Subcontractor. Production of sheet metal parts. CNC punching, lasercutting, bending and welding.

The Mechanical workshop Wunderlich GmbH was founded in 1985. The focus of the company are in the areas of CNC metal processing, welding, punching, bending and forming. In 2008 the company was taken over by the current managing director Jürgen Flaig and - with the aim to achieve further specialization Grade - modernized rapidly. The production capacity of the company, the technical equipment and the demands on qualified employees grew steadily since then - step by step, year after year. Today one finds a modern manufacturing facility in the industrial area of Selb, only 2km away from the driveway to the A93. Our customers are located in very different industries and find us versatile and competent contact for metalworking. We are able to manufacture a very wide range of products able, ranging from one-off prototypes or replacement parts to high volume series production. We are particularly strong in the milling of large components on envelope, within the tolerance range of + / - 0.001. So workpieces of up to 4.000kg are workable on our horizontal milling machine. By now, we are in a position on our state of the art fully automatic circular saw for aluminum profiles of all types and solid material to cut highly accurate and reliable process and edit. Some technical details: • CNC-controlled machining of turned parts up to a diameter of 920mm and a length von1.050mm axially and radially driven tools offer the possibility of finishing in a single setup. • Conventional turning complex parts up to a diameter of 1.020mm and a length of 3,000 mm. • CNC-controlled processing of milled parts: a 40-tool magazine and reduction of non-productive time allowed an enormous rapid traverse rate, input power 40kw and spindle taper SK50 size. • Conventional milling of complex parts or small series. • CNC-controlled machining of large milling parts: 5-axis horizontal milling machine, machining of workpieces of up to 4.000kg in a single setup, tolerance + / - 0.001 mm, spindle power 63kW, pulling force of 2,000 kg axles, spindle taper SK50. • Pull grooves or grooves evacuate to a hub length of 350mm and a groove width of 42mm. • PLC controlled sawing aluminum: our state of the art fully automatic circular saw for aluminum combines the speed and cycle times of common pneumatic saws with the precision and accuracy of cut of a hydraulic system. Continuously variable speed, 15kw drive for stable average values even with aluminum solid material up to 115mm. • Mechanical eccentric presses up to 250 tons and hydraulic presses also to 250t, which are suitable for a muted die cushion also for deep drawing. • Various welding jobs for steel, stainless steel and aluminum for TIG and MAG. • hall crane for parts of weldments up to 8 tons. • Also strong we are in the turning of small parts as well as in laser cutting and bending. • Our partners assist us in processing with the following method: Galvanic zinc coatings of any kind, pickling, hot-dip galvanizing, painting and powder coating, nickel plating, tin plating, chrome plating, Hartaufchromen, Maßhartaufchromen, plasma and gas nitriding, carburizing and vacuum hardening. The company is certified according to ISO 9001:2008. Worldwide, our products are used, which requires high level of responsibility and quality. A goal that we face every day.

The powerful, modern machinery, which was founded in 1958 M. Cap GmbH includes automatic punching machine, eccentric and hydraulic presses and a 2D laser cutting system. The development and construction of tools and tube bending belong to the range. From prototype to mass production you receive everything from one source. Punching, pressing, drawing: With a press force of up to 400 tons. be processed up to 6.0 mm strap width up to 630 mm and strip thicknesses. Steel bar can be stamped up to 200 mm x 20 mm and bent be. Toolmaking: Together with you we develop the economic and technical sinvollste solution for your applications. In our tool, we design and produce for you advanced composite tools with CAD, CAM, CIM, CNC-based manufacturing. 2 D laser cutting: The process completes our manufacturing program. On our 5 kW laser system, we can process the following material thicknesses: - Up to 25 mm mild steel - Up to 20 mm in stainless steel - Up to 12 mm of aluminum Tube bending: On CNC controlled rotary rollers and mandrel bending machines we process pipe sizes from 4 mm to 50 mm diameter.Steel pipes, copper pipes, brass pipes, stainless steel pipes. Welding: We manufacture complete assemblies including MAG, MIG, TIG and projection welding process. In the case of large numbers and the highest quality standards effective Robot installations. Further processing: Cut to Mehrspindelbohrwerken and we form thread to M20. The surface of our products can be improved by trovalizing if necessary. Galvanic processing procedures as well as paint and powder coatings gehöhren with the delivery. Quality Management: Our company is certified according to ISO 9001:2000. With modern 3D measuring machines and Prüfleheren we constantly monitor the quality of our products.

