

We support you ...

... already in the development phase to the production of prototypes and their production engineering optimization.
... throughout the product life cycle with series parts - from a few to tens of thousands of pieces per year.
... continually and demand-oriented with spare parts.

We supply ...

... to order (Build to Order):
The requested batch size to the desired delivery date. We pack and label the various components true to your specifications and compile them into matching commissions.

... suppliers controlled (Vendor Managed Inventory):
We take responsibility for the assets of your purchased parts. Through continuous communication and exchange of inventory and your production plans we will optimize your inventory and purchasing costs and respond quickly to fluctuations in demand. So you can quickly and act flexibly in a dynamic, fast-paced market.