Wilhelm Becker GmbH & Co. KG in Mettmann manufactures the comprehensive range of technical, cold-formed springs made of wire and strip. Stamped parts, stamped and shaped parts made of wire and strip are also part of our production focus. You get the complete product range for your demanding applications from a single source. It is irrelevant whether they are products made of wire or strip material. Our high-performance tool construction implements the innovative solutions of our tool design and ensures a smooth start-up and series support.

SHN STANZSCHMIDT GMBH & CO. KG Since 1924, SHN STANZSCHMIDT has been convincing by innovation, top quality and reliability. SHN STANZSCHMIDT is known for high demands on geometry and precision. Whatever your challenges, with SHN STANZSCHMIDT you have the optimal partner. You get everything from one source. We combine development expertise and decades of experience in serial production. This increases your efficiency and benefits. In addition to the development and design, it is the material selection and the appropriate surface that determine your added value and the optimal function of a punched product. Our experts (experts) will advise you on the many options to find the best solution for your requirements. STANZTECHNIK We mainly produce coils with fol- low-cut and follow-up tools. Our production is equipped for all requirements: with eccentric presses of 25 to 250 tons of pressing force.With belt widths up to 300 millimeters. With strip thicknesses starting at 0.15 millimeters and ending at 5.0 millimeters. TOOL We accompany your planned medium- or large-scale production series with production tools Made by SHN STANZSCHMIDT. 1. Advantage: This allows us to support you from the outset in the development and planning of your product idea - technically, logistically and cost-effectively. 2. Advantage: We implement all necessary maintenance measures and repairs flexibly and at short notice. 3. Advantage: By our own toolmaking, we have changes quickly under control. That is why adapting to the product at SHN STANZSCHMIDT is efficient and fast and cost-effective for you.

KeyTec is an ambitious, global supplier of metal, plastic and combined metal/plastic high-precision components and assemblies. Originally formed in 1980, the company was divested from Philips Electronics N.V. in 1999. Flexibility, speed and customer focus are key assets that we use on our journey to becoming the preferred supplier of electro-mechanical components. This is our promise to our customers. We provide High Precision Metal and Plastic Components & Mechatronic Manufacturing Solutions (MMS) in selected application areas. Within these application areas we are a successful developer and producer of modules and products for companies with a focus on technology innovation. Our USP's are automotive quality, paired with flexibility, in house engineering and provider of quick affordable tooling. Our Production Technologies are: * cutting * Deepdrawing * Injection moulding * Insert Moulding * Reel to reel injection moulding * Assembly (electrical and mechanical) * Surface treatment * Laserwelding * Soldering * Ultrasonic welding * clean to line deliveries for cleanroom operations We focus on automotive and medical markets and further produce for customers in Precision engineering, Mechatronics, Optical industry Vacuum technology and glass to metal sealing Advanced Materials We have a broad experience in the use and application of less standard materials and exotic alloys. We perform deep drawing, stamping, laser welding and turning on metals and alloys like: Kovar or Fernico, Titanium,Oxygen free Copper, pure Nickel, Molybdenum, and Nitinol

We deal with on-site production and assembly of stainless steel and aluminum equipments, products and parts. Our Hungarian - owned company was founded in 1996 . Since 1982, the core members have been exclusively engaged in the manufacture and installation of stainless steel equipment, so we have more than thirty years of specialized professional experience. Our office building In the early years we worked in a 100 square meter rental property, which gradually expanded to 200 and then 400 square meters as machines and tools were added. In 2003 we bought a 3,300 square meter stand-alone building. Our current workforce consists of 18 well trained locksmiths and welders. In the 550 square meter workshop you will find machines for sheet metal working, lathes and milling machines, modern welding equipment for welding stainless steel, as well as grinding machines and tools for aesthetic finishing.

We are a wage system supplier in mechanical and plant engineering. we support our customers in the development, design and creation of assemblies or manufacture and assemble the parts, assemblies up to entire machines and systems based on technical drawings. Processing of stainless steel, steels, non-ferrous metals contract manufacturing: - Laser / plasma cutting - Edge - weld MIG/MAG and TIG - To construct - statics - CNC machining

The company Karl Rieker KG was founded in 1936 as a hardware store. Over the years and decades, our focus shifted to the Manufacture of fabricated metal products, in particular the Beschlägebau for furniture and kitchen furniture. Our products in the furniture fittings based on own developments or to customer requests for drawing. Due to the existing machinery we are also capable of other Industries to operate. Punching from coil, lasers, welding on robots, assembly work of assemblies and final inspection, machining of metals. Constructions of new products on 3D CAD systems and a separate tool construction for stamping progressive dies, jigs and fixtures is available. Surface treatment: electroplating, galvanizing, powder coating, painting with long-term partner companies

Wagner Zerspanungstechnik GmbH & Co KG and its participating companies produce iron and non-ferrous metals for various industrial sectors. Main product groups are: - Milled and turned parts - Aluminum die castings - Aluminum extrusion profiles - Stamped and extruded parts It can be used for small batches, prototypes and large series.

Buerstätte stamping and forming Your competent partner for stamping parts, bending parts and deep drawn parts • In-house tool with its own design • Own prototypes built • punching machines up to 300 tons press force and 8 mm thickness for stampings progressive dies • Deep drawing presses up to 600 tons press power and up to 20 mm sheet thickness for deep drawn parts, bending parts and stampings • Buerstätte specializes in stamping parts with small to average annual production amounts • Typical annual quantities of 500 pieces to 500,000 pieces • Buerstätte is extremely flexibly to your deadlines • Quality according to ISO 9001:2008 The two basic production lines be as follows: Production of medium and large series Stamping parts, bending parts and deep drawn parts Stamping parts in batches of 5000-500000 piece Production on composite tools Production via stamping presses up to 300t pressure Material thickness up to 8 mm Punching from slit strip (hot rolled, cold rolled and stainless steel) Bandwidth up to 350 mm Production of small and medium series, inlaid intricate parts Stamping parts, bending parts and deep drawn parts Stamping parts in lot sizes from 500 to approximately 5,000 Production of stamped parts and bent parts on eccentric presses between 35t and 180t printing performance Production of deep drawn parts and bent parts on hydraulic presses between 40t and 600t printing performance Material thicknesses up to 20 mm Punching sheet metal strip Strip widths from 15 mm to 500 mm Company Information • Founded in 1961 - almost 50 years of experience and innovation for your stamping parts, bending parts and deep drawn parts • 30 employees • family - famili

MENDI Metal Innovation Group is a company based in The Basque Country (North Spain) with over 50 years of experience producing complete Hydraulic, Pneumatic and mechanical assembled units. Due to accumulated experience during all these years, we have specialized on mechanizing components of different materials, big size tubular components within high dimensional requirements and high precision inner diameter finishing (honing). We work under drawing, satisfying customer requirements and MENDI guarantees the delivery of our products (tested) within the deadline agreed. Therefore, we have started to offer our services and manufactured products to other Press Manufacturers abroad. Recently, MENDI has created its own sign of quality which is TUBULAR ZERO which defines by 6 characteristics our more valuable strengths related to high precision machining of tubular components. Apart of that, we are currently developing a new Business Unit by integrating a welding specialist company within MENDI Group. On the other hand, in order to ensure customer satisfaction, we are able to certificate the quality of our services by means of a ZEISS CMM machine. We are also constantly investing on machinery,technology or personnel,thus improving and optimizing fabrication processes.

As a medium-sized company, which originally comes from the electrical engineering sector, we have developed into a powerful partner in the field of housing construction and sheet metal processing. In the area of housing construction, we can fall back on our own program, which ranges from small and table housings to cabinet solutions, which we can also adapt to customer specifications. In addition, we are also active in the field of contract manufacturing, where we implement customer-specific projects, be it from laser or folded parts to welded constructions or sheet metal assemblies.

The tooling was founded in 1906 and currently employs 60 people. Focuses on the areas of tool and equipment, as well as contract manufacturing in the field of machining and EDM. Our customer base spans virtually all areas of automotive, capital and consumer goods industry and includes many names that are at the forefront of the world market. Construction We design our tools in 3D mainly on Catia V5 from IBM. In addition, eligible for 2D and 5-axis machining Tebis and Cadda V4 used. The data is done with dial name or e-mail in the IGES formats 2 - and 3D, VDAFS, CATIA, DXF or DWG. Toolmaking * Follow-on composite tools * Cutting and punching tools * Bending Tools * Stamping and pressing tools * Foil cutting tools * Foil deep drawing tools We design and manufacture according to supplied designs presented or patterns, tools up to a size of 1200x4000 mm and a weight of max.25,000 kg. State of the art production facilities make it possible to edit the design in 3D CNC-controlled production to initial sample inspection reports on 3D measuring machines, virtually any data and drawing documents. Years of experience and a largely self-trained staff allows us to implement safe production of complex tasks in the situation. Precise milling and wire EDM in air conditioned rooms give us the opportunity to manufacture cutting tools with an average gap of less than 10 microns. In series production, we rely on machining centers manufactured by Heller with a pallet changer. With speeds up to 16,000 min-1 and rapid traverses up to 90m/min and aluminum parts are to be machined economically Jigs and fixtures * Welding equipment * Benders * Drilling, milling and turning device * Testers * Handling Systems Another mainstay is the manufacture of devices for the mechanical manufacturing, welding machining and measurement and testing tasks. Certified welders ensure a stable basic structure, annealing furnaces for stress-free post-processing, and milling machines up to 5 axis for precise stop points in space. Modern 3-D coordinate measuring machines also help in free-form surface area to verify the accuracy measure to record and document. Contract Manufacturing CNC milling CNC turning CNC Surface Grinding CNC Wire EDM CNC sinker EDM Conv machining Welding Heat treatment Measuring and testing

m s d - steel design msd, based in the Sauerland region, is your innovative partner for individua single components, system components and assemblies made of metal or plastic and specified electronics. We develop, produce and offer logistics services with a own warehouse. msd was founded in 1996 and is located in Finnentrop (Olpe) & Bottrop. With our competence network of 5 companies, we have a daily capacity of 250 employees and thus guarantee performance, flexibility and reliability. Designing & development Procurement and disposition exact sheet metal processing Surface treatment Mechanical processing / machining Sealing / gluing / foaming Installation of specified electronics Assembly, test and inspection

Technical Trading Dreh-/Fräs-und for sheet metal parts

Our Services: - Laser cutting - Punching / nibbling - Bending and folding - Welding - Deburring / chamfering - Vibratory Finishing - Glass bead blasting - Assembly production - Surface treatment The company KM sheet metal working GmbH been able to establish a name as a strong and reliable partner in sheet metal processing in the past decades in the Rhine-Main area. A team of competent professionals, with years of experience in the machining of sheet metal parts and assemblies, help you with any questions on the sheet metal processing to the side. With machines that are on the cutting edge of technology, we can offer from laser cutting punching and bending over all production procedures that enable it to produce large series as well as prototype parts. Our loyal customer base includes, among others in the food industry, medical technology, plant construction, mechanical engineering, electrical engineering, and the petrochemical industry. You are looking for a reliable partner who will support you with your parts? We accompany you from the initial idea through the development and construction and the first production and assembly to delivery into your home.

Technology + Research & Development for a 100% “Made in Italy” Supply Chain A 100% Certified Italian Supply Chain which, since 2004, has been awarded the ISO 9001:2015 Quality Management System Certification followed by the BS OHSAS 18001:2007 Occupational Health and Safety Management System Certification, because the ‘Quality of the Product’ goes hand in hand with the ‘Quality of Life’. The strong attention to the ‘Details of Quality’ will lead F.lli Perin to also obtain the MOCA Certification, which guarantees processes that do not transfer to steel substances that are dangerous to human health or that could compromise the organoleptic quality of food. But the new frontier will be the Green Economy, where words such as Sustainability, Environmental Impact, and Energy Efficiency, with the acquisition of TEE Securities, give an idea of a new, imminent success. It all started in 1960, when Giovanni Perin, armed with knowledge and experience in the sector, decided to start his own business and soon became the reference point for that ‘Industrial District’, the Inox Valley, which in the meantime was developing in Veneto, between the provinces of Treviso and Belluno. Today, in its third generation, F.lli Perin srl is a world leader in the processing of stainless steel for the production of components for large systems in the Ho.Re.Ca., community, industry, and furniture sectors. A success story for a company that is capable of combining the experience of the ‘founder’ with research and technological development, paying special attention to relationships and guaranteeing a 100% ‘Made in Italy’ supply chain. Research & Development are fundamental because they allow us to have a competitive advantage through products and processes projected into the future, but it also means acquiring suitable tools. F.lli Perin, with a program of 2 million euros of investments in the last 2 years, now has cutting-edge equipment, including a Mitsubishi Fibra laser with automatic loading and unloading of the latest generation, for an even greater reliability of production. Why choose F.lli Perin? Because from the ‘Certified Italian Supply Chain’, to ‘Research & Development’, to ‘Continuous Improvement’, up to the affirmation of a ‘Strong Global Personality’, F.lli Perin has established itself on the international market with recognized competence and determination. A company history that, over the turn of two centuries, has translated into a management of the highest specialization and motivation capable of governing a dynamic technological system always aimed at the total satisfaction of the design needs of customers while also developing and proposing new ‘technological concepts’ like the new coloured surfaces that combine strong aesthetic appeal with the usual consistency and reliability of traditional stainless steel.

Since 1997 our company serves to its customers in the sheet metal industry associated with perspectives such as high level of quality, flexible solutions, and rational price strategies. We have strengthened our corporate identity by using the advantages of innovative, flexible, and success oriented management style. Making accurate investments at the right time turned our company into one of the companies who is well known and admired in the industry. The company is based in Istanbul Beylikdüzü Industrial Area in 5.500 meter square production field. By using its experiences, corporate structure and flexible solutions Sarimet exports sheet metal parts to FRANCE, ENGLAND, GERMANY, SWEDEN and SWITZERLAND for more than 8 years. By using CNC Laser Cutting, Punch Cutting, Bending, Profile Bending, Roll Bending, MIG and TIG welding, Profile Cuttings, Perforated Cuttings, Guillotine Cuttings, Assembly and other sheet metal processing tools, we can supply a lot of services to our customers in just one place. Reviewing the current customer portfolio, we can define our basic customer identity as Machine Producers, Industrial Shelf Producers, Server Cabinet Producers, Elevator Producers, Industrial Kitchen Cabinet Producers, Automobile Suppliers, Industrial Air Conditioning Producers, Rack Cabinets, Personal Safe Producers, Metal based Storage producers and so on, As a consequence of high level experiences that have been accumulated since its foundation, Sarimet evaluates the expectations of its clients correctly. We make difference for our clients who have top-end demands from its supplier. Today Sarimet continues its rapid progress by a vision that takes into account of the deficiencies in its sector. As a company who attributes its success into its clients, we are working harder in order to answer your demands by high quality products, appropriate prices, and quick services which are hard to find in one place. We would be glad to do business with you in order to satisfy your challenging expectations